Laser engraving - Import export

Even hardened material can be engraved with laser engraving. In doing so, the engraving is applied up to 1 mm into the hardened material, e.g. hardened or coated tool use. This is an alternative to areas that are difficult to access.

In an environmental simulation, assemblies are subjected to defined environmental conditions to validate their behavior under those conditions. The variables of an environmental simulation test include climatic aspects such as temperature (cold, heat), the air conditions (humidity, wetness), mechanical influences such as dust, vibration, vibration or impacts, and corrosive environmental effects such as salty lift (salt fog). As an environmental simulation laboratory, we simulate these environmental conditions in our climatic chambers and climatic chambers, creating real conditions to investigate the long-term behavior of the test specimens in reality. Environmental simulation and thermal shock testing laboratory for electronic assemblies and printed circuit boards We specialize in performing environmental simulation and temperature shock testing of electronic and mechanical assemblies. With over ten years of experience with the requirements of the automotive industry and medical

With the procedure ”Mark-on-the-fly”, deployed in the MOF-PROMO HP, all kind of closures, made of most diverse materials, can rapidly be decorated with high precision inside, outside and on the sides. Through the compact design, the user-friendly equipment allows a problem-free integration as inline-variant in existing production lines for closures of all kinds. The laser system is available, depending on the type of application, as MOF-PROMO HP or MOF-PROMO HP 200 Fiber Laser.

The CLICHE LASER Xi is equipped with state-of-the-art laser technology. Perfectly matched to the needs of pad printing, the direct imaging of high-resolution pad printing clichés takes place. The CLICHE LASER Xi has a cliché support table on which the clichés are fixed using T-slots. This allows an absolute positioning accuracy of the print image on the cliché. Due to the flat bed construction and the compact design of the machine, the set-up times in the laser system are massively reduced. In addition, the laser is low-vibration and this enables high engraving precision. A check of the diode power before imaging and, if necessary, calibration of the laser ensures a constant imaging quality. With the CLICHE LASER Xi not only all TAMPOPRINT INTAGLIO laser clichés can be produced at low cost, but also cliché formats of other manufacturers.

TAMPOPRINT offers you this cliché production station (bench top unit) at a top price-performance ratio. By updating this model the laser beam source was improved and the import functions were extended. The production of a laser engraved Aloxid-special cliché with the CLICHE LASER PLUS is the most economic laser engraved cliché production on the market and clearly superior to the laser plotter systems with regard to precision and speed. Software: Predefined parameters for the different cliché types that were exclusively developed by TAMPOPRINT. Generation and handling of data that can be laser engraved. Software ALFALAS® Laser Suite pre-installed.

3DMicromac‘s microMARK™ MCL is a compact and maintenance free DPSS laser system to meet customer’s demand for high quality laser engraving with significantly decreased cost of ownership. The system is utilized for visible, invisible as well as for technical engravings of all kind of spectacle lenses as well as marking of hard and soft contact lenses. The use of a UV DPSS laser source achieves a high quality marking result comparable to excimer laser engravings. High quality laser engraving Accurate contrast adjustment Low investment and operating costs Maintenance free laser source Plug-and-play replacement of main components directly by the customer High quality engraving with accurate contrast adjustment on a variety of spectacle lenses and coatings

The production of ophthalmic lenses requires different marking processes, e.g. technical engraving and branding for spectacle lenses as well as UDI marking for contact lenses. 3DMicromac offers ophthalmic marking solutions for laser engraving of all types of ophthalmic lenses, e.g. prescription and sunglasses, or contact lenses. All systems use UV lasers for permanent marking and guarantee Highest engraving precision Accurate contrast adjustment Reliable process stability Maximum throughput Top availability Flexibility in system configuration and Simple retrofitting. 3DMicromac‘s customers can choose between premium quality excimer laser systems and high quality maintenance free DPSS laser systems. Both are suitable for the production of technical engravings and visible branding on blocked and unblocked lenses, as well as contact lenses. The microMARK™ MCF excimer laser system generates the engravings by cold laser ablation of 193 nm UV radiation.

Laser engraving makes it possible to engrave almost any desired design on a wide variety of materials. The engraving is extremely precise and durable. ACL-Laser WorkstationProfessionell ca. 500 x 350 mm

The laser marking and engraving systems of the EasyMark series are among the most compact laser marking systems on the market. Depending on the configuration of the system most metals and nonmetals can be processed. A manual component loading device and cameraassisted positioning are just some of the features of the system. Control is via Coherent's powerful Visual Laser Marker (VLM) marking software, which offers numerous interfaces, support functions, 3D engraving, and more.

This is the accessories used in valve.

Plastic signs can be produced in varied designs and colours and are characterised by high durability and elasticity. Self-adhesive plastic signs or plastic signs with small boring holes can be flexible fitted anywhere. The inscription is made with laser or engraving technology. Contact I have read and agree to the privacy policy. *Pflichtfelder

Use our online inquiry form to place your request through our website at any time without any additional effort. Simply upload your manufacturing data to our server and deposit the material you require.

Pacifier Chain Accessories & Baby Articles Only the best quality for your child! We stock a large assortment of standard items such as as clips, round and shaped beads, milling and turning parts, rings, half rings, letter cubes and much more. Just ask for our price list. Even custom-made parts (including individual printing or individual embossing / laser engraving) according to your wishes and specifications are possible at any time!

Good formability and conductivity make our products useful for condenser case products produced via drawing processes. Manufacturers of these aluminum case applications rely on Novelis to provide high-quality aluminum coils or sheet in alloys such as 1050 and 3004. Novelis produces pre-painted aluminum for scales, dials and nameplates in laser engraving quality, in the form of a surface-treated coil or sheet. Specialized coatings are applied by rollers. Printing is possible via standard commercial inks and paints with no special materials required.

The industrial card laser engraver PowerPerso DLE provides highest laser engraving quality to produce cards that meet the requirements of demanding applications such as National IDs, driver’s licenses, vehicle registration cards, and secure electronic company ID cards. The device is easy and safe to operate and maintain, and can be used in both office and production environment. The PowerPerso DLE uses latest technology to engrave permanent and unalterable data into cards that demand the highest level of security. Encoding options such as contact, contactless or dual interface are available. The optional available security features such as CLI or MLI, making credential forgery and manipulation virtually impossible. The field-proven software packages Data Mastery (DMS) and Job creator make integration very easy for customers. Software development kits and Hardware Security Module (HSM) integration with open interfaces to customer’s application make the PowerPerso DLE to an i deal...

When it comes to laser marking, the following types of marking are essentially differentiated: • temper colour: in the case of stainless steels and titanium, oxygen storage in the surface, • white engraving, • deep engraving, • Color removal e.g. of anodized layers for aluminum, • Color change of plastics (usually additives required in the plastic), • foaming of plastics, • ... The advantages of laser marking are on the one hand: • longevity, • Biocompatible for and in medical technology. In addition, laser inscription is: • individually designed, • space-saving thanks to data matrix code, • consecutive numbering can be generated (serial number, date of manufacture, ...), • cheap, as e.g. there are no mask costs compared to pad printing.

The Pearl ID is a fast and modular personalisation system for all kind of personalisation tasks with unrivalled productivity. Superior quality, proven technologies and robust software allow you to meet even the most demanding production environments. Provides all the features and security you require for centralised card personalisation, including laser engraving, industrial inkjet printing, overlay lamination, and chip encoding. PowerPerso DLE - Decentralised Card Personalisation With the PowerPerso DLE you get a compact device for decentralized personalisation of ID documents. The high-quality laser engraving technology combined with a contact, contactless or Dual Interface encryption method for personal data offers you maximum security for highly secure ID documents. Pearl ID - Centralised Card Personalisation Pearl ID - Centralised Card Personalisation The Pearl ID is a fast and modular personalisation system for all kind of personalisation tasks with unrivalled...

Fixtures Engraved plates in various material Material Plastic, Aluminium, Stainless steel Colors Plastic White text: black, brown, red, orange, yellow, green, blue or grey. Black text: white, red, orange, yellow, silver, grey and light blue Print Laser engraved Text Arial or Times New Roman Attachment Tape or screw

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label!

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label! Sustainable and animal-friendly: FloraPap is the new trend product for the DIY sector. We now offer our tried and tested material in four versions and under an international brand name. This modern, vegan material is made from recycled paper and latex. After a few washes, it takes on a leather-like structure with an attractive vintage look. With a thickness of 0.55mm the material can easily be sewn or attached, by hand or machine, to all of your handmade products.

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label! Our metal labels and hangtags are made of stainless steel, brass or bronze. All materials can be very widely used due to its durability, e.g. for individual name tags inside and outside or key chains. Homemade accessories or clothing are finished with metal labels. Like all our Corinera labels, you can simply add our motifs and fonts to our metal labels, or upload your own logo and/or your custom shape.

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label! The leather for our Corinera labels is an unadulterated natural product "Made in Germany". It is obtained only from young German steers and is tanned using plants and minerals. It is approximately 1.2mm in thickness and suitable for high-quality finishing of products that do not need to be washed, e.g. bags, or key ring tags.

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. You can choose from our shapes or upload any(!) desired shape as a file. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Choose from our two different wood variants Poplar wood and Beech wood. Our 3mm thick, poplar wood is free of hazardous substances and ideal for use with products that do not need to be washed. Labels made from this material are, thanks to the minor production-related burn details, high of quality yet with a rustic element. Our beech labels and hangtags are made of beech wood in 2mm thickness. The five-fold layering makes the labels and tags dimensionally stable. Due to its durability they are suitable for many purposes, especially indoors and for products that do not need to be washed.

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label! Our 3mm thick, poplar wood is free of hazardous substances and ideal for use with products that do not need to be washed. Labels made from this material are, thanks to the minor production-related burn details, high of quality yet with a rustic element. Perfect for very special handmade products or for clever tags on gifts.

We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label! The vegan alternative to real leather: high-quality artificial leather, as used for our Corinera labels. This is made from 100% polyurethane and is guaranteed free from hazardous substances. With a thickness of approximately 1mm and a very authentic surface structure it looks very similar to real leather. It is also washable and durable and therefore good for finishing garments.

Applications: - Excimer Laser-Lift-Off using line-beam systems - Laser drilling and ablation using scanner systems or mask projection - Laser engraving of optical materials - Materials: polymers, polymer compounds, glass materials

With Corinera labels, we offer you something that no-one else can: unique, laser-engraved labels made from leather, artificial leather, wood, FloraPap or metal. We will burn your design with computer-controlled precision into labels or hangtags made from exclusive materials with a unique recognition value. Almost everything is possible. You can choose from our shapes or upload any(!) desired shape as a file. The contours of your labels are cut with the laser, the images are engraved with the laser. Mounting holes are directly lasered; hole size for labels 1.5mm, for hangtags 3.5mm. Think outside the box and give your product an unusual eye-catching label!

Self-adhesive aluminum sign in anodized quality printed in two colors Screen printing foil sign with transparent open areas for digital displays or similar Nameplate made of stainless steel (V2A), etched and colored black Self-adhesive PVC film for trams printed in digital printing Do you have special wishes? No problem for us! We create your signs according to your wishes.