Results for
KENDRION KUHNKE AUTOMATION GMBH
Germany
The Kuhnke FIO Controller 116 CNC is a PLC based on i.MX6 with integrated CODESYS PLC. In addition to the POUs made available in CODESYS SoftMotion, CODESYS SoftMotion CNC contains POUs for CNC functionality, different kinematic transformations with the appropriate visualization templates and the robotics axis group editor. It is able to exchange data with other systems via industrial Ethernet and RS232. In addition, a built-in SD-card slot and a USB-interface allow local storage of process data. An interrupt input allows realizing fastest possible reactions on specific process events.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Kendrion offers for its CODESYS-based controllers a library with blocks for motion control functions according to PLCopen for various drive controllers. The Kuhnke Motion Control library provides a wide range of function blocks for parameterization, positioning and diagnostics of the drive. The blocks are simple and intuitive to use and support in all phases of the workflow e.g. during programming, commissioning, diagnostics and maintenance. The motion task in the control system can thus be programmed simply, quickly and thus economically. A drive with only a few lines of code is put into operation via the corresponding visualization templates. The library supports drive controllers from various well-known companies and supplies a wide range of standardized functions. The communication between the drives and the control can take place via various fieldbuses such as EtherCAT®, CAN, Modbus or RS-485. Features
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
CODESYS Control Runtime is the leading manufacturer-independent programming system according to IEC 61131-3. Programmable Logic Controllers (PLCs), ECUs / mobile controllers, visualization devices, motion controllers and additional automation devices in various industries are programmed with this automation software. The CODESYS runtime is implemented on the control platforms of Kendrion Kuhnke and can therefore be used immediately for the machine builder. Continuously improvements are being made to the programming system and enable users to continue to innovate in the future.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
CODESYS Starterkit Control & Visualization Control, communication and visualization in one device The starter kit is fully wired and ready for use within minutes. In our download area, you can easily download a set of detailed examples explaining how to write your program, set up the visualization and load it onto to the control unit.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
CODESYS Starterkit HMI Extension Easy visualization. Each Kuhnke CODESYS Starterkit can easily be extended by a CODESYS HMI Touch display. Only connect the display to the Starterkit via an Ethernet cable, connect in with power supply and download a project on the HMI device. The programming, the connection of the program with the PLC as well as the steps to create an own visualization are explained in detail by several examples that can be downloaded comfortably in our download area.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
CODESYS Starterkit Control & Motion Easy positioning. The starter kit is fully wired and ready for use within minutes. In our download area, you can easily download a set of detailed examples explaining how to write your program and how to load it onto the control unit.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Vico MT series comprises powerful display units with multi-touch technology in an industrial-grade unit design.The installed CODESYS PLC software package makes it possible to use control functions in addition to visualization. The visualization is developed together with the PLC application in the free CODESYS Development System.The device communicates with the external fieldbus components via EtherCAT and Modbus.The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term available.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as an HMI and control unit.The simple CODESYS V3 programming ensures an efficient engineering. Furthermore, Scout has optionally 4 digital inputs and outputs. The embedded system is based on a scalable single or multicore i.MX6 processor technology combined with a 7” to 15.6” TFT touch display. All components are robust and long-term available. Whether standard or customized the all in one solution is the better alternative in many devices and compact machines. The Scout series can be equipped with different software packages, please contact us for an individual offer.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Kuhnke Vico 04 series is a powerful display unit with an industrial design and enables modern operating concepts. The installed CODESYS PLC software package offers the possibility to use control functions in addition to visualisation. The visualisation is developed together with the PLC application in the free CODESYS Development System. The device communicates with the external fieldbus components via EtherCAT, OPC UA and Modbus. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Kuhnke Vico 04 series is a powerful display unit with an industrial design and enables modern operating concepts. The installed CODESYS PLC software package offers the possibility to use control functions in addition to visualisation. The visualisation is developed together with the PLC application in the free CODESYS Development System. The device communicates with the external fieldbus components via EtherCAT, OPC UA and Modbus. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed CODESYS HMI software package offers the possibility to visualise data from one or more CDESYS controllers on a remote Kuhnke Vico 04. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and have long-term availability.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The Kuhnke Vico 04 series is a powerful indicator with an industrial design for the realisation of modern operating concepts. The installed software package CODESYS HMI makes it possible to visualize data from one or several CDESYS controllers on a remote Kuhnke Vico 04. The visualization is developed either independently or together with the PLC application in the free CODESYS Development System. The Kuhnke Vico 04 series is based on a powerful ARM Cortex-A8 processor combined with a resistive touch display. All components are robust and long-term available.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software package makes it possible to visualise data from any CODESYS controller(s) on the remote Vico MT. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term availability.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software package makes it possible to visualise data from any CODESYS controller(s) on the remote Vico MT. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term availability.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Kuhnkes FIO Safety SDI4/SDO2 is a safety I/O terminal featuring four safe digital input channels and two safe digital output channels. This expansion module from Kuhnke's FIO range easily integrates in any EtherCAT® network. Four inputs pick up sensor readings via floating 24 VDC contacts while two outputs send up to 2 A of current per channel to 24 VDC actuators. In case the EtherCAT terminal detects a fault it changes to a safe state (fail safe). The module meets the requirements of IEC 61508 SIL3 and DIN EN ISO 13849 PL e.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KENDRION KUHNKE AUTOMATION GMBH
Germany
Kuhnkes FIO Safety PLC is a module intended to expand EtherCAT networks. Acting as the FSoE master, it is able to address any FSoE slave including safety I/Os, motion controllers valve islands and other FSoE equipment. The Safety PLC meets the requirements of IEC 61508 SIL3 and DIN EN ISO 13849 PLe. CODESYS version 3.5SP8 or higher is used for programming. The CODESYS safety function modules have been certified previously thus considerably reducing the efforts of developing, verifying and approving a safety application. The main controller's CODESYS environment and the EtherCAT link are used for programming.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The fanless PLC with iMX6 processor technology combines compactness with longevity and performance. The device has an integrated flash disk and an easily accessible SD card slot. USB interfaces allow the use of additional change-over memories or external peripherals. Kuhnke controllers with CODESYS SoftMotion CNC+Robotocs provide the user with extensive project planning options for his motion tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The fanless PLC with iMX6 Quad Core processor technology combines compactness with longevity and performance. The device has an integrated flash disk and an easily accessible SD card slot. USB interfaces allow the use of additional change-over memories or external peripherals. Kuhnke controllers with CODESYS SoftMotion CNC+Robotocs provide the user with extensive project planning options for his motion tasks. Among other things, certified motion modules according to PLCopen and the full scope of the IEC 61131-3 programming interface are available, as well as integrated motion planning with coordinate values for robot positions in different coordinate systems and numerous supported kinematics with convenient configuration, e.g. various gantry robots (2/3/5 axes), bipod/tripod robots, Scara robots.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The Kuhnke CIO compact I / O connects various input and output signals in a compact housing in Book size format. The process data of the PLC are made available via the CANopen interface according to the device profile CiA 401. The robust design makes it suitable for use in machine and apparatus engineering.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The Kuhnke CIO compact I / O connects various input and output signals in a compact housing for the DIN rail. The process data are made available via the CANopen interface according to the device profile CiA 401 of the higher-level control system. The robust design makes it suitable for use in machine and apparatus construction.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
ODESYS Starterkit Control & OPC UA Easy programming. The starter kit is fully wired and ready for use within minutes. In our download area, you can easily download a set of detailed examples explaining how to write your program and how to load it onto the control unit. ; "Ready to use" ; Easy to integrate into a machine / plant ; Individually expandable and scalable ; Universally applicable thanks to standardised hardware and software interfaces
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher-level controller e.g. a PLC. ; PROFINET Fieldbus interface; Independent control of up to 7 induction generators; System monitoring, temperature control; Integrated I/Os and CAN system bus
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Kendrion Kuhnke Automation relies on CODESYS as a software platform for a wide variety of applications in the automation industry. For all Kuhnke platforms, this software is available as release CODESYS V3. The IEC 61131-3 programming system offers IEC 61131-3 editors (FBD, LD, IL, ST, SFC), comprehensive debugging and online functions to optimise the application code, as well as fieldbus configurators and editors to generate visualisations. Single and multi-axis motion control all the way to the writing of curves can be projected within the well-known IEC 61131-3 development platform together with all related logic applications. Summing it up it can be said that the tool offers the user an integrated solution to support him in his everyday work and is tailored to offer real-life support to accomplish his tasks. ; EC 61131-3 programming tool for industrial control and automation technology; Integrated visualisation editor; Numerous security features (source code, communication, ...)
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Remote maintenance and troubleshooting over long distances are only possible with a secure remote connection over the Internet. The central component of the Kuhnke remote service system is the IXplatform of our system partner IXON in Overloon, The Netherlands. The IXplatform is a powerful Industrial Internet of Things platform (Industrial IoT) and connects the control in the machine secure with one of the world-wide distributed data servers. The application on the data servers is web-based and can be accessed with any browser from your PC, smartphone or tablet. The VPN connection provides a secure remote connection for monitoring, programming or troubleshooting on the machine control. The IXrouter is a combined Industrial VPN Router and IoT-Edge Gateway and connects your machine controller, HMI, robots and all other industrial devices in your machine.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
With an EtherCAT master and two additional CANopen interfaces the new CODESYS control Scout from Kendrion can be used as a HMI and control unit. The simple CODESYS V3 programming ensures an efficient engineering. Furthermore, Scout has optionally 4 digital inputs and outputs. The embedded system is based on a scalable single or multicore i.MX6 processor technology combined with a TFT touch display. All components are robust and long-term available. Whether standard or customized the all in one solution is the better alternative in many devices and compact machines. ; The Scout series can be equipped with different software packages, please contact us for an individual offer. ; Industry standard interfaces ; Front with seamless film cover ; CODESYS V3, real-time clock
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The new Vico MT series is a powerful display unit with multi-touch technology in an industrial-grade unit design. The installed CODESYS HMI software package makes it possible to visualise data from any CODESYS controller(s) on the remote Vico MT. The visualisation is developed either independently or together with the PLC application in the free CODESYS Development System. The devices with brilliant IPS display have a robust glass touch screen with an aluminium bezel and are prepared for easy installation in the control cabinet. All components are robust and have long-term availability. ; High quality industrial design; IPS widescreen display with multi-touch glass touch; Visualisation with the CODESYS Development System; High performance and long-term availability
Request for a quoteResults for
Controller - Import exportNumber of results
46 ProductsCountries
Company type