Ingot - Import export

QuellTech Solution: The performance of a manual inspection cannot be compared with the speed and the repeatability of a contactless QuellTech Q4-1000 laser scanner. It is even possible to install several instruments in parallel to cover the whole width of the ingot with one single scan. These instruments are mounted on an existing portal and correctly synchronized, so that interaction of the laser light originating from the other scanners is excluded. The QuellTech laser line scanners produce 3D point cloud of the raw ingot surface, and the software calculates the coordinates of the highest and deepest levels of this surface. After scalping the flat surface can be scanned again for any defects. Benefits for the Client: Thanks to QuellTech’s wide area laser line scanners, the cycle times for ingot scalping could considerably be reduced, and excessive material scrap due to a too low scalping level is prevented.

Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).

At TRADIUM, antimony is available in the following shapes and purities for industrial supplies: - Antimony granules, antimony ingots - With purities for ingots 99.65%, granules 99.99% – 99.995% Your point of contact for antimony is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, tellurium metal is available in the following shapes for industrial supplies: - Tellurium powder - Tellurium ingots - In purities from 99.5% to 99.995% Your point of contact for tellurium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

To produce industrial aluminum of this caliber, Novelis begins by carefully controlling the composition of the alloy, then taking exceptional care in the casting procedure to avoid non-metallic impurities. The surfaces of the aluminum ingots are then sawed and scalped to remove any new impurities before rolling. These ingots are preheated for long periods for optimal homogenization of the metal structure, then hot- and cold-rolling procedures achieve high surface quality. “Bright rolling” delivers the highest possible surface consistency and reflectivity. The result is an aluminum surface reflective enough to be used as a mirror.

At TRADIUM, tin is available in the following purities and shapes for industrial supplies: Deliverable forms - Tin ingots, granules, and powder - With purity 99.99% – 99.999% - Tin compounds on request Your point of contact for chromium is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, germanium is available in the following forms for industrial use: - Germanium metal as granules and ingots - Germanium oxide Your point of contact for germanium is: Matthias Rüth Phone: +49 (0)69 50 50 250 - 250 We are looking forward to hearing from you!

At TRADIUM, dysprosium is available in the following form und for industrial supplies: - Dysprosium oxide - Dsyprosium metal, powder, ingots Your point of contact for dysprosium is: Jan Giese Phone: +49 (0)69 50 50 250 - 237 We are looking forward to hearing from you!

At TRADIUM, bismuth metal is available in the following shapes for industrial supplies: - Bismuth granules, ingots, metal needles - Bismuth powder - Bismuth oxide Your point of contact for bismuth is: Frank Meier Phone: +49 (0)69 50 50 250 - 234 We are looking forward to hearing from you!

At TRADIUM, indium is available in the following forms for industrial use: - Indium metal - Indium nitrate - Indium oxide - Sheets, rods, granules as well as ingots with different weights TRADIUM is a registered REACH distributor (Registration, Evaluation, Authorisation and Restriction of Chemicals) for indium and therefore meets the highest requirements in terms of transparency and information transfer along the supply chain. Your point of contact for indium is: Matthias Rüth Phone: +49 (0)69 50 50 250 - 250 We are looking forward to hearing from you!

At TRADIUM, platinum is available in the following forms for industrial use: - Platinum sponge, ingots, and sheets - Platinum in various organic and inorganic compounds - Platinum semi-finished products Your point of contact for platinum from TRADIUM is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!

At TRADIUM, palladium is available in the following forms for industrial use: - Palladium sponge - Palladium in various inorganic and organic compounds - Palladium ingots, sheets, and semi-finished products Your point of contact for palladium from TRADIUM is: Philipp Goetzl-Mamba Phone: +49 (0)69 50 50 250 - 236 We are looking forward to hearing from you!

The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.

SiBrickScan (SBS) is a dedicated at-line system for the FTIR quantification of interstitial Oxygen in complete Silicon ingots, resulting in a concentration profile along the longitudinal axis. Accessing this information without sawing wafers or test samples is a major and cost saving advantage. Get Valuable Information to Check and Optimize Product Quality Knowing the Oxygen gradient of Si ingots enables important conclusions helping e.g. to control and optimize the Silicon crystallization process or to identify batches of bad raw material. Therefore SBS will help to save costs by optimizing product quality and reducing the amount of defective wafers. The random sampling of individual ingots does strongly reduce sample preparation efforts and provides relevant information much earlier.

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ALUMINUM INGOT 1,Aluminum ingot manufacture. 2,high standard. 3,High quality. 4,Competitive price Brands : Al99.85,Al99.80,Al99.70 Products Name:Pure Aluminum Ingot 99.9% Chemical Composition: al Weight: 20/25kg Al (Min): 99%-99.9% Place of Origin: Germany Appearance: silvery white

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZINC INGOT Usage: Mainly used for die-casting alloy battery industry Pharmaceutical / rubber industry Chemical industries zinc and other metal alloy plating coating industry in applied widely. Factory with strong supply ability silver white lustrous metal zinc ingot for die-casting alloy battery industry 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. Used for industry such as automobile,pinning and weaving,electron broadly and so on

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== ZAMAK INGOT Zamak alloys were developed for the first time in the United States in 1929. The word Zamak comes from the German acronym and represents the elements it is made of: Z for Zink, zinc, A for Aluminum, aluminum, MA for Magnesium, magnesium, and K for Kupfer, copper. At its very beginning, Zamak was used just for decorative applications; later, the strength of this material determined its success in many other productions.

Email : trasmme@gmail.com SKYPE : TRAS MM ============================== MAGNESIUM INGOT The proportion of magnesium alloy is the lightest among all structural alloys, so the weight of aluminum or iron can be reduced without reducing the strength of the parts. Smelting from minerals into metals is mostly made up of raw embryos of various sizes and shapes. Magnesium Alloy Casting Ingots can be used to make all kinds of plates, wires and profiles, as well as for use in chemical industrial, military industrial and meter instrument manufacture, etc. In the elastic range, the magnesium alloy by the impact load, the absorption of energy than aluminum alloy, so the magnesium alloy has a good seismic noise reduction performance.

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details

We export scrap since 1988 all over the world. Our company tries to respond in the best way to its commitments to delivery time, quality and quantity of materials. The materials which are received, processed and shipped to facilities in Germany, in order to be exported, are Aluminium , Copper , iron , compressor scrap. These materials are collected from junkyards which are located in Europe, factories producing various products (scrap, wastage), constructing companies, shipyards, public organization and there are also been imported from neighboring countries. The materials, after being processed and separately being stored, are propelled to steel industry, factories in Europe and Asia. Do get back to us for more information and details