Industrial-equipment-installation - Import export

InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.

InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Aramid fibers are suitable for very demanding applications and they are widely used in the firefighting industry (manufacturing of firefighters’ clothing) because of their flame retardant properties. Aramid is not only fireproof, the aramid fibers also have a high tensile strength, which is why they are often used for bulletproof vests (military and police) or for armoring selected emergency vehicles. A special property of aramid nonwovens is its good thermal insulation. The laid heating wire creates a very high heat output, which is insulated by the nonwoven. Aramid has a high heat resistance, which is an enormous advantage since laying the heating wire generates a very high heat output which is further enhanced by the insulation provided by the aramid nonwoven carrier. In addition, the nonwoven is either not combustible or flame retardant and can be used for a temperature ranges of up to 200°C.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch. After the technical embroidery process, the safety switch is inserted and connected by our company’s respective department. Each prefabricated element is tested for functionality and performance in the final inspection and is delivered to the customer after passing the test. As a semi-finished product, the infrared heating element on glass mesh fabric can be further processed by the customer, e.g. in connection with silicone, rubber or epoxy resin.

BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.

We manufacture customized heating mats based on carbon filaments & roving in all sizes and for all voltages!

BORSIG patented steam superheaters are suitable for steam pressures of up to 160 bar (16,000 kPa). The steam superheaters are arranged direct in line after the waste heat boilers which are connected to the secondary reformer or reformer – depending on the process. The steam superheater can be provided as two stage or one stage, horizontally or vertically arranged. The final design arrangement is determined by the process requirements. We have delivered steam superheaters for superheating saturated steam at a pressure stage of 12,500 kPa from 328 °C to 531 °C by cooling down process gas from 723 °C to 355 °C.

BORSIG manufactures reformed gas waste heat boilers for more than 50 years. We supply reformed gas waste heat boilers for gas inlet temperatures of up to 1,200°C and steam pressures of up to 160 bar (16,000 kPa) for petrochemical industry (ammonia plants, methanol plants, hydrogen plants, ethylene plants, styrene plants, MTBE plants, oxo-alcohol plants, direct reduction iron plants, coas gasification plants, gas to liquid plants, and others. Every reformed gas waste heat boiler is designed and manufactured exactly in accordance with the customer´s individual requirements. BORSIG offers two different designs: 1. Reformed gas waste heat boilers with BORSIG´s thin stiffened tube sheet design 2. Reformed gas waste heat boilers with thin flexible tube sheet design.

The LevelEx is available in sizes M16 to M63 or with NPT threads from 3/8" to 2 1/2". PFLITSCH manufactures the cable gland bodies from bright brass, galvanised nickel-plated brass and corrosion-free stainless steel. The LevelEx achieves protection class IP 66 or IP 68 and corresponds to the ignition protection types flameproof enclosure "Ex-d" and increased safety "Ex-e". With its wide temperature range of -60 °C to +130 °C and approvals according to ATEX and IECEx, the LevelEx can also be used under extreme environmental conditions. For armoured cables, PFLITSCH offers the LevelEX AC. It has the same technical quality as the proven LevelEx for non-armoured cables. In addition, it convinces with additional properties. For example, it scores with an innovative design for accommodating armoured cables: Two opposing windows in the armour clamping allow the correct seating of the cable armour to be checked immediately.

Application as breather/venting safety device incorporating an explosion proof flame arrester element for installation on top of storage tanks, tank access covers or breather pipes. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe. This device is not permitted to be installed in enclosed areas. Approved for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a maximum operating temperature of 60 °C .

For installation into pipes to protect containers and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Working unidirectional in pipes, whereby an operating pressure of 1.2 bar abs. and an maximum operating temperature of 60 °C must not be exceeded. Provided with one temperature sensor (PT 100) the armature is certified against short time burning from one side. The installation is not dependent on the position and both directions of flow are possible. During installation, please observe the direction of detonation and the indication „protected side“.

For installation into pipes to the protection of vessels and components against stable detonation of flammable liquids and gases. Tested and approved as detonation flame arrester type 4. Approved for all substances of explosion groups IIA1 to IIA with a maximum experimental safe gap (MESG) > 0.9 mm. Bi-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. All sizes are tested against “stabilized burning” and withstand this up to a max. burn time BT ≤ 30.0 min. To detect a “stabilized burning” a temperature sensor must be installed at each endangered side. Mounting is acceptable in any position, in horizontal as well as in vertical pipes.

TIP – Well-tempered air The solution for the optimum, centrally controlled heating and ventilation of buildings of all kinds. With a housing made of sendzimir galvanised sheet steel with threaded rods fitted as standard, TIP unit heaters are ideal for wall-mounting as well as ceiling-mounting. Functional principle Air is drawn in through the sheet metal sickle-blade silently-operating fan and is blown through the copper/aluminium heat exchanger into the room. The models with large heat exchange depth are ideal for use with low temperature operation. Benefits —Sickle-blade, whisper-quiet fan with optimised full nozzle —Easy to install —Unbeatable in terms of value for money Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and we will be relying systematically on EC technology to power and control our units. Reasons: — No wasted power — Minimum noise levels — ErP-compliant future

!!!Not suitable for drying animal or vegetable products!!! VIBRATION DRYINGThe G-series dryer gently circulates your workpieces by means of vibration, together with the drying medium. The heated drying medium absorbs the moisture from your workpieces. In addition to drying your workpieces, the relative movement between them and the medium also has a polishing effect. PROTECTING YOUR SENSITIVE PARTS The bowl channel pitch is helically shaped and has no ramp, making the G dryer especially gentle when handling your workpieces. The high heating power is fully adjustable. The heater with replaceable heating elements is assembled separately from the vibrating section. To ensure your working environment is protected from dust, the dryer can also be fitted with a dust extractor.

CONTACTLESS DRYING BY MEANS OF HOT AIRThe BF-HL belt dryer allows you to dry your workpieces using hot air. This procedure is particularly beneficial when your workpieces have the following characteristics: Sensitive parts that must not come into contact with each other Parts with tight boreholes Long and bulky parts EFFICIENT DRYING IN THE TUNNEL Your workpieces are transported through a heated drying tunnel on a fine wire mesh belt, which is also available in premium V4A stainless steel. The temperature and speed of the conveyor belt are both fully adjustable. Special equipment includes a high-pressure air knife, which blows the residual water out of the workpieces prior to drying, as well as an extension of the conveyor belt to make placing and removing the workpieces easier.

TOP C - for the first rays of summer — bring cool air into your warehouse on hot days with the TOP C — offer cooling as an option, even when your client only asks for hall heating — up to now a project-specific solution – the all-rounder now becomes a standard product Multifunctional The demand for cooling buildings is also continuing to increase in industrial climate control. In the system with chiller/heat pumps, the TOP C offers a simple solution for both: removing heating or cooling loads. Continuously variable control Control of TOP C is continuously variable with the cost-effective EC fans to supply the precise output actually required. This also means unnecessary sound emissions are avoided. Fast-reacting The most flexible climate control solution for storage, production, and sales. The fan support ensures fast-reacting heating and cooling of the hall.

Ultra – For greater energy efficiency The Ultra EC is now equipped with the most energy-efficient drive concept, through the use of EC technology, and can now be used wherever energy needs to be saved over the long term. How it works Air is drawn in through the axial fan and is blown through the circular heat exchanger into the room. The heated or cooled air is guided into the room on-demand through the pre(settable) louvre slats. Benefits —high-performance, energy-saving —suitable for low water temperatures —hygiene-certified to VDI 6022 Applications Buildings of all kinds, which need to be ideally heated and ventilated with centralised or decentralised control. Kampmann is completely modernising its unit heaters. We are responsibly taking a courageous step forwards and, from now on, will be relying systematically on EC technology to power and control our units. The reasons: — No wasted power — Minimum noise levels — ErP-compliant future

SANHA stainless steel heating circuit distributors are suitable for all hot water heating systems in accordance with EN 12828, and for panel heating / cooling systems in accordance with EN 1264, and can therefore be used not only in residential buildings, but also in industrial, commercial and public buildings.

Offering international, multidisciplinary team for efficient project purchasing and special procurements in Germany / the DACH region The importance of a strong procurement department is critical to successfully completing projects. DEDE Industrieausstattung recognises that adding international engineers to the team is key to successful procurement of materials and services. The team not only has broad, international expertise, but also a deep understanding of industry requirements. The engineers are not only able to minimise risks, but also proactively take measures to mitigate them. This helps to complete projects on time and on budget. DEDE Industrial Equipment also specializes in sourcing specialist products and solutions and can identify qualified niche manufacturers. Customers can benefit from this expansion and rely on the expertise and commitment of the multidisciplinary team. Clients can rely on us to meet their quality, schedule and budget requirements.

The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.

• Light emitting seals (Flat seal with integrated circuit, LED and transient voltage suppression); • Light emitting sockets (LED, with integrated seal and screw, transient voltage protection); These light-emitting Staiger seals and sockets are above all suited for assuring operational readiness of new and existing installations The light-emitting seals and sockets immediately signalize malfunctions and their precise location. This is particularly advantageous in valve cascades or similar systems with high packing density. Your system’s operational readiness is considerably improved by using the electronic components fitted with LEDs. This is an effective measure to consistently reduce required maintenance costs and time. Owing to their low height and standardized connections, the light-emitting seals and sockets may also be installed in retrofitting.