Results for
TECHNO-COMPOSITES DOMINE GMBH
Germany
External casing components for urban buses and longdistance coaches For many years, we have been developing casing components for the exterior of buses and railway vehicles here at TC. One advantage of GRP profiles is that we can produce different component lengths based on just one tool. This increases flexibility in design. The components are based on a profile made of glass fibrereinforced plastic, which we process in our CNCcontrolled milling machines to produce precisioncut parts for e.g. wheel arches, indicators and maintenance covers. We can also install reinforcements or addon parts at the same time if required.
Request for a quoteFORBO SIEGLING GMBH
Germany
The Siegling Blizzard HC is a new benchmark in quality and speed when heating splices for Siegling Extremultus belts in the aramide and polyester lines as well as narrow Siegling Transilon belts. It’s easy to handle and has very short cycles. Automatic heating and cooling in one single tool prevents mistakes made during handling saves having to put the belts and splicing guide into a cooling clamp after heating is highly efficient due to short cycles delivers excellent splicing results with superior repeat accuracy
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
This AWALIFT is also available in an extended design, the AWALIFT 7/3x2, which achieves a discharge head of 92 mWS, while the AWALIFT 7/3 achieves a discharge head of 46 mWS. We offer everything from a single source, from planning to installation. STRATE project engineers are experienced in turning your specialized requirements, such as conveying wastewater over large distances and high discharge heads, into first-class process solutions. Our patented separator system makes it possible to connect two circulating pumps in series.Tank: S235JR (St37-2) Draining towns with up to about 16,300 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type
Request for a quoteSTRATE TECHNOLOGIE FÜR ABWASSER GMBH
Germany
With a system power of 250 m³/h, the AWALIFT 6/3 achieves a discharge head of 48 mWS. The AWALIFT 6/3x2 version allows for a discharge height of 96 mWS. The fully automated, floodable STRATE AWALIFT system fulfills the requirements of DIN 1986-100 and DIN EN 12056-4. Draining towns with up to about 11,600 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One holding tank with three separator systems Three centrifugal pumps and motors according to type and operating location required Six pump gate valves Three STRATE non-return valves One Y-pipe DN 200 Three pressure pipe gate valves DN 200 Level measurement LGA certified according to DIN EN 12050-1 /. -4
Request for a quoteFORBO SIEGLING GMBH
Germany
The Siegling Blizzard press is supplied with a flight case on castors. Because it’s so compact and lightweight, it’s quick and easy to set up. It’s ready to use as soon as you’ve plugged it into the mains because there’s no need to connect it to external subsystems. The control unit, compressor and air cooling system are integrated in the press. This saves time and costs, prevents errors during operation and ensures hygiene on site.
Request for a quoteEWOQE GMBH & CO. KG
Germany
Welcome to EWOQE, your expert in 3D construction, design, and modeling! Our passion lies in creating high-precision and innovative 3D solutions that propel your projects forward. Our experienced team of engineers and designers collaborates closely with you to bring your visions to life. From concept to final modeling, we offer expertise and creativity every step of the way. Thanks to cutting-edge technologies and a deep understanding of additive manufacturing techniques, we can realize even the most complex geometries and unique designs. Whether you need prototypes for new products, want to optimize existing models, or design complex components, we are your reliable partner for all your 3D challenges. Trust our expertise and let us transform your ideas into reality together. Contact us today to learn more about our services in 3D construction, design, and modeling.
Request for a quoteEWOQE GMBH & CO. KG
Germany
Discover EWOQE's comprehensive service offering in 3D printing for mechanical components and prototype construction! We provide a variety of advanced 3D printing techniques such as FDM, SLS, MJF, and SLA to meet your needs and produce high-precision components. Our experienced team assists in the development and manufacturing of prototypes as well as functional mechanical parts. Understanding the importance of quick iterations, we offer rapid turnaround times to shorten your development cycles and optimize your time-to-market. With our advanced 3D printing technologies, we can achieve complex geometries and fine details to ensure your components meet the highest quality standards. Whether you require prototypes for product development, individual pieces for specific applications, or series production, we have the solution for you. Depend on EWOQE as your trusted partner in 3D printing for mechanical components and prototype construction.
Request for a quoteAIS HENSCH AUTOMATION-INDUSTRY- SOLUTIONS INH. IGOR HENSCH
Germany
Industrial hydraulics are an essential part of numerous industrial applications and play a crucial role in controlling machines and systems. At AIS Hensch Automation-Industry-Solution, we offer a comprehensive selection of high-quality industrial hydraulic components and systems designed for reliability, efficiency and performance. Precise Control and Performance: Our industrial hydraulic solutions provide precise control and performance for various applications, be it manufacturing, mining, construction or other industrial areas. By using high-quality components and state-of-the-art technologies, we ensure reliable and efficient performance. Versatility and adaptability: Our range includes a wide range of industrial hydraulic components, including hydraulic cylinders, valves, pumps, motors, hoses and much more. These components are suitable for a wide variety of applications and can be flexibly adapted to the specific requirements of our customers.
Request for a quoteEWOQE GMBH & CO. KG
Germany
Welcome to EWOQE, your expert for prototype construction in precision mechanics! We offer a comprehensive range of services to meet your demanding requirements. Utilizing advanced 3D printing techniques such as FDM, SLS, MJF, and SLA, we deliver high-precision plastic components quickly and cost-efficiently. Our dedicated team is here to assist you with the design and manufacturing of prototypes, no matter their size or the quantity required. We understand the critical importance of quality and precision in precision mechanics and are committed to exceeding your expectations. Thanks to our additive manufacturing technologies, we can produce complex components with high accuracy, aiding you in efficiently achieving your development goals. Our express service also ensures fast turnaround times to optimize your time-to-market. Depend on EWOQE as your reliable partner for prototype construction in precision mechanics.
Request for a quoteMALEKI GMBH
Germany
Abrasion resistant sealant for industrial floors with high surface strength. Increases the chemical resistance of the substrate. Maleki-VS 930 is also used as a system product for unpolished Lithokor design floors. Packaging unit: 7 kg container (single), other packaging sizes on request – Article-No.: 1828
Request for a quoteMALEKI GMBH
Germany
Versatile silicate sealant for mineral wall and floor surfaces. Ideal for polished substrates. The material only forms very thin layers which does not affect the look and feel of high-quality mineral surfaces like Terrazzo floors. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 5 kg canister (300 kg / pallet), 30 kg canister (540 kg / pallet), 1000 kg IBC – Article-No.: 1811
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
polyDOOR is a weather-resistant enclosure made from glass-fibre reinforced polyester. Its special feature is the integrated hinges for opening the lid. This enclosure is also available with a transparent viewing panel. Ideal for all types of electrical and electronic internal mounting. Fastening domes for a wide range of internal mountings are already integrated into the enclosure. polyDOOR is available in a wide range of standard sizes. A large selection of different locking screws, cable glands and other accessories such as cross rails, supporting rails, terminals and mounting plates are also available.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
aluTWIN is a high-performance aluminium enclosure with two-chamber system for heavy duty operation. This enclosure offers the option of installing the electronics and operating unit in separate parts of the enclosure, or installing two electronic components separately from each other. The design is based on the aluNORM product range. It is weatherproof and watertight. Convenient fastening domes enable circuit boards, mounting plates and electronic components to be attached easily.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
polyTOP is a weather-resistant enclosure made from glass-fibre reinforced polyester. Thanks to the wide range of standard sizes, the enclosure is ideal for all types of electronic or electrical internal mountings. There are several fastening sockets in the bottom with M6 threaded bushing for the attachment of mounting plates or circuit boards. The lid screws of the enclosure are made of corrosion-resistant polyamide and are available in a number of different shapes. Supporting rails, terminals, cable glands and other accessories are also available.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
aluKOM is a watertight enclosure made from die-cast aluminium, which has gone on to become the global standard since its invention by Friedhelm Rose in the 1970s. Originally developed as a terminal enclosure, it is ideal for the attachment of all electronic and electrical components. The large number of sizes available caters to all requirements. aluKOM is also available with an EMC gasket. The internal fastening domes in the bottom enable internal mountings to be fastened easily. Compatible cable glands are also availabe in the ROLEC product range.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
conFORM is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a patented tooth system contour between the lid and bottom. It is ideal for industrial internal mounting that requires special EMC protection. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Accessories such as mounting plates and cable glands are included in the ROLEC product range.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
conTROL is an extremely robust EMC enclosure, which features EMC shielding without an expensive conductive gasket as standard. Continuous contact is created by means of a tooth system contour between the lid and bottom. It is ideal for every type of industrial internal mounting that requires special EMC protection. A lid with an extra-high collar edge and visually appealing bevelling is also available to protect buttons or switches on the front of the enclosure. The enclosure is water-tight and weather resistant. The interior contains fastening domes to accommodate mounting plates, supporting rails or circuit boards. Compatible cable glands are also availabe in the ROLEC product range.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ROLEC GEHÄUSE-SYSTEME GMBH
Germany
aluCLIC is a highly modern electronic enclosure, designed for quick installation and rapid exchange. The snap lock located under the enclosure can be easily levered open and the enclosure changed in an instant. The lid already has a recess to accommodate membrane keypads or a front plates. The snap-on device for attaching the enclosure can be fastened to the wall, ceiling or the body of the machine. Practical, fast and neat to install.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
handCASE is an extremely robust hand held enclosure made from die-cast aluminium. Thanks to its ergonomic design, the enclosure fits well in your hand. The special wall strength of the enclosure provides solid protection for internal mounting under the most extreme conditions. The heavy-duty enclosure has ingress protection of IP 66 and is available with or without a battery compartment. In the interior of the enclosure are fastening domes for the installation of circuit boards, mounting plates and other internal mounting. Cable glands and other accessories are also available.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
polyKOM is a standard enclosure made from weather-resistant polyester. It is suitable for every type of electronic or electrical internal mounting. Exterior hinges. Exterior supporting hinges and external fasteners are also available. Compatibility with available standard products is another advantage of polyKOM. There are already several threaded bushings in the bottom for the attachment of mounting plates, circuit boards or supporting rails. Compatible cable glands and other accessories are also available.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
QUADRO 50 gets its name from the square steel pipes of a diameter of 50 mm which form the profile basis of the system. Due to the particular properties of the spheroidal graphite parts, a higher than average bearing strength is achieved. The overall static equilibrium of the system is also extremely high due to its combination with steel profiles. QUADRO can be assembled quickly and easily at the point of use, thanks to its sophisticated technology. The articulated parts are equipped with a swivelling limitation. A control lamp adapter and a QUADRO 50/taraPLUS elbow for connection to the taraPLUS system complete the range. Compatible command enclosures include commandCASE, topVISION and multiVISION.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
QUADRO 80 gets its name from the square steel pipes of a diameter of 80 mm which form the profile basis of the system. Due to the particular properties of the spheroidal graphite parts, a higher than average bearing strength is achieved. The overall static equilibrium of the system is also very high due to its combination with steel profiles. QUADRO can be assembled quickly and easily at the point of use, thanks to its sophisticated technology. The articulated parts are equipped with a swivelling limitation. A control lamp adapter completes the extensive package. Compatible command enclosures include commandCASE, topVISION and multiVISION.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
taraPLUS was developed for light to medium loads. It is quick and easy to assemble on site and the large openings in the system parts allow cables to be easily fed through. The special design combines round and square profiles, thereby achieving high static equilibrium. taraPLUS is a tried and trusted system with ingress protection of IP 54.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
aluFACE is an extremely versatile and flexible command enclosure available in six different versions as die-cast aluminium with a frame made from extruded aluminium profiles. Ideal for all types of industrial operating and display technology. The interior contains pre-installed fastening domes for circuit boards, supporting rails or mounting plates. Matching suspension arm systems can be found in the relevant product category on the ROLEC website.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
profiPLUS 70 offers more room for further control lines than the smaller profiPLUS 50 system. At the same time, the system's bearing strength increases significantly. In addition to the many advantages of profiPLUS 50, such as couplings with pre-mounted support profiles, continuous equipotential bondings, integrated cable protectors, and much more, an additional reducer adapter for connecting to the profiPLUS 50 system offers the possibility of connecting to the panels of leading manufacturers such as Siemens, B&R, CRE Rösler and Beckhoff.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
aluDISPLAY is a display enclosure available in three widths, with a modern design and well-thought out product features. Ideal for electronic controls and operating units with flat modules. Assembly or removal of the enclosure is extremely quick thanks to snap-on covering profiles. An internal profile slot enables circuit boards to be easily inserted or for system components to be directly attached with spring nuts. The front plate is ideal for the attachment of membrane keypads or the attachment of touchpanels. The aluDISPLAY can be connected with the ROLEC suspension arm system, taraPLUS, using the compatible end cover.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
technoBOX is a modern, inexpensive and attractive enclosure for electronic or electrical internal mountings of all kinds. It is made of long-lasting ABS. The slanted lid edges give the house an unusual appearance. A recess in the lid enables front plates, films or membrane keypads to be easily accommodated. Fastening domes have already been fitted in the enclosure base and in the lid to accommodate internal mountings. Mounting plates, front plates, cable glands and other accessories are also available.
Request for a quoteROLEC GEHÄUSE-SYSTEME GMBH
Germany
mobilCASE is a mobile control enclosure, which is absolutely variable in length thanks to its profile construction. The three widths offer scope for every imaginable application. Robust end caps made from die cast aluminium protect the enclosure and internal mountings in mobile field applications. Shoulder straps make transport easier. A practical stand aids in its use on a tabletop. Two enclosures can also be combined together by means of an adapter. An articulated bracket allows it to be used as a wall or desk enclosure. Accumulator holder for 2 or 4 AA batteries provides mobile power supply. The recessed front surface is optimised to accommodate membrane keypads or displays. A versatile profile enclosure with a whole host of possibilities. Weatherproof and watertight. Numerous accessories complete the mobilCASE range.
Request for a quoteEXCOR KORROSIONSSCHUTZ-TECHNOLOGIEN UND -PRODUKTE GMBH
Germany
Using a special process, trays of different dimensions or materials (corrugated board, fibre casting, plastic) are equipped with a VCI film true to contour. The VCI protection becomes part of the tray and - combined with a closed outer packaging - makes further corrosion protection unnecessary. You can directly load the trays, minimize the need for packaging components and optimize handling at the workplace. Trays made of cast fibre or corrugated board are ideal for one-way use. After use, the film and tray can easily be separated, so that both materials can be sorted and disposed of.
Request for a quoteResults for
Component - Import exportNumber of results
34 ProductsCountries
Company type