Component - Import export

hydraulic cylinder component

At WIB, we produce all subcomponents, including inner and outer rings, brass and steel cages, as well as the shields to the highest quality standards. Our Performance Bearings are manufactured to ISO, ABMA, DIN, and BS international standards while our Custom Bearings are tailored specific for each application. The Performance Bearing nomenclature is described below.

Demag components for process cranes turn a crane into a fully fledged process crane, without the need for any additional design or development work. They're fast, safe and reliable, making these components extremely worthwhile elements of the Demag process crane engineering product line. The individual components – MPW open winch units, MPW open winch crabs and corner-bearing end carriages – are proven components that have been tried and tested for many years. They are individually configured to meet the specific requirements of your process crane. The variety of possible applications is virtually unlimited. See all the performance details and benefits on the product pages.

The combination of crane control and wireless control concept creates the link between an operator and a crane and thus makes optimum load handling a tangible experience. Absolutely safe operation of a crane or a system of several cranes must always be guaranteed – safety for the crane operator as well as for the transported goods and surrounding infrastructure. The smart Demag SafeControl system enables independent and continuous monitoring of a crane on the basis of a largely redundant control concept to bring the system to a standstill independently if any irregularities occur. Furthermore, dangerous conditions can be identified and prevented in advance. The crane operator can concentrate fully on his/her work at all times thanks to the safety control system. A crane can be conveniently and intuitively controlled by radio, which is also very efficient. The safety control system combined with radio control can ensure gentle handling and precise positioning of loads.

— For the cooling of blow-down water and the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Rigorous compliance with official requirements thanks to automatic operation — Fast and easy assembly, requires just a small number of connections before it can be used

— For increased system efficiency and reduced fuel consumption of up to 2% — Prewarming of the combustion air takes over a small portion of the thermal output of the burner — Lower investment costs in comparison with conventional solutions, low amortisation time — Lower maintenance and servicing costs

— Secure use of condensate in steam boiler systems — Decreases in energy and water consumption due to reduced quantities of make-up water — Minimisation of flash steam losses, desalting and blowdown quantities; reduced consumption of chemicals — Reduced corrosion potential in the steam condensate system when using high-pressure condensate systems

— For continuous feed water control — Increased efficiency of flue gas heat exchangers — Fewer pump circuits — Constant boiler water level — Minimum flow rate for cooling the feed pump is assured Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the reliable fuel supply with gas — Preassembled for fast installation — Rigorous compliance with official requirements — Increased operating reliability — Also for biogas- and hydrogen-fuelled systems Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For the recovery of heat from desalinated water/condensate — Increase in system efficiency of up to 2% — Reductions in fuel, cooling water and waste water costs — Fast and easy assembly, requires just a small number of connections before it can be used Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— For recovering heat from flash steam from thermal water treatment — Heat recovery and thus efficiency improvement — Energy produced can be used for additional heating or for transfer to a separate water circuit Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

— Save up to 1.8% in fuel costs through a higher level of waste heat utilisation — Easy retrofitting to older systems thanks to a small space requirement and simple piping — Matched control for safe operation of the boiler and components — Quick amortisation, even on systems with few operating hours — Ready for operation with just a few connections — Simple commissioning, operation and maintenance

The water analyzer measures residual oxygen concentration, pH values and conductivities of the boiler feed water and pH values of the boiler water. — For the fully-automatic measurement and monitoring of the boiler water quality — Increase in operating safety thanks to continuous monitoring of the water values — Automated monitoring with constant measurement of the pH value, oxygen content and conductivity — Savings on chemicals thanks to needs-based dosing of additives — Increased system efficiency through reduced desalting losses and saving of exhaust vapour energy — A water analysis device can monitor up to three boilers at a time and be integrated into plant control systems with control technology

— Fully automatic softening of the fresh water prevents the formation of limescale — Reliably soft feed water for preventing calcification of the boiler surfaces — Ensures efficient heat transfer, high efficiency and long service life of the boiler — High level of operational reliability and integration into the boiler control system — Needs-oriented automatic operation possible for unsupervised operation, even with fluctuating raw water hardness — Ideal in combination with the fully automatic water analysis device

— For the extraction of the feed water/condensate — Consumes less power, more convenient to operate — Speed-controlled version for increased flue gas heat exchanger efficiency — Redundant pump for maximum reliability of supply — Preassembled for fast installation Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

We manufacture numerous components for furniture. We use Nordic material, mostly Scandinavian origin, which is particularly suitable for making classic wooden furniture. We monitor the quality and humidity of the wood and adhere to the detailed drawings, quality and processing conditions. We do product development in cooperation with the customer.

EQ156 crystals provide 32.768kHz in an ultra-miniature package. The part is designed to provide the smallest possible component size for real-time clock applications. Their miniature size and rugged construction make them ideal for battery powered, hand-held equipment. Frequency 32.7680kHz Ultra-miniature package: 3.2 x 1.5 x 0.9mm Low mass, rugged construction Packaged in standard EIA tape and reel Miniaturized 32.768kHz crystal for real-time clock applications The part is ideal for battery powered, hand-held equipment

Independent Disc Harrow with rubber Disc : Q56- Q62- Q66 -Q72- Q75 mm

Independent Disc Harrow Components Disc : Q56- Q62- Q66 - Q72

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

fako® Glass fibre adhesive 9119Xtra is a solvent-free plastic dispersion adhesive, which is characterized by high elasticity and initial adhesion, a thixotropic one-component adhesive with short drying time. fako® glass fibre adhesive no. 9119XTRA complies with the requirements of IMO FTPC part 5 for low flammability, and is affixed with the «Wheelmark» (mark of conformity), the European regulatory marking of all marine equipment, as defined in the Marine Equipment Directive (IMO/MED). Application area: in shipbuilding for "A", "B" and "F" class divisions. Purpose: bonding of glass fabric to mineral wool in pipe and surface areas, bonding to sheet metal, as well as for production of glass fiber fabric cover on rubber products (e.g. Armaflex). It can be used on all load-bearing surfaces, such as plaster, plasterboard and concrete.

clamb set

With Conform® components our customers can reduce their procurement and assembly costs: We handle the preceding processes thus enabling slimmer procedures at our customers’ own production facilities. So that we can meet the wide variety of component needs for our customers, we work within a network of certified partners. Some examples of components made to customer specifications: cold-formed parts in steel cold-formed parts in aluminium rubber decoupling elements plastic injection-mouldings stampings metal bending parts non-detachable washers or sealing rings

Here at Knight Optical, we understand that there is no one size fits all for your optical component specifications. That is why – as well as edging down our stock optics – we also offer our entire range as custom-made components. This bespoke option is popular across a variety of sectors such as defence and aerospace, medical and research as well as engineering and manufacturing industries; to name a few. By opting for our customised service, not only will you be able to choose the material, millimetre-perfect dimensions and thicknesses best suited to your application, but you will also be able to pick appropriate optical coatings to protect or enhance your device's operability. If you would like to discuss your optical requirements with a member of our team or to find out more about our custom-made optics, please get in touch on +44 (0)1622 859444, choose option One. Alternatively, click here to view our full range of custom-made optics.

Upgrade your fastening capabilities with our range of carbon PEEK locking accessories. These high-performance components are designed to provide durable and lightweight solutions for secure fastening. With reliable locking mechanisms, they effectively resist vibration and maintain a strong grip even in demanding environments. The temperature and chemical resistance of PEEK make these accessories suitable for a wide range of applications. Reinforced with carbon fiber, they offer enhanced strength and durability. Whether you're in aerospace, automotive, or industrial sectors, our carbon PEEK locking accessories deliver exceptional performance to meet your fastening needs. Carbon PEEK locking nuts stands for carbon filled polyetheretherketone, which is a high-performance thermoplastic material known for its excellent mechanical and chemical properties. Carbon PEEK locking nuts are typically made by combining PEEK with carbon fiber reinforcement.

Component assembly is an important phase in the manufacturing process. It requires attention to detail in order to join together all components to create a functional product. Though we specialize in manufacturing machined components, we can provide assembly services, when the client requires. Stages of component assembly: - The manufacturing of machined parts, - Planning of sequence, - Fitting and alignment, - Fastening and joining, - Quality control.

Component assembly is an important phase in the manufacturing process. It requires attention to detail in order to join together all components to create a functional product. Though we specialize in manufacturing machined components, we can provide assembly services, when the client requires. Stages of component assembly: - The manufacturing of machined parts, - Planning of sequence, - Fitting and alignment, - Fastening and joining, - Quality control.

Component assembly is an important phase in the manufacturing process. It requires attention to detail in order to join together all components to create a functional product. Though we specialize in manufacturing machined components, we can provide assembly services, when the client requires. Stages of component assembly: - The manufacturing of machined parts, - Planning of sequence, - Fitting and alignment, - Fastening and joining, - Quality control.