Handling transporter - Import export

For non-mechanized terminals, slave pallets are an essential tool for handling and transporting ULDs. The pallets are equipped with four rows of 16 non-powered rollers. There is a non-slip treadplate between the rollers that allows the pallet to be walked on. Slave pallets can be transported using powered conveyor systems or the Lödige Mini and Lödige Robby, as well as using our slave pallet mover. Flexible setup of work stations Flexible storage options Flexible transportation option IATA-compliant handling of ULDs Stackable to save space.

The lightweight and compact drum sanding machine! Ideal for smaller surfaces and popular in the rental business. Especially DIY enthusiasts like to rent the PROFIT, because it is easy to handle and transport. Based on proven LÄGLER® technology, the PROFIT with its centrifugal drum is also a good option for private users. The abrasive sleeve can be changed quickly and easily. Its compact design and the resulting manoeuvrability make it suitable for smaller areas. Despite its relatively low weight, the PROFIT achieves good work quality and an appealing sanding performance. Applications with the PROFIT: The PROFIT is mainly used for sanding of wooden floors. It shows its strengths especially in easier renovation works and the treatment of small and hard-to-access areas.

The robust steel construction is the optimal solution for secure handling, efficient transport and careful storage of coils and wire coils. secutex coilprotect “Altus” is suitable for all coil sizes. The robust steel construction can be easily mounted. It is ideal for the erection of longterm storage spaces. This coil storage can be loaded with coil hooks and coil tongs. The valuable coils resting upon the support surfaces are protected by secutex impact protection. In comparison to other chemical materials, secutex is extremely resistant to wear and tear.

COMMERCIAL AIR HUMIDIFIER TTK 140 SPowerful technology for workshops, storage spaces and construction sites With this compact industrial dehumidifier you can benefit from a budget-friendly dehumidification solution without compromising in terms of workmanship and reliability. The TTK 140 S available exclusively at Trotec is of traditional EU manufacturing and demonstrates in a respectable way that a price level of the Far East is indeed compatible with robust brand quality. Four swivel castors with RollStop catch and two integrated recessed handles simplify the transport and positioning of the device. Thus you can apply the TTK 140 S flexibly for various drying operations, for example for dry keeping of heated and unheated living, sanitary, storage or basement rooms, garages and workshops.

COMMERCIAL DEHUMIDIFIER TTK 350 SProfessional all-rounder for demanding drying operations Black and white combined in a powerful device. The TTK 350 S makes you stop thinking in terms of black and white or good and cheap. It is simply both combined in one device, allowing you to benefit from prices at a Far East level without compromising in terms of workmanship and reliability. For the quality of this dehumidifier is no accident – but traditional EU manufacturing. Not only the plastic-coated metal housing but also the stable carriage construction with bar handle and large transport wheels for maximum mobility demonstrate the dehumidifier's robust and durable design. The operating switch and the filling level warning light are protected from dust and spray water by a protective cap, and a slotted hygrostat rotary switch protects against inadvertent misadjustment of the switch position.

COMMERCIAL DEHUMIDIFIER TTK 105 SThis robust lightweight makes a good impression even in rough surrounding conditions As to be expected from such a high-quality device of German manufacturing, the TTK 105 S impresses with a perfect combination of robust exterior and progressive interior. The hard-wearing power pack is provided with a stackable aluminium housing. This eases transport enormously – and handling, too: Instead of using unreferenced adjustment levels between minimum and maximum operation, with the TTK 105 S you can directly enter the desired humidity value via the digital display where the current temperature and humidity values of the room air can be read at all times. An integrated hygrostat implements the selected target fully automatically and adjusts the performance of compressor and two-staged fan.

COMMERCIAL DEHUMIDIFIER TTK 171 ECOExtremely versatile, extremely powerful In this powerful dehumidifier you have a particularly economical solution for many typical dehumidification tasks in the commercial sector. The carriage construction with handle bar, recessed handles and big wheels makes transporting even on difficult terrain or stairways much easier. For quick start-up the dehumidifier TTK 171 ECO comes with an easy-care control panel with digital display of all functions. For hygrostat-controlled automatic operation the target value can be selected in percentage steps, this value will then be indicated along with the current actual value. By means of the timer switch-on and switch-off time can be configured and owing to the integrated memory function the settings are saved even after a power interruption.

Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.

Gmöhling’s versatile transport trolleys are available in different sizes and versions. Standard versions include trolleys with smooth, ribbed, perforated and anodised sides. An essential feature of our transport trolleys is the cut-out/hinged or sliding panel on one side for ease of loading and unloading. Our light and robust transport trolleys have multiple uses for storage and transport in your logistics. They have proved themselves over the years in many sectors such as industry, the automotive, disposal and pharmaceutical industries and the hospital, laundry and catering sectors, etc. We offer various wheel systems according to load weight to guarantee easier handling. We can also supply transport trolleys with an appropriate hinged lid to your required size. Containers of aluminium with smooth surface With reinforcement rims at top and bottom for load stability With fold-down side for easy loading and unloading Antistatic and do not attract dust or dirt With full- rubber...

The Puro® compact scale range offers durable, compact and multi-functional weighing solutions. Large, bright displays, tactile keys, a traffic light function (Hi-Lo-Go) and an intuitive navigation make Puro® one of the most userfriendly scales to be used in any situation that requires industrial weighing. Multi-purpose scales and a special count scale are available to choose from. —Wide range of scales for every purpose —Large display and a traffic light function for high operational comfort —Sturdy design for heavy usage —Instant stabilisation —Highly developed battery with exceptional operating time —Easy charging via USB-C —Smart connectivity and application packages —One large count scale model including professional applications —Built-in handle for easy and safe transport

COMMERCIAL DEHUMIDIFIER TTK 170 ECOHighly efficient. Extremely robust. Incredibly low-priced. In case of the TTK 170 ECO the name says it all: Its favourable price impresses as much as the high dehumidification performance, and this attractive value-for-money ratio makes the TTK 170 ECO the first choice for all commercial users looking for a particularly robust and economic dehumidifier. Thanks to the professional hot gas automatic, the TTK 170 ECO achieves high dehumidification levels also at low temperatures in unheated rooms or on cold building sites. A frequent change of location from one building site to another or the application in rough surroundings and on difficult terrain does not pose a problem for this condenser dryer: The robust steel construction in carriage design with transport handle and big wheels can withstand a fair bit and can easily be transported to any operating site.

The TTK 122 E allows for easy transport of bar handles and steering wheels on both sides. The operating comfort is not affected adversely by the solid design. Membrane keys that the operating panel is equipped with is easy to clean and the desired air humidity for example, can be a direct input through the digital display. The selection switches with only one less value are energy saving giving an advantage that is practical in comparison to other dehumidifiers that are analog controlled. The TTK 122 E has a display that can show the dominant air temperature during the function of climate control. It works with full automatic performance as an alternative to the TTK 120 E. For accelerated textile drying it disposes a super-dry functionality. When it comes to wet laundry, carpets, or cloth it is especially practical for faster dehumidifying.

Since decades, Reinhardt ovens “Made in Germany” are working day by day all over the world and are estimated by their reliability and long life time. Adapted to your requirements, a Reinhardt oven delivers the best results that are completely designed to your production process. In the temperature range up to 650° Celsius Reinhardt offers the best solutions for almost all requirements, for heating, tempering, drying, hardening, etc. all designed to your space conditions. All heating technologies, from electrical, direct or indirect gas, oil can be applied. Together with the customer, the Reinhardt industrial ovens are integrated into the production flow. In a classical batch oven, hood oven or pass through oven all thermal processes can be applied with the highest accuracy. Requirements such as lifting doors, charging carrier, transport and handling systems can be easily applied.

Strong performance - efficient solution!When it comes to efficiency, hardly any other device can keep up with the low-cost solution TTK 165 ECO. The dehumidifier manages about 52 litres in 24 hours – an impressive drying performance for the commercial sector. The TTK 165 ECO is equipped with an external condensate drain – with an optional external pump if required – and is thus perfectly suited for longer unattended drying operations. Besides, the condensate tank can be removed and thus quickly and easily emptied. Thanks to the carriage design steel construction with a transport handle and large wheels, the TTK 165 ECO can be moved without difficulty even in the often harsh surroundings on construction sites. The convenient cable holders on the rear of the device offer additional transport safety.

COMMERCIAL DEHUMIDIFIER TTK 570 ECOOur value-for-money champion for commercial dehumidification and dry keeping If your credo in looking for a dehumidifier is "to get as much as possible out of as little as possible" the TTK 570 ECO is the ideal drying unit for your requirements. This construction dryer unites professional performance characteristics and a budget-friendly design and can withdraw a daily maximum of 127 litres of water from the room air. The robustly manufactured TTK 570 ECO presents itself with a solid steel construction in carriage design, as such it also leaves a good impression in rough construction site conditions. The combination of ergonomic push handle, large full-rubber wheels and feet with rubber buffers at the front affords ideal handling characteristics, simple transportation and secure footing for drying applications.

Particularly economical solution for typical dehumidification applications in the commercial sectorWhen it comes to efficiency, hardly any other device can keep up with the low-cost solution TTK 166 ECO. The dehumidifier manages about 52 litres in 24 hours – an impressive drying performance for the commercial sector. The current room air humidity and temperature can be easily read from its large digital display both in standby and dehumidification mode. The desired relative room air humidity can be set to values between 10 % and 95 % in steps of 1. Hence, humidity-dependent drying control is not a problem thanks to the integrated hygrostat. The striking signal red paint makes it impossible to overlook the dehumidifier on any construction site. Thanks to the carriage design with a transport handle and large wheels, the TTK 166 ECO can be moved without difficulty even in the often harsh surroundings on construction sites.

For protecting and preserving your goods, half-tubular film packing of Gordopack is your best option. Our half-tubular protective films secure various objects and packed food items during transportation, storage or handling due to their very different designs and numerous fields of application. Especially the shrink foil is preferred in this area. Another field of application for half tubular foils is, for example, as linen foil, which is mainly used in the field of textile cleaning. It offers sufficient protection against renewed contamination already during transport home. Product can range from HDPE/ MDPE/ LDPE/ PCR with straight-cut edges, perforated on roll, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

Working with the HB 950 is ideal if the hot-melt adhesive is applied from above. By hanging the hand gun on a balancer, you can work in a way that is gentle on the muscles and tendons. The safety and protection of the user are ensured by the insulation of the handle, which also does not transport any adhesive. A 1.2 mm bead nozzle is pre-assembled. The standard version has a PT100 temperature sensor, others are available on request.

A robust and versatile power tool tailored for heavy-duty household tasks. With its 1800W induction motor, it delivers a maximum pressure of 140 bar, making it ideal for a wide range of high-pressure cleaning applications. Its ergonomic design ensures comfortable, fatigue-free operation even during extended use. The RP-0140 excels in heavy-duty household chores such as rust removal, descaling, paint stripping, and tackling greasy and oily residues. When it comes to convenience, this high-pressure washer doesn't disappoint. Despite weighing 14.7kg, its ergonomic design, coupled with attached wheels and handles, facilitates effortless transportation. If you're considering adding a high-pressure washer to your store's inventory, the Ronix RP-0140 is an excellent choice that will satisfy your customers.

The transport and stacking boxes are an indispensible part of smooth logistics in the food processing industry. They facilitate easy handling and reliable, hygienic transport processes. Characteristics: — Available in various sizes and versions (Stacking box: 25 l, 55 l, Transport box 40 l, 80 l) — Made from pure HDPE — High load bearing capacity and impact resistance — Nestable (40 l, 80 l) — Stackable (25 l, 50 l, 55 l) — Resistant to most common chemicals and cleaning agents — Easy to clean thanks to smooth inner and outer walls

Solutions for the transport and handling of parts. The question of how surface coating plants can be optimally integrated into a production environment arises with ever increasing frequency. Rippert offers its customer an ‘everything from one source solution’ here. The company’s own engineers develop coordinated solutions for the transport and handling of parts together with the customer. Simulation is thereby often the right tool for recognising the full potential of these possibilities. From frying pans to heavy workpieces from the wind power sector, Rippert has already ‘taken it all in hand’. We work on concepts in which industrial robots substitute or supplement the classic conveying equipment in coating plants. For handling tasks we often see the necessity for systems that work adaptively; this means that, for example, image processing systems must recognise the accurate position of parts in two and even three-dimensions so that a robot can pick up inaccurately positioned parts.

How do you normally transport large OSB or particle boards? That usually requires multiple employees and work steps in order to transport heavy and bulky goods from A to B. Thanks to AERO-PORO vacuum lifters from AERO-LIFT, such problems are now history! Now your existing crane can be made much more effective by adding an AERO-PORO lifter. The crane operator can now lift, transport, swivel and deposit workpieces all on his own. Safely without damage and assistance. Tailored to your requirements, our AERO-PORO lifters are able to transport very large panels with ease and can even generate a reliable vacuum when handling porous materials. Previous Next Functionality and characteristics Handling, transport and swivelling of hundreds of kilo heavy porous wooden boards in saw mills, carpenters and in the wood and furniture...

In addition to a horizontal transport, the load can be turned: either manually by sheer muscular strength and a prying effect or pneumatically. That way, even large and heavy loads can be moved quickly and easily to the desired position. Due to flexible operating handles, bulky materials can be lifted and lowered easily even at great heights. An extended operating handle is provided for the transport of plate materials and large goods. The tube lifter can be switched on and off via radio by means of a small transmitter located at the tube lifter. To reduce noises, the blower can be mounted inside a sound insulation box. In addition, the blower can be mounted at walls or columns by means of optional mounting brackets. You wish to transport different goods? The optional quick-release coupling can be used to change the suction pads quickly and easily. Optionen und Einzelkomponenten für Schlauchheber Bendable handle, inox suction head with rotary handle suction head with strap...

For each good to be transported and each application, numerous load handling units are available. No matter if the good to be transported is uneven or unstable, whether sacks are not filled properly or cartons are provided with a hooping, the right load handling equipment will make the transport possible. Due to a quick-release coupling, the load handling equipment can be changed quickly to transport different goods. barrels, sucking from above barrels, sucking from side suction cup for cartons suction cup for 4 cartons suction cup for paper and foil coils Food for boards, pneumatic swivelling Handling of chimney elements paletts gripper sacks, tube lifter inox Handling of water canisters carton handling, fixed at side Hook to handle canister and buckets mechanical gripper for boxes

Handling, swivelling and transportation of cupboard, boxes, housings and other loads with the AERO-LIFT box grippers. Two arms with hand slide valves or elektro magnetic valve, electronic warning system with vacuum and power supply check. Big and heavy Sample applications Vacuum box-gripper up to 100kg Vacuum lifting device for boxes and boards. Load bearing capacity 100 kg. Handwheel to swivel the boxes manually. Box gripper to handle steel sheet cabinets Handling and swivelling of steel sheet cabinets with a vacuum box gripper. The inox steel sheet cabinets have a total weight up to 400 kg and a dimension of 1800 x 400 x 600 mm up to 2200 x 850 x 1600 mm.

Vacuum lifting devices standard are for the horizontal handling of plates. Transportation auf sheet metal, plastic plates, covered wooden plates or glass panes up to 2000 kg. Loading and unloading of machine tools. All AERO-LIFT vacuum lifing devices are build according the actually safety regulations EN13155. Standard lifting device AERO 350-6R Functionality and features Die Vakuumerzeugung der Vakuumheber geschieht durch wartungsarme trockenlaufende Drehschieberpumpen , ölumlaufgeschmierte Vakuumpumpen mit sehr hohem Endvakuum, druckluftbetriebene leistungsstarke Vakuumejektoren beim AERO-LIGHT oder Vakuumgebläse mit Sicherheitsnachlaufschwungmasse bei luftdurchlässigen Transportgütern. Alle AERO-LIFT-Vakuumheber haben eine nach EN13155 vorgeschriebene automatisch...

Adjustable Handles: - Patent-pending adjustable handles for greater operator comfort. - Adjustment allows operator to be closer to cutting side for easier alignment and straighter cuts - Handle can be folded for transportation Depth Indicator: -Cut depth indicator shows both millimeters and inches IntelliSeal: -Patent-pending fully enclosed cutting shaft that is maintenance-free for at least 250 hours, eliminating the need for daily bearing lubrication Large water tank: -Large water tank made of impact-resistant plastic equipped with quick-connect coupling for water line connection on top of cut-off wheel guard -No tools required for disassembly

-The original BAUER shovel for handling and transporting bulk materials -simple pick-up using forks -can be emptied at any height by cable operated from the driver‘s seat -body walls with reinforced edging -special steel blade trim -sturdy frame -can be secured to prevent slipping Types available -Type BSE mechanical -Type BSE-H hydraulic -Type BSM mechanical, with trough opening for forks -Type BSM-H hydraulic, with trough opening for forks -Type BSI mechanical

• cutting knife principle • with cap lifter in the handle • hardened knife and transport wheel