Vibrators - Import export

The LVW series covers smaller applications with machines of approx. 500 mm width and large applications up to a width of 2000 mm, like pallets, bumpers and more. As a principle our standard machines are equipped with an hydraulic lifting table. Depending on the machine size a contact force of up to 70 kN can be applied. This is necessary for large suction pipes made of PA 6.6 GV30 with heavy distortion or very large welding surfaces. Our vibration welders are fitted with our patented CPC system. This kind of regulation which is integrated in the converter stimulates the vibration unit with optimal resonance frequency. A low energy consumption is guaranteed during the friction phase. It is not necessary to enter the frequency parameter in the machine, as it is permanently “optimized”. This, the KLN drive systems are independent from the tool weight. The tool weight is solely limited in height, caused by the mechanical design and the high accelerating powers arising in these systems.

Typical fields of application for our vibration damping mats include: - Heavy machine tools - Injection molding machines - Hydraulic systems / hydraulic presses - Punching machines / punch presses / automatic punch presses - coining presses - Die hammers - transformers - generators - Transport carts / truck trailers - Sensitive measuring, electronic and testing equipment, e.g. precision balances and microscopes - Vibration isolation of machine foundations - Vibration and noise damping of rails installed in the track system (high-speed trains, subways, streetcars)

Anti-vibration mats and pads for industry, laboratories, machinery, measuring devices, compressors, cooling units, generators, pumps, buildings, construction, rails etc.

Anti-vibration mats and pads for industry, machinery, compressors, cooling units, generators, pumps, buildings, construction, rails etc.

AViTEQ Vibrating table can be used both for compression and also for loosening bulk material. Typical applications are compacting of e.g. concrete mixes or the unstick/knock out of molds. There are two different approaches: The load to be vibrated, is set loosly on the table or firmly clamped to the vibrating device. Advantages & benefits variable, can be used for different tasks easy to regulate with magnetic vibrator Construction Compact design, with attached magnetic vibrator/s or unbalanced motors below the tabletop. Selection The sizing depends on: bulk material, such as bulk density, particle shape and internal friction the properties of the container, such as height, stiffness and sidewall Key figures length: up to 4,000 mm width: up to 2,000 mm payloads: up to 3,000 kg drive: magnetic vibrator, unbalanced motor, exciter

AViTEQ Magnetic vibrators can be used very versatile. The advantages of magnetic vibrators match all designs of vibrating machines. For almost each case of application in the vibration feeder technology and over all industries magnetic vibrators are the favorite system, in particular if it depends on high dosing accuracy. Magnetic vibrators are made in Germany on a highest standard. Advantages and benefits easy and continuously adjustable during running conditions PAL System (protection for wrong amplitudes) available for 25/33/50/100 (30/40/60/120)Hz variants immediate start/stop after switching linear amplitude Reliable permanent use High level of performance with compact dimensions Wear-free, without rotating parts Efficiency (long operating cycles and service life) Newest state-of-the-art of production engineering Conformity with all EC Guidelines, which affect the drives available for explosion-endangered spaces (Ex) available for 60 Hz power systems and other mains voltages Temp

AViTEQ Hopper impact vibrators/bin activators errect bunker walls by periodic oscillations in shock and so the friction between the bulk and bunker wall (caking). They are just for knocking out of forms, for shaking of chutes and downpipes, for better emptying of containers and bulk materials from adhering to solve, for example in filters. The most common activators are unbalanced motors and magnetic vibrators. For special and heavy demands, there are impact vibrators available. Advantages & benefits magnetic impact vibrators excite the bunker walls with aligned linear oscillations. They have no "run out" and respond immediately after switching; the vibrational intensity can be adjusted at the control unit unbalanced motors have a rotating direction of force, they put the bunker wall in uniform, universally effective vibration large vibratory force at small dimensions robust and undemanding Construction In certain cases, a single drive can already act as an activator. If there i

AViTEQ-Vibrating screens are robust, durable, bulk material adapted heavy workers, which are used as discharge units with integrated screening function below a silo, hopper or bunker or as functional organs to feed belts or crushers. Depending on the task, the devices are designed with a robust inlet area with liners (wearing plates) followed by two or three bar grate levels. Each rod is made in a tapered shape which results in a widening gap and bulk jams are avoided. The areas to use such strainers are the primary industry, stones, earth, coal industry with grain sizes up to 1,000 mm in length, but also the chemical and food industry. Everywhere, where a roughly screening and separation of fine and gross material is needed. Advantages & benefits Wide range of applications: product to feed screening of gross grain separation of gross grain before classifying separation of fine grain from crushers protection screening in front of conveyor belts Construction The main components ar

AViTEQ-vibrating heat exchanger are used in a number of processes in which bulk solids have to be cooled, heated, dried etc. These special-purpose units are able to perform the heat exchange process during transportation. Usually, this occurs indirectly through the use of double bottoms to accommodate the heat exchange medium (oil, water, air, etc.). AViTEQ heat exchangers are employed in practically every industry (chemical, food, plastics, pharmaceutical, recycling and raw materials). The spiral conveyor, which offers large heat exchange surfaces from a small footprint through its coils, is an especially cost-effective solution. A laser-welded version, which offers maximum density in return for minimum heat admission during manufacturing operations (no welding stresses to cause delays), is playing an increasingly important role for these special units. Advantages & benefits gentle product treatment optimised and customised modification to suit existing processes low wear and pra

Schwingmetall® The perfect combination of rubber, plastics and metal With the ContiTech-Schwingmetall® series, EFFBE provides a product range offering top quality rubber-to-metal bonded products for machine building applications and the automotive industry. The ContiTech-SCHWINGMETALL® product range has stood for top quality rubber-to-metal bonded products for more than 50 years. That's why these components in a combination of plastics, rubber and metal are also the first choice for EFFBE customers. We offer buffers, stops, dome mounts, flange elements, hydro mounts, special elements, torsion elements, rails and inclined supports.

Reliable and precise at a pressure difference of 0.01 bar The diaphragm pressure cylinders in EFFBE pneumatic devices work reliably even under the harshest conditions and with no stick-slip effect. The pneumatic cylinders in EFFBE pneumatic devices work reliably even under the harshest conditions and with no stick-slip effect. Even extreme environmental conditions can not affect the performance of our rugged pneumatic devices with diaphragm. EFFBE pneumatic cylinders operate precisely and reliably at a pressure difference of 0.01 bar. As sensitive pressure regulators, they guarantee precise control processes with no stick-slip effect, which as a rule can not be achieved with piston cylinders. Further advantages of diaphragm regulators: EFFBE actuating cylinders are of simple design, maintenance-free and require neither grease nor oil for operation.

Our excellent reputation motivates us to tackle new challenges every day With the qualities EFFBE 295 and EFFBE Urelast®, EFFBE sets new standards in the service life and settling behavior of elastomer springs. Our elastomer springs stand for many years of permanently elastic and unbreakable use, for example in cutting and punching tools. Our customers around the world appreciate the quality of the EFFBE product ranges, which also offer a favorable price-performance ratio and high cost-effectiveness due to zero maintenance. Awareness of our excellent reputation motivates us to tackle new challenges every day. That's why our engineers and designers develop customized parts for you, if our standard ranges are unable to solve your problem. Elastomer compression springs are regulated by the standard DIN ISO 10069-1. Our qualities EFFBE 295 and EFFBE Urelast® meet this DIN standard and even surpass it in terms of service life and settling behavior.

With maintenance-free Levelmount® machine supports, EFFBE meets the high expectations for the elastic support of machinery, plant and equipment. Thanks to our sophisticated logistics, we deliver most EFFBE parts directly from stock without delay. Nowadays, in the installation of machinery ever greater demands are placed on elastic supports: It is important to combine increased work performance with optimized production processes and greater environmental awareness, from vibration protection and noise insulation to vibration decoupling. EFFBE faces up to this challenge with maintenance-free Levelmount® machine supports, which keep rational, reliable production planning free from structural and environmental constraints. We offer vibration dampers and vibration isolators tailored exactly to your needs to reduce the transmission of vibrations - right through to vibration decoupling.