Results for
GEPPERT RÜHRTECHNIK GMBH
Germany
The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric container mixers are delivered with on-/off-switches with low-voltage breaker.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
CR-E - electric tote tank mixer for plastic IBCs The tote tank mixers CR-E are designed for operation on plastic containers with filling openings of 150 mm and volumes from 600 l up to 1,200 l. The customer may choose between various viscosity-related basic versions of fast-running and slow-running mixers with electric drives. The agitator shafts are connected to the drive shafts with sleeve couplings or borne within the gear’s hollow shaft (worm gears). The agitator shafts are balanced for concentric run after assembly. CR-E 6 0,75 The mixer is mounted on a container traverse bridge, which is included in the scope of supply and clamped with a rapid fixing system to the cage frame of the IBC. The plastic bulk of the container is therefore not harmed by any static or dynamic loads by the agitator. The fixing of the traverse bridge is adjustable for various container models. The impellers are designed to fit through the filling opening 150 mm when being inserted. The electric...
Request for a quoteRINGFEDER POWER TRANSMISSION GMBH
Germany
One-part design - Standard hub The coupling TSCHAN ® TNM E is a torsionally elastic and puncture-proof claw coupling. It balances out angular, radial and axial shaft misalignments within defined limits. The coupling transfers the torque via pressure loadable, elastic buffers of Perbunan (Pb) which are joined together as an intermediate ring. The elastic intermediate ring can cushion impacts and torsional vibrations; it is oil-tight and electrically conductive. The coupling is usable in every sense of rotation and installation position. TSCHAN ® TNM E One-part design - standard hub. Elastic intermediate ring in different hardnesses: standard Pb72, hard Pb82. General features Torsionally flexible, compensate for angular, radial and axial shaft misalignment Intermediate rings loaded in compression Elastomers available in various shore hardness degrees Suitable for temperatures from –30°C to +100°C The elastic ring can be replaced without having to move the coupled machines...
Request for a quoteMOTAN-COLORTRONIC GMBH
Germany
Both the LUXOR E A and LUXOR EM A dryers with optional ETA plus® energy saving technology are specifically designed to supply consistently low dew-point air to one drying bin, while reducing energy consumption. The LUXOR E A dryer is designed for use with existing conveying systems or hopper loaders. Whereas the LUXOR EM A offers a machine dedicated solution with integrated dry air conveying for up to two processing machines and the drying bin. There are three sizes with drying bin capacities of 60, 100 and 150 litres. The LUXORnet controls utilise modern, flexible BUS-technology. As standard, the colour touch control manages the dry air generator, one drying bin and with the EM version, material conveying to one drying bin and two processing machines. The integration of dry-air conveying and material proportioning provides maximum flexibility and productivity.
Request for a quoteTHIELMANN ENERGIETECHNIK GMBH
Germany
CHARACTERISTICS Decentralized application Optimal load-case design Optimized flow stream design Vibration-optimized design Leaflet: E-3015-Waterbath Heater / Type VH OPTIONS FOR HIGH PRESSURE TUBE BUNDLE Customer-specific design for various design codes (ASME, EN 13445, SVTI, AS1210, PD5500 etc.) Design according to TEMA Customer-specific approvals Customer-specific testings Application for sour gas (NACE) Design for low temperature down to -50 ° C Design pressure up to 300 bar Customer-specific nozzle arrangement Water jacket design as pressure vessel Water tank vessel for hot water> 100 ° C GENERAL Indirect water bath heaters type VH are heat exchangers (heat exchangers) which can heat the gas decentrally if no hot water treatment (for example a boiler system) is available. The heating of the gas is necessary in order to counteract the Joule-Thomson effect during pressure reduction or to provide a defined gas temperature for the following system components. The most common...
Request for a quotePULSARLUBE GMBH
Germany
The Pulsarlube E is designed to offer superior advantages in cost competitiveness and user friendliness over conventional gas type SPL units. The Pulsarlube E has a creative and innovative design which satisfies a wide variety of demands for industrial applications. It operates based on the proven technology of electrochemical reaction which generates inert Nitrogen (N2) gas through the systematic use of an electrolyte and electrical energy. Highly cost effective Easy to install and simple to operate Five available dispensing periods: 1, 3, 6, 9, and 12 months Convenient for use in confined spaces Durable and reliable engineering Transparent container for easy visual inspection of lubricant levels Resilient 1/4" NPT/BSPT compatible output thread
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
E-design - Import exportNumber of results
6 ProductsCountries
Company type