Assembly - Import export

In our workshops, our experienced team assembles small subassemblies, devices, but also complete production systems. Bellingerstraße 3a: 1.000 m² assembly area (door height 4,5 m) with 10 t indoor crane

Low shrinkage optical camera module adhesive with LED and/or heatcure for common substrates used in camera modules and LiDAR assemblies, in active alignment, and other optical bonding applications. Features: - Rapid LED or UV/Visible light and/or heat cure - Very low volumetric shrinkage - High Tg and Low CTE - Low ASTM E595 Outgassing - No frozen storage, refrigerated shipment/storage 15°C [3441° F]

MD® 250CTH epoxy is designed for rapid assembly of medical devices with flexible curing options using light only, heat only, or combination of the two. Features: - Cures with UV/Visible light - Secondary heat cure at 8085°C - Flexible light and heat cure - Semiopaque white color - Volumetric shrinkage at 1.3% - High modulus and durometer - No nonreactive solvents - Compliant with ISO 10993

Features: - Fast cure with LED (385 nm) or UV/Visible light - See Cure dispenses blue, cures clear - UltraRed® fluoresces bright red - One part formulation - No nonreactive solvents - Compliant with ISO 10993

Cable assembly by bda connectivity is designed for high performance and long service life. Extremely low PIM guarantees network performance while the rigidness of cable structure ensure for installation in toughest environment and workmanship. Various cable types and connectors are available for customer project demands. Cable types are including RF coaxial cable, leaky cable, optical cable, etc, while connectors are including N, 7/16, 4.3-10, TNC, etc. Please contact your nearest sales representatives for more details cable assembly services.

Hydraulic pull-in device for mounting bearings max. pulling force 100 kN, stroke up to 200 mm, horizontal design Application The bearing press is suitable for the simple mounting of bearings, plain bearings or sleeves/bushings by hydraulically pulling them into the bearing seat. Main areas of application - Industrial assembly workstations - Mounting bearings in housings - Maintenance work - Bearing assembly on large/heavy components Description The bearing press is designed for the hydraulic insertion of bearings into housing components and is available in a horizontal design. Guided on a knuckle boom crane with a balancer (not included in the delivery), the bearing press can be used ergonomically anywhere and can also be mounted on a trolley. The pullin cylinder can be used either from the right or left by converting the hydraulic cylinder. The device is operated by means of a twohand control.

UNT 6 and UNT 10 are reliable machines for the production of reusable hose assemblies, insertion of high pressure fittings or even to use with a skiving tool. Modell:UNT 6 Maximum Hex or hose diameter 0 40 mm (1,57") Maximum travel distance 0 500 mm (19,68") Industrial* 7-55 mm (0,02" - 2,16") Motor rotation (RNP) 101/207 Noise level (dBA) 70 L x W x H (mm) 1600x550x850 Weight 176.5 Kg

This two piece self-centering design is cost-efficient for medium torque applications. During mounting, slight axial displacement of the hub occurs. Available in very small sizes. 7061 ECOLOC Self-centering, cost-efficient two piece locking assemblies for medium torques. During mounting, minor axial displacement of the hub occurs. Due to the small number of screws, cost savings during mounting are ensured. For disassembly only few release screws are required. Also availabe for very small shaft diameters. Explanations L = Overall width L 1 = Overall width (without screws) d = Inner ring diameter D = Outer diameter

Extended version of the 7003 allowing for use with smaller hub diameters due to the reduced shaft and hub pressures. 7004 ECOLOC Is the extended design of series 7003 ECOLOC. Here, due to the low pressure the hub can be designed very cost-effective (small outer diameter). Explanations L = Overall width L 1 = Overall width (without screws) L 3 = Clamping length d = Inner ring diameter D = Outer diameter

Two piece design similar to 7006, but extended with lower shaft and hub pressures. 7007 ECOLOC Is a modification of 7004 ECOLOC with all its positive features, but here - same as 7006 ECOLOC - the axial displacement during mounting is averted. Explanations L = Overall width L 1 = Overall width (without screws) L 4 = Installation length up to colar L 3 = Clamping length d = Inner ring diameter D = Outer diameter D 1 = Collar outer diameter

The original RINGFEDER ® Locking Assemblies featuring double-tapered thrust rings with self-releasing tapers. They bridge relatively large fit clearances, are easy to install, adjust or remove, but are not self-centering. A pre-centering hub section is usually required. Slimmest design, especially suitable for applications where space is limited. The Locking Assembly RfN 7012 compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Bending moment and radial loads – combined loads can be transmitted. (Please contact our technical department for assistance). Easy installation – RfN 7012 Locking Assemblies can bridge large clearances without the loss of transmission values. Low risk to contamination – during the tightening process...

These flange type units fix the hub positively against their extended flange preventing axial movement during tightening. Applied wherever self-centering action and good concentricity of mounted components are essential and hubs with straight-thru bores are used. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point, preventing bending or lifting of the inner ring during assembly and thereby ensuring easy dismantling. High rotation speed – the dimensional accuracy of the RfN 7013 Locking Assemblies allows their use in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads. Axial hub positioning –...

Three piece self-centering design for heavy duty torques. 7005 ECOLOC Three piece, self-centering, slitted locking assemblies for highest bending moments and torques. During assembly a minor axial displacement of the hub occurs. The front and rear thrust rings are separately released through release threads. Explanations L = Overall width L 1 = Overall width (without screws) L 3 = Clamping length d = Inner ring diameter D = Outer diameter

Two piece design with slit and single taper and without flange can be completely recessed within a component’s hub. Axial position of component not fixed and may move during installation. 7003 ECOLOC Self-centering, two piece low-cost locking assemblies, which can be used - due to the slit - also at larger tolerances. The hub slightly positions during mounting towards the screw head. For disassembly only few release screws are required. Through optimised geometry of the flange, the deformation of the flange is significantly lower than with standard products. Explanations L = Overall width L 1 = Overall width (without screws) L 3 = Clamping length d = Inner ring diameter D = Outer diameter

Precise axial and radial positioning of the components. Easy to connect and to release – no seizures along the shaft. Perfect for engaged connections. Excellent concentricity and radial run. Characteristics Precise axial and radial positioning of the components Easy to connect and to release – no seizures along the shaft Perfect for engaged connections Excellent concentricity and radial run Single locking nut for quick installation and settings Minimal external diameter for assembling thin-walled components Excellent torque transmission even during partial seizures of the shaft Suitable for grooveless and keyless shafts Lightweight, low mass moment of inertia Basic dimensions when screws are not tightened d = Inner diameter D = Outer diameter L = Overall width L1 = Installation length without Locking nut SW = Wrench size T = Transmissible torque at given TA F ax = Transmissible axial force pW = Surface pressure on shaft at given TA pN = Surface pressure on hub at given TA TA =...

Precise axial and radial positioning of the components. Easy to connect and to release – no seizures along the shaft. Perfect for engaged connections. Excellent concentricity and radial run. Characteristics Precise axial and radial positioning of the components Easy to connect and to release – no seizures along the shaft Perfect for engaged connections Excellent concentricity and radial run Single locking nut for quick installation and settings Minimal external diameter for assembling thin-walled components Excellent torque transmission even during partial seizures of the shaft Suitable for grooveless and keyless shafts Lightweight, low mass moment of inertia Basic dimensions when screws are not tightened d = Inner diameter D = Outer diameter L = Overall width L1 = Installation length without Locking nut SW = Wrench size T = Transmissible torque at given TA F ax = Transmissible axial force pW = Surface pressure on shaft at given TA pN = Surface pressure on hub at given TA TA =...

Precise axial and radial positioning of the components. Easy to connect and to release – no seizures along the shaft. Perfect for engaged connections. Excellent concentricity and radial run. Precise axial and radial positioning of the components Easy to connect and to release – no seizures along the shaft Perfect for engaged connections Excellent concentricity and radial run Single locking nut for quick installation and settings Minimal external diameter for assembling thin-walled components Excellent torque transmission even during partial seizures of the shaft Suitable for grooveless and keyless shafts Lightweight, low mass moment of inertia

This locking device, dual tapered similar the 7012 type, is designed to transmit extremely high torques. Unlike the 7012 style, the 7014 device offers good centering ability due to it’s relatively long design, making a pre-centering hub section unnecessary. It’s design also provides for a different inside diameter to outside diameter ration, thereby not interchangeable with the other RINGFEDER types. Available in sizes from 70 to 300 mm. Large transmittable peripheral forces – due to the long, flat cones it is possible to transmit maximum torques and axial forces with one RfN 7014 Locking Assembly. Maximum reliability – due to the flat cones and the relatively wide construction (large guide lengths) the Locking Assemblies RfN 7014 centre themselves. During installation the Locking Assembly, shaft and hub remain in position to one another. The shaft and hub are loaded by pressure, providing additional safety compared to 3-part versions. Example applications: Heavy...

These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. Higher Rotation Speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies...

The original RINGFEDER ® Locking Assemblies featuring double-tapered thrust rings with self-releasing tapers. They bridge relatively large fit clearances, are easy to install, adjust or remove, but are not self-centering. A pre-centering hub section is usually required. Slimmest design, especially suitable for applications where space is limited. The Locking Assembly RfN 7012 compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Bending moment and radial loads – combined loads can be transmitted. ( Please contact our technical department for assistance). Easy installation – RfN 7012 Locking Assemblies can bridge large clearances without the loss of transmission values. Low risk to contamination – during the tightening process...