Aire - Import export

Rotoguide: Micro-jet technology with air bearings from ROTOGUIDE stands for ultimate accuracy, load-bearing capacity and robustness. Shafts and bearing parts are machined to ultra-high precision for a positioning accuracy within µm range. ROTOGUIDE units are especially suitable for highly accurate linear and rotational motion under ultra-high vacuum and for all processes with ultimate demands in terms of cleanliness and accuracy

Rotospray: The air bearing rotary atomizers have been specifically designed for the paint atomization in automated paint streets. The sprayer’s micro-jets ensure finest and consistent spraying at speeds up to 70,000 rpm. Thanks to its high-performance turbine that has been aerodynamically optimized for low air consumption, ROTOSPRAY achieves an enormous performance boost. The air bearing rotary atomizer can handle high loads, making the ROTOSPRAY system especially suitable for use in robotized applications. To cater for individual requirements, the rotary atomizer is available with specific connection layouts and housing variants.

Pneumatic drum mixer for highly viscous media. The FRP-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the drums. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FRP-HX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Special solution for highly viscous liquids of up to 5,000 mPas. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (device group II, category 1-3).

The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers.

The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.

Electric drum mixer for highly viscous media. The FR-HX is Geppert Ruhrtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the tank. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FR-HX is by default equipped with an on-/off-switch with low voltage breaker and – upon request – with a connection cable. . The FR-HX could also be equipped with a frequency inverter upon request. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (Device group II, category 1-3).

Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.

Side-entry agitator for mixing below liquid surface. The PDR is a simple side-entry-agitator for mixing below the liquid surface. The PDR is recommended for applications where low viscous liquids are mixed turbulently in high tanks and where a top-entry mixer would be too heavy due to its shaft length and –diameter. The sealing between the agitator and the vessel is done by means of a single-acting, internal mechanical seal which is lubricated by the mixing product or an additional fluid The agitator shaft is connected to the drive directly with a flange coupling inside the seal housing. By default, this agitator series is supplied with marine type propellers. Other mixing elements according to the mixing task upon request. Solutions correspond to those of the SPR, additionally mechanical seal in sealing housing. Other solutions for this series upon request.

The direct driven agitator SPR is Geppert Ruhrtechnik’s solution for all industrial mixing tasks that demand a turbulent mixing with high peripheral speeds. It is driven by a three-phase-motor with poles between 2 and 8 as well as drive ratings between 0.25 kW and 75.0 kW. The SPR could also be equipped with a frequency inverter upon request (up to 7.5 kW). The agitator shaft is directly connected at the shaft journal of the drive via sleeve or flange coupling. Solutions with quick-change or precisions-change coupling are also feasible for lower drive ratings of up to 3.0 kW. The standard agitator element is a propeller. Other mixing elements according to the mixing task upon request. The SPR can be mounted as a stationary unit or – at a weight of up to 25 kg – it can also be mounted directly onto the open tank via a vessel clamp Up to motor size 112, all SPR series agitators can also be provided with reinforced shaft. Type test certificate numbers for zone 0 (category 1).

The GLP is a pneumatic top-entry series agitator that is used for homogenizing, dispersing, emulsifying and suspending in vessels and for viscosities up to 500 mPas for instance in wastewater treatment, chemical and cosmetics as well as in food industries. The agitator speed adapts to the viscosity of the media being mixed. Compact and easy-to-maintain construction as well as low weight. Power transmission via elastic coupling in the bearing housing. The agitator shaft has a double bearing in an aluminum housing separated from the drive. Speed is sensitively and continuously adjustable, smooth start, insensitive to vapor, dust and smoke. Compressed air keeps all moving parts clean. Insensitive to heat, suitable for high ambient temperatures. Compressed air, expanding in the air engine cools the agitator drive. Includes filters, pressure reducers with pressure gauge that indicates the secondary pressure. Available with a vessel clamp to fix the GLP on a drum.

The NRK series is a compact top-entry agitator that can be used to meet high requirements regarding both surfaces and cleaning inside and outside of the tank. Due to its’ compact design, agitator shafts with diameters of 25 mm and lengths of up to 1,200 mm can be realized, making the NRK the ideal mixer for small tanks in food and drug industry. GMP and FDA conform design. The NRK series agitator has an integrated bearing and coupling housing with flexible coupling to connect drives with shaft journals. The NRK can be supplied with radial shaft seal rings for non-pressurized operation or with liquid-lubricated mechanical seals on pressurized tanks. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3).

SOMOS® RDX attachment dryers are designed for drying small volumes of polymer pellets with throughputs of around 8 to 10 kg/h using in-plant compressed air. They are ProTec's way of providing an economic alternative to conventional drying systems (e.g. adsorption dryers): the compressed air technology used combines perfect drying results with minimal operating costs and virtually maintenance free operation. SOMOS® RDX is available in 38 container sizes of 1 l to 82 l.

Complete Set

Power Airduster Compressed Air 400ml

The COMPACT swift dryers are designed with flexibility in mind. They offer an integrated solution, combining the drying and conveying of the raw material in one unit. The dryers are available in two versions and are each equipped with one drying bin of the size 80 or 150 litres and up to 2 hopper loaders with a capacity of 4 litres each. The COMPACT swift A dryer is provided with advanced functions such as dew point control and dry air conveying function with line purging. Thanks to a modern 7-inch colour display with touch screen, all conveying and drying functions can be shown and monitored in a user-friendly way. 16 user languages can easily be selected.

LUXOR S dryers operate at maximum efficiency and with minimum operating maintenance. The opportunity to have multiple material bins connected to one dry air generator provides our customers with maximum flexibility and no interruption to production. Drying can continue while material is changed in any one bin, minimising loss of valuable production time during material changes. The compact LUXOR S series consists of five models with drying capacities from 40 to 160 m3/h. Each dry air generator can be flexibly combined with a combination of drying bins ranging in size from 15 to 600 litres.

Injection moulders for making very small parts are faced with the unique challenge of being able to dry just the right amount of material for their process. Operating in extremely critical production conditions, these smaller throughputs can present considerable problems. It is important to scale the drying to the size of the moulding machine. The LUXOR CA S 0.75 to 5 range of compressed air micro dryers is specifically designed for small material throughputs. The range comprises of a modular line of correctly sized drying equipment to help moulders meet the small tolerances without waste or contamination. These small dryers take factory supplied compressed air which is expanded to atmospheric pressure. This produces dry process air with a very low dew-point which is then heated to the required drying temperature. No desiccant is required.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. LUXOR CA A series compressed air dryers with ETA­-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications, with material throughputs up to 20 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.

Efficient, accurate material drying is a crucial element in the processing of engineering plastics to ensure impeccable product quality. The fully-insulated LUXOR CA S compressed air dryers provide a cost-effective solution for highly efficient continuous drying of all types of plastic granulate with material throughputs up to 25 kg/h. Dryers can be mounted directly on the throat of the processing machine or on an adjacent support frame.

LUXOR A series dryers with ETA-process® and ETA plus® energy saving technology are specifically designed for supplying dried plastic granulate for many different plastics processing applications. They have either two or three fully insulated stationary desiccant beds with separate process and regeneration blowers which provide consistently low dew-point air to the process, while reducing energy consumption. The advanced LUXOR A series consists of ten models with drying capacities from 80 to 2400 m3/h. Each advanced system dryer can be flexibly combined with all LUXORBIN A drying bins from 15 to 2400 litres. In addition, motan offers a range of extra-large drying bins with volumes from 3,000 to 13,000 litres. These are also available with gas heating. All motan system drying bins are made of stainless steel, are completely insulated, and have individual heating as well as temperature control.