Film - Import export

Thickness range 19-42 µm Film made of Cellulosehydrat, made of renewable resources Pre-Treatment (Surface): sealable, different finishes e.g.: Cellophan® Application: Food Industry, Release, Pharmaceutical Industry & Healthcare, Packing

Thickness range: 15-75 µm Made of renewable resources, biodegradable, compostable Pre-treatment (surface): with / without sealing layers e.g.: EarthFirst®, Nativia®, NatureFlex™ Application: Food Industry, Release, Graphic Arts Industry, Label, Packing

Thickness range: 12,5-125 µm high-temperature resistant Polyimide film partially high-temperature conductive Application: Automotive, Electrical Industry, Engineering Use e.g.: Kapton®, Upilex®

Thickness range: 1,4-500 µm Biaxially oriented film made of Polyethylenterephthalate Optics: glassclear, transparent, milky, white, matt, glossy, opaque, coloured, metallisation on request e.g.: Hostaphan®, Lumirror®, Melinex®, Mylar® Application: Automotive, Electrical Industry, Graphic Arts Industry, Rubber Industry, Card, Furniture Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Label, Lamination, Packing

Thickness range: 16-250 µm (lower thicknesses on request) High temperature resistant, biaxially oriented film made of Polyethylennaphtalate Partially heat-stabilized and / or planarized e.g.: Teonex® Application: Automotive, Electrical Industry, Graphic Arts Industry, Card, Engineering Use

Grammage: 42,5 g/m2 - 120 g/m2 High density Polyethylene Spunbond. tearproof, nailable, dimensionally stable, sewable, water- and weather resistant, printable, punchable, perforable Pre-treatment (surface): different pre-treatments, partially with antistatic properties e.g..: Tyvek® Application: Carrier Bags Application: Food Industry, Graphic Arts Industry, Label, Textile & Household Industry

Thickness range: 50-800 µm plasticizer-free, calendered film made of Polyvinylchloride Pre-treatment (surface): different roughnesses Application: Food Industry, Graphic Arts Industry, Card, Pharmaceutical Industry & Healthcare, Engineering Use, Packing

Thickness range: 25-120 µm Biaxially oriented PS-film e.g.: Polyflex® Application: Office Equipment, Interleaver Application: Food Industry, Graphic Arts Industry, Label, Packing

Description / Characteristics: Thickness range: 15-50 µm non oriented film made of Polypropylen Pre-treatment (surface): one or two sides Corona pre-treated Application: Graphic Arts Industry, Engineering Use, Lamination, Packing

Thickness range: 25-300 µm monoaxial oriented PP

Thickness range: 12-75 µm Biaxially oriented PP Optics: transparent, opaque, white, matt, glossy, metallisation on request e.g.: TI-Films, Treofan, Propafilm® Application: Food Industry, Electrical Industry, Release, Graphic Arts Industry, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing

Thickness range: 15-150 µm Monoaxially oriented Polyamid film, thermostable e.g.: Dartek® Application: Rubber Industry, Lamination

Solvent cast film based on Acetyl-Cellulose Di-Acetate Thickness range: 30-360 µm Up to 115 µm biodegradable, compostable, certified Suitable for food contact up to 250 µm Increased water vapor permeability compared to Tri-Acetate film Special UV resistance possible Tri-Acetate Thickness range: 50-250 µm Higher temperature resistance compared to Di-Acetate film Application: Food Industry, Electrical Industry, Graphic Arts Industry, Engineering Use, Label, Lamination, Packing

Thickness range: 150-800 µm non oriented film made of Polyethylenterephthalate Pre-treatment (surface): Pre-treatments and other additional characteristics possible on request PET-A, PET-G, PET-GAG Application Office Equipment Graphic Arts Industry, Card, Pharmaceutical Industry & Healthcare, Engineering Use, Lamination, Packing

Thickness range: 100-500 µm calendered film made of Polyvinylchlorid Application Office Equipment Automotive, Pharmaceutical Industry & Healthcare, Engineering Use, Textile & Household Industry, Packing

The falling film principle requires an even distribution of the feed liquid. To achieve this distrubution one or more distribution trays are located in the top head of the evaporator over the complete tube sheet. Our proven distribution system makes sure that the inner surface of each individual tube is properly wetted. The liquid film moves down the tubes by gravity force. Heat applied through the tube wall effects boiling-off the light fraction from the film. The picture shows a co-current operating evaporator with vapour and liquid leaving the bottom of the evaporator into the separator vessel.

SMS offers sludge drying systems with horizontal thin film dryers for treatment of sludge from municipal as well as from industrial waste water treatment plants. Variations of this sludge treatment process are: Pre-drying up to 35 to 50 % dry solid content before incineration in fluidized bed incinerators 65 to 75 % dry solid content before combined incineration with garbage, composting or landfill Full drying up to 85 to 95 % before thermal utilization as bio-fuel for cement kilns, coal fired power stations, pyrolysis, gasification or other conversion processes before composting and agricultural usage as fertilizer and for soil reclamation In all these drying processes the thin film dryer is the first choice.

The SMS thin film evaporator type HYVAP serves the increasing demand of the pharmaceutical industry for continuous concentration of heat sensitive, viscous and fouling products. Hygienic design for the pharmaceutical industry The HYVAP is a horizontal thin film evaporator that allows easy access and inspection of the interior and controlled and reliable CIP cleaning. The technology of the HYVAP combines the proven advantages of our conventional horizontal thin film evaporators DKH with the following new features: • Cantilever rotor design • Comfortable rotor extraction • No bearing in product space • Mechanical seal in hygienic design • Electro-polished surfaces • Sight glasses for inspection during operation The new HYVAP DZH offers the hygienic design that meets current GMP requirements. The evaporator sizes range from 0.1 m2 for laboratory to 2.0 m2 for industrial applications. LP steam as well as hot water can be applied as heating media.

The vertical thin film dryer consists of a cylindrical, vertically arranged body with heating jacket and a rotor inside. The rotor is equipped with rows of pendulum blades all over the length of the dryer. The hinged blades spread the wet feed product in a thin product layer over the heated wall and mix the product layer material intensively. Therefore the volatile components evaporate continuously from the product layer with high evaporation rates. The hinged blades are designed with a minimum gap to prevent fouling of the heating surface by product, but are never in contact with the heated wall. The product enters the dryer at its top. The evaporation starts after heating to the boiling point. In the slurry zone first solids are formed and with advancing evaporation of the volatiles and continued shearing by the hinged blades the paste breaks up to powder. The final solid product is discharged by gravity at the bottom of the dryer via a suitable air lock.

Filmtruder and Viscon processors are specialized in the concentration, purification and devolatilization of products with viscosities up to 10,000 Pa (s) and are characterized by the following properties: Agitated thin film processing Unequaled surface renewal, resulting in the lowest residual volatile content Typically no stripping agents required Large free vapour volume compared to product hold-up, allowing very high volatile removal in one stage A successful thin film processing system consists of the right processor design integrated with properly engineered subsystems. SMS can provide a complete system, including installation and start-up services, or full engineering and design documentation to allow you to add the necessary subsystems for our thin film processor.

For the thermal separation of a mixture a thin film is produced at the heated wall of a cylindrical or conical evaporator. A distribution ring on the rotor distributes the liquid evenly across the periphery. Then, the blades fitted at the rotor spread the liquid as a thin film of min. 0.5 mm over the heat transfer surface. The model concept for the flow in the thin film evaporator assumes that prior to each rotor blade a bow wave is formed. In the gap between the rotor blade and the heating surface, fluid is supplied from the bow wave of a highly turbulent area with intense heat and mass transport. This results in a good heat transfer performance even with viscous products. In addition, the formation of deposits is avoided and the intensive mixing also protects temperature-sensitive products from overheating.

Most people are known plastic films to protect food in the household. The POLIFIBRA films GmbH manufactures and assembles polyester and laminated films, which are used because of specific character in different industrial manufacturing sectors. POLIFIBRA provides polyester films with different strongly adhering surfaces. In our product POLI BOND the surface of the PETP film on or treated on both sides in varying degrees. This can be a very significant improvement in the adhesion of coatings to be achieved. POLI BOND can in the film thicknesses 19µ - 350µ are delivered.Different printings require different surfaces. In addition to highly transparent or colored opaque base films we offer here at various coatings that allow easy and quick editing. Seal foils are coated films, the above-defined temperature ranges enable an activation of the coating so as to allow bonding of different products. POLIFIBRA films offers solutions for different temperature ranges and applications.

In the cable industry films are used particularly suitable for shielding electrical conductor, as a separating and insulating films or moisturizing protection. Thus, polyester films, because of their physical and chemical properties both in data and communication cables as well as power cables used. The high tensile strength, low weight per unit area, a high degree of flexibility and good electrical properties are important criteria for the selection of the film set in the cable production.The permanently constant physical and chemical values of the polyester films, as well as the tight tolerances in the film thicknesses allow the use of POLIFIBRA products even in very demanding end-products in data and power cable area. The polyester film is a transparent, flexible film with excellent mechanical properties. The electrical properties of polyester films are very good, so they come in the field of data and communication cable with a thickness of usually 12µ - 50µ for use.

Under prepreg is meant the reinforcing fibers that are already impregnated with resin. Upon heating, the resin liquefies briefly and steeped the fibers before it begins to harden. Prepregs offer especially for complex components high performance and a very wide range of application.

From POLIFIBRA processed as composite polyester films UL and IEC / CEI are tested. We laminate polyester films with one or more flexible materials. So can be made, for example composite films made of polyester, pressboard, fabrics, metal foils, fleece, Nomex *, etc. By the connection of different materials, the characteristics of the individual products can be significantly improved: greater tear and tensile strength higher tearing or tear propagation resistance Advanced heat resistance up to 180 ° C (class H) favorable conjunction with impregnating agents improved heat dissipation Avoid oxidation polyester better insulation Cost reduction in the production

POLIFIBRA assembled a wide range of insulating films that are based on polyester films. The polyester film usually is transparent, flexible and has a high mechanical strength. It is highly resistant to oil, grease and solvents and contains no plasticizers. Under normal operating conditions in the isolation area is polyester (Product: polyester film) aging. The electrical properties of the film are very good. Polyester film is used in practice in temperature ranges from -60 ° C to 150 ° C in many industrial applications. In the field of electrical insulation films are generally used in thicknesses 12μ to 350μ. The polyester film has excellent mechanical strength and has a high resistance to oil, grease and solvents in general good compatibility with impregnating agents on. Their electrical properties have been proven for many decades in the electrical industry. Although polyester in the thermal class B is classified, it can also allow for higher

Polyester films are usually transparent, flexible and have a high mechanical strength. Polibond is a polyester film with a special transparent matt surface. The chemical primer changes the surface structure of the polyester film and this enables greater adhesion to the surface. The strength of the adhesion can optionally be changed. Polibond has excellent anchorage values ​​for impregnating agents.

Heat Stabilizing films are polyester films, which do not shrink at heat treatment. They form the basis for the printing of electrical elements and are ideally suited for further processing. If you to have any further questions then please do not hesitate to contact us. We will be happy to explain what to look for heat stabilizing films and what qualities must have the films.

Production Process of laminated printed film roll A: Artwork confirmation B: Printing cylinders making C: Prepare raw material accordingly D: Printing E: Lamination F: Slitting or folding G: Bag making/cutting H: Final inspection J: Delivery Other information of laminated printed film roll A: We are specialized in making all kinds of packaging materials, such as food bags, coffee bags, zipper bags, ziplock bags, stand up pouches, black bottom bags, aluminium foil bags, pet food bags, tobacco bags, fruit packaging bags, vegetable packaging bags, paper bags, tin boxes, hole puncher for plastic bags. B: We do printing according to your design artwork, just send us layered design in AI or PDF or PSD format. C: The MOQ is 10,000 pcs, the more the cheaper D: Similar samples are available Disclaimer: All trademarks and pictures shown here are as example of our production capability, they are not for sale, and they are the property of their owners.