Results for
AAAGILER GMBH
Germany
1) Modified PVC coated fabric is suited for placing heavy materials within the working space, occasional drive-in or –out scenarios and pedestrian traffic 2) Chemical resistant and withstands long-term UV exposure— great for outdoor use 3) Patented Rigid-Lock integral stainless-steel wall-support system is 30 cm deep and locks at 90° for secure, leakproof containment 4) Single-piece construction – patented Rigid-Lock wall-support system integral to berm provides unobstructed work space 5) Quick and easy setup – no assembly required
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
FRP-HX - Highly viscous media Pneumatic drum mixer for highly viscous media. The FRP-HX is Geppert Rührtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the drums. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FRP-HX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Special solution for highly viscous liquids of up to 5,000 mPas. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (device group II, category 1-3).
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
FRP-LX - Lightweight mixer The pneumatic FRP-LX mixer series has been designed for easiest operation. Aluminum being the material of the housings and the adapters, it has a weight of only 6 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile agitator FRP-LX is by default equipped with a maintenance unit for the oiling of the pressurized air and mufflers. Additionally we can provide you with a vessel clamp applicable for open lid drums.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
FRP - Pneumatic drum mixer The FRP is Geppert Rührtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler. Additionally we can provide you with a vessel clamp applicable for open lid drums.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
FR-HX - Highly viscous media Electric drum mixer for highly viscous media. The FR-HX is Geppert Rührtechnik’s drum mixer for highly viscous media of up to 5,000 mPas. The foldable mixing elements with a diameter of 200 mm demand a non-vertical installation in the tank. This installation is realized due to a traverse with a welded 2”-socket. Additionally the traverse allows the use of the agitator when the drum is open. The mobile mixer FR-HX is by default equipped with an on-/off-switch with low voltage breaker and – upon request – with a connection cable. . The FR-HX could also be equipped with a frequency inverter upon request. Explosion-proof design after ATEX (2014/34/EU) for operation in ex-zones 0-2 for gases and zones 20-22 for dusts (Device group II, category 1-3).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEPPERT RÜHRTECHNIK GMBH
Germany
FR - Electric drum mixer The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
The FR series is a fast running electric drum mixer that can directly be mounted on 200 l steel drums with a 2“ bung hole. The mounting on the drum is done with a 2” threaded adapter with which the agitator is screwed into the bung hole. The agitator shaft is connected to the drive shaft by means of a sleeve coupling. Folding propellers are used as mixing elements, which can be inserted into the drum through the 2” bung hole when being folded. The FR series mobile mixer is delivered as a turn-key solution with an on-/off-switch with low voltage breaker and connection cable. Upon request, the FR series mixer can also be supplied with an integrated frequency inverter. Additionally we can provide you with a vessel clamp applicable for open lid drums.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
The FRP is Geppert Ruhrtechnik’s fast running pneumatic air mixer that can be directly mounted on 200 l steel drums with a 2“ bung hole. The FRP is mounted onto the drum with a 2” threaded adapter. The agitator is screwed into the bung hole. We do offer one drive especially adapted for low viscous media and one drive especially adapted for medium viscous media of up to 1,000 mPas. The agitator shaft is connected to a bearing shaft within the drum mixer housing by means of a sleeve coupling. This bearing shaft is connected to the drive shaft. Folding propellers are used as agitator elements, which can be inserted into the drum through the 2” bung hole when being folded. As a mobile mixer, the FRP can be delivered as a turn-key machine with a service kit for the lubrication of the compressed air and a noise muffler.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Lightweight electric mixer with direct screwing into 2“ bung hole. The FR-LX series mixer stands for easy handling. Aluminum being the material of the housings and the adapters, this is a lightweight solution with a total weight of only 10 kg. The agitator is screwed directly onto the on-top 2” bung hole of the tank thanks to either a 2”-steel or a 2”-fluoroware coupling. Therefore, this agitator can not only be screwed onto steel tanks but also onto plastic tanks with bung hole. The mobile mixer FR-LX is by default equipped with an on-/off-switch with low voltage breaker and connection cable. The FR-LX could also be equipped with a frequency inverter upon request. Additionally, we can supply your open lid drums with a traverse bridge or a vessel clamp.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
Fully automatic labelling machine for labelling drums in accordance with the GHS Directive. All chemicals are subject to mandatory classification and labelling before they are placed on the market, and they are often marketed in drums and hobbocks of various sizes. This places increased demands on the flexibility of the labelling unit in terms of print data, multi-colour printing and application height (labelling height). Often, several labels are applied to the circumference of the keg (product label, hazardous goods label(s) and logistics label. For this purpose, the system can be equipped with several label dispensers and/or several printing and dispensing systems. Labelling can be carried out in continuous operation or at a standstill. Depending on the application and labelling requirements, the labelling system can also be positioned at a drum labelling station.
Request for a quoteB+B AUTOMATIONS- UND STEUERUNGSTECHNIK GMBH
Germany
Fully automatic labelling machine for labelling drum pallets IBC Conatiner All chemicals are subject to mandatory classification and labelling before they are placed on the market. Often, several labels (product label, hazardous goods label and logistics label) are used up on the containers or drum pallets. Labelling can take place in a continuous flow or at a standstill. Vacuum belts are used for transferring labels to the drum, which can process different label sizes with the appropriate special vacuum plate. The IBLM labeller can be used as a stand-alone labeller or integrated into existing production lines and filling lines.
Request for a quoteResults for
Drumming - Import exportNumber of results
12 ProductsCountries
Company type