Results for
KAUP GMBH & CO KG
Germany
The extensive and many-sided drum clamp programme of KAUP encloses attachments which clamp, tip and turn single drums. Other attachments can carry up to four drums pre and side by side. The wide port folio is complemented by special solutions for the transport of special drums, by slip-on drum arms and drum tipping arms for already existing fork clamps.
Request for a quoteAXRO GMBH
Germany
Standard Capacity, up to 120.000 pages, Konica Minolta Bizhub C-Serie 258
Request for a quoteAXRO GMBH
Germany
Brother drum DR2300, Standard capacity with up to 12.000 pages - suitable for Brother HL-L-Serie (2300, 2300 D, 2340, 2340 DW, 2360 DN, 2360, 2365 DW, 2365, 2320 D, 2321 D), MFC-L-Serie (2700, 2700 DW, 2720 DW, 2720, 2740 DW, 2740, 2700 DN), DCP-L-Serie (2540, 2540 DN, 2520 DW, 2520, 2500, 2500 D, 2560 DW, 2560)
Request for a quoteRHODIUS ABRASIVES GMBH
Germany
Abrasive flap drum, for use with satin finishing machines. • Long lifetime through high-density fill • BW with slotted flaps for optimal workpiece adaptation
RHODIUS ABRASIVES GMBH
Germany
Non-woven cleaning drum, for use on satin finishing machines for the removal of paints and rust. • Open structure, thus no clogging • High grain concentration for great cleaning performance • Manufactured from rings, therefore markedly longer lifetime
RHODIUS ABRASIVES GMBH
Germany
Drum, for use with satin finishing machines. Fill: combination of abrasive cloth and non-woven material. • Strong material abrasion with simultaneous surface finish • Long lifetime through high-density fill • Open structure, thus less clogging
RHODIUS ABRASIVES GMBH
Germany
Non-woven disc drum, for use with satin finishing machines. • Consistent finishing • Long lifetime through high-density fill • Open structure, thus less clogging
RHODIUS ABRASIVES GMBH
Germany
Felt flap drum, for use with satin finishing machines. • High-quality wool felt • Long lifetime through high-density fill • FBW with slotted flaps for optimal workpiece adaptation
LUTZ PUMPEN GMBH
Germany
Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the withdrawal or decanting of caustic solutions. * Media examples: Sodium hydroxide, potassium hydroxide, ammonia water, formic acid and acetic acid, etc. * Pumping unit equipped with Lutz Original handwheel * suitable for filling or transferring oils such as rapeseed oil and vegetable oil Features & Advantages * optionally with electric or compressed air drive * no lubricants and therefore no contamination of the pumped medium by lubricants * optimized barrel emptying * universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump can be replaced
Request for a quoteFLUX-GERÄTE GMBH
Germany
The VISCOFLUX mobile S drum emptying system was specifically designed for use in pharmaceutical, food and cosmetics industries. It is perfectly suited for ensuring efficiency and process safety while pumping high viscosity, paste-like, non-self-flowing media out of diverse drums – either with or without aseptic bags. Media can be transferred low-shear and continously. The residual amount remaining in the drum is up to less than 1 %. The mobile drum emptying system offers a high degree of flexibility and can also be operated in wet or damp production environments. The system's stainless steel process device bears the protection class IP 66.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HSSD - Side Drum Heater is an easy and actual aid to the warming of steel barrels. It has got a higher efficiency than the Insulated Jacket HISD, but no thermal insulating function. For a very quick heating and higher temperatures up to three drum heaters can be used simultaneously for a 200-liter barrel. The Side Drum Heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can of course be made to measure, too. HSSD - Side Drum Heaters are suitable in particular to defrost frozen or other products, thus allowing to empty the barrels rapidly. Soaps, fats, varnishes and oily products can be melted as well, respectively reduced in their viscosity. In addition, the 200-liter element can be used in conjunction with the HBD Base Drum Heater to shorten the heating-up time further.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times and thus saves important resources. * Infinitely variable speed controller for the transfer and filling of small quantities * Sealless design (DL) conditionally safe to run dry * continuously adjustable * powerful Motor with improved service life * service-friendly and easy to dismantle * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.The max. delivery head also depends on the pump design, motor and fluid.
Request for a quoteFRIEDR. FREEK GMBH
Germany
We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery drum pump is suitable for low-viscosity, aqueous to slightly viscous media, such as plasticisers, cold cleaners and lubricants. The set is suitable for dispensing small containers such as canisters or hobbocks. The pump is flexible at all times and thus conserves important resources. The set is supplied without battery and charger. * Replaceable, powerful rechargeable battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge empties approx. 12 x 200 litre containers Features & benefits * BLDC motor with high efficiency up to 70% * Infinitely variable * Long battery life * Automatic switch-off in case of overload * Sophisticated quick-release fastener * The max. flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20° C. The measurement is taken at the pump's discharge nozzle, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. *Optional impeller or rotor shape * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70% * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B2 Battery Drum pump is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister or hobbocks. The pump is flexible at all times and thus saves important resources. * Replaceable, powerful battery with Li-Ion * Battery life 35 min at maximum speed * 1 battery charge emptied approx. 12 x 200 litre container Features & Advantages * BLDC Motor with high efficiency of up to 70 * continuously adjustable * long battery life * automatic shutdown on overload * sophisticated quick lock * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.
Request for a quoteLUTZ PUMPEN GMBH
Germany
The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable
Request for a quoteBÜRKLE GMBH
Germany
The storage area of the drum holder can be adjusted for height and provides a place for setting down the filling container directly under the discharge of drum pumps. This prevents the danger of the liquid splashing while being poured from a high height – for example if the filling container is standing on the floor. The user also has both hands free while dispensing and is able to remove larger quantities conveniently. A scale with container can also be placed on the storage area so the liquid that is being dispensed can be measured accurately. The holder can be used for Bürkle pumps with discharge tube or discharge hose. Discharge hoses can easily be inserted into the foldaway fastening. Can be used for plastic or stainless steel drums.
Request for a quoteFRIEDR. FREEK GMBH
Germany
The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification.
Request for a quoteFERRUM-MASCHINEN EIN BEREICH DER KMS AUTO UG (HAFTUNGSBESCHRÄNKT)
Germany
Oil drum grab for Ferrum DM yard loader / wheel loader requires 3rd control circuit On request for almost all FERRUM models Recommended for the models: Wheel loader Ferrum DM308 x4 V2 (conditional) Ferrum DM312 x4 Ferrum DM416 x4 V2 Ferrum DM522 x4 Ferrum DM430 x4 DLZ Ferrum DM625 x4 Ferrum DM732 x4 Court loader: Courtyard loader FIRST 12 Courtyard loader FIRST 16
Request for a quoteEUGEN LÄGLER GMBH
Germany
The first floor sanding machine developed by Eugen Lägler! Due to its ease of operation and maintenance, it has proven its value in the rental business, especially in the centrifugal sanding drum version. The ELF - which is constantly being improved in detail - can be acquired with either a conventional sanding drum or the modern LÄGLER® centrifugal sanding technology. The drum sanding machine convinces with its high performance and simple application. The integrated bracket facilitates the transport of the machine. Applications with the ELF: The ELF is the reliable drum sanding machine for working on small as well as on large areas. It is mainly used for sanding wooden floors. Nevertheless, it can also be used in conjunction with the IGEL milling drum for milling works, such as removing multiple layers of finish from planks. The version with centrifugal drum is very user-friendly. This makes the ELF also the ideal wooden floor sanding machine for the rental business.
Request for a quoteEUGEN LÄGLER GMBH
Germany
The lightweight and compact drum sanding machine! Ideal for smaller surfaces and popular in the rental business. Especially DIY enthusiasts like to rent the PROFIT, because it is easy to handle and transport. Based on proven LÄGLER® technology, the PROFIT with its centrifugal drum is also a good option for private users. The abrasive sleeve can be changed quickly and easily. Its compact design and the resulting manoeuvrability make it suitable for smaller areas. Despite its relatively low weight, the PROFIT achieves good work quality and an appealing sanding performance. Applications with the PROFIT: The PROFIT is mainly used for sanding of wooden floors. It shows its strengths especially in easier renovation works and the treatment of small and hard-to-access areas.
Request for a quoteIGUS® GMBH
Germany
Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s
Request for a quoteIFA TECHNOLOGY GMBH
Germany
We consider your individual requirements and build customised drum filling stations and drum emptying stations for you. Our portfolio comprises drum filling stations and drum emptying stations for various drum types. It ranges from manual to fully automated stations - depending on the system requirements. For this we consider the requirements of the German Water Resources Act (WHG) and the ATEX directive of the European Union. Thanks to the latest technology, IFA Technology filling stations are suitable for drums of different sizes and can be adapted for individual use.
Request for a quoteFLUX-GERÄTE GMBH
Germany
With the Drum pump F/FP 425 there is less than 0.05 l residual amount left in a 200 l drum, so maximum 0.02 %. The pump has an integrated backflow valve that is easy to close before taking the pump out of the container. Thus the backflow of the medium in the pump is prevented. This makes optimum use of especially expensive media possible and saves additional cleaning and disposal costs when handling problematic media. The pump is available in stainless steel, polypropylene and hastelloy C. In stainless steel and hastelloy C the pump F/FP 425 can also be used in hazardous areas. Benefits: - Optimal residual emptying with e.g. less than 0.05 l residual amount left in 200 l drum - Two adjusting levers to easily close the backflow stop - No tilting to totally empty the drum - Reduction of cleaning and waste disposal costs - No loss of medium when taking the pump from drum to drum - Optimal use of fluids
Request for a quoteResults for
Drumming - Import exportNumber of results
228 ProductsCountries
Category