Flame retardant construction materials - Import export

High performance low-e fabric A2 The climatic separation of building parts or the thermal separation between the outside of buildings and the interior is usually achieved by a thick layer of insulation. GLASS REFLECT offers a different approach: the high-performance low-e coatings on the energy-saving glass fabric reflect heat radiation almost completely. Depending on requirements, the energy-saving fabric can maintain the coolness of a room while keeping heat from outside at the same time Thermographic testing according to DIN EN 13187: A black body heater at 200 °C is directed onto the center of the back of the fabric. Result: The heat radiation is reflected by more than 96% ! The robust fabric is less than 0.5 mm thick. This thin architectural fabric offers significant advantages for installation and ensures the best rolling behavior even after tens of thousands of rolling cycles.

BLACKOUT A2 fabric is a special non-flammable blackout fabric for public buildings. There is a large selection of blackout fabrics for a wide variety of purposes. These fabrics all have one thing in common: they are usually flame-retardant, classified as B1 or M1, or have no flame-retardant properties at all. However, for use in public buildings with high visitor frequency, e.g. airports, train stations, museums, rail vehicles, cinemas, universities, schools, kindergartens, psychiatric institutions, hospitals, retirement homes or in other installation situations that require special fire protection, the classification "flame-retardant" is usually not sufficient. After extensive development, Stottrop-Textil has succeeded in offering a non-flammable blackout fabric . The certificate according to the new European standard EN 13501-1 was issued with the classification A2 -s2, d0 . The opaque fabric can therefore be used almost anywhere.

The technical textile that feels like soft fabric. TENT PES + B1 is the allrounder if a strong light weighted textile is needed. Its thin polyester threads not only create a high-grade fabric like look, but also keep it very soft and crease free. This attitudes comes together with his high tear strength. TENT PES + B1 can replace PVC textiles that are twice as heavy. Therefore, the transport of your object is much easier and cutting and sewing is no problem. With its fire resistance test according to European EN norm B1-s1, d0, without burning drops, it is permitted to be used in public indoor rooms in whole Europe. On its backside the fabric has a polyurethane coating, which enables the textile to a high water column and leads to good heat-sealing capabilities. The frontside has a water and dirt repellent coating. Air tight Light, approx. 205 g/m² Almost crease free Dirt repellent Waterproof, > 2000 mm customizable with the digital printing

The GLASS 320 WHITE fabric is a special material for the demanding applications of textile construction Translucent materials have become essential for modern architecture. With their outstanding properties, these membrane materials can be used in the field of architecture or sun sails/protection . Glass fabrics have a high mechanical load-bearing capacity , high tensile strength and, as they are not an organic substance, they do not rot . In addition to many technical specifications, the aim of GLASS 320 WHITE from the outset was to offer a fabric with a very high-quality, textile surface in a width of 320 cm . For use in public buildings with high footfall, e.g. airports, train stations, museums or in other installation situations that require special fire protection, it meets the requirement of non-flammability and is certified according to the new standard EN 13501-1 A2 -s1, d0.

Non-flammable light acoustic fabric for backlighting, as wall cladding or as a printing medium. The GLASS 300 KK + 2 light acoustic fabric with A2 certification combines many valuable properties in one product for the demanding application of textile construction. Acoustics is the study of sound and its propagation. The light acoustic fabric we have developed is able to significantly improve the acoustic perception of a room . The clear membrane coating of the A2 acoustic fabric on the high-quality textile surface ensures that plenty of daylight can enter the building. The fabric width of 320 cm gives the planner the opportunity to create large areas without seams . The A2 glass fabric is intended for use in public buildings with high visitor frequency, e.g. airports, train stations, museums or in other installation situations that require special fire protection. It meets the requirement of non-flammability and is certified according to the EN 13501-1 A2 -s1, d0 standard .

The use of lightweight textiles outdoors has always been a challenge. The demands on modern architecture are becoming ever greater. There is hardly a fireproof glass fabric , i.e. A2 classified, and if there is one, it is usually heavy and darkens the room. With the GLASS PREMIUM article we have developed an A2 certified membrane material that not only looks very high quality but also lets in a lot of natural light . Its coating is dirt-repellent and keeps unsightly algae/verdigris away. Glass materials not only provide a particularly high-quality appearance but also extremely high strength for membranes , for example . The fact that it is a fabric and not a tarpaulin is immediately apparent to the observer. The Stottrop GLASS PREMIUM fabric is a fireproof material that is suitable for outdoor use and also offers an intelligent shade solution .

Silicone -coated fabrics were among the first professional materials for industrial use and in textile architecture . The high flexibility and resistance to aging are good reasons for these materials. In the past, silicone fabrics were less successful due to their poor processing and often insufficient fire rating. The non- flammable GLASS SILICON A2 tarpaulin was chemically and physically redesigned from the ground up. This has enabled many problems of the past to be overcome. A real difference is that the non-flammable tarpaulin is now almost as resistant to bending . The glass fabric is almost as insensitiveas a tarpaulin ! This makes the material ideal for a wide range of applications in industry and architecture . The coating can be supplied in colour or transparent . The viewer sees a naturally diffuse light , especially in the transparent version . This makes the fabric suitable for lighting in buildings.

Non-flammable architectural fabrics often have a glass fabric carrier and are coated with various polymers. A major disadvantage of such materials is their sensitivity to creasing and rapid aging in outdoor areas. The GLASS SILICON A2 tarpaulin is completely different ; it has been chemically and physically redesigned from the ground up. A real difference to other architectural fabrics is that it is almost impossible to creasing . This makes the tarpaulin ideal for a wide range of applications in architecture and industry . The coating can be supplied in colour or transparent . The transparent version in particular allows the viewer to see a naturally diffused light . An absolute highlight is that the GLASS SILICON A2-AC material can be digitally printed . The fabric can also be sewn , welded or glued .

This glass fiber fabric or facade fabric is coated with a Teflon coating . The chemical term for Teflon is PTFE. The unique properties of Teflon are already known from many other applications , e.g. the incomparable dirt repellency and the high stability against environmental influences. Due to these properties, the PTFE MESH glass fabric is the perfect material for your building envelope . A facade concept with which building structures can be marketed much more attractively. In the textile PTFE MESH fabric, we combine very strong glass fibers to form a defined, non-flammable mesh and encapsulate the fibers with a special PTFE coating . These Teflon fabrics are stretched over frames that are hung in front of the building's facade . The hole size can be chosen so that it is easy to look through the facade from the inside of the building . From the outside, the building appears as a light and clear surface.

Architectural fabrics, light sails and acoustics up to 320 cm wide For the application areas of light sails and acoustic sails The architectural fabrics / light sails can be used in a variety of ways: Light ceilings / sound absorbers / low-e fabrics / theater and stage construction / digital printing / exhibition construction / museums / project-specific developments Sun protection technology combined with acoustic resonance surfaces For the roof area of ​​the new Munich football stadium, high demands were placed on the fabric supplied by Stottrop and on the fabric properties of the architectural fabric. The 36,000 m² of light sails are partially movable. The sun sails can be extended and retracted at the push of a button so that the grass gets enough sun and can grow when there is no play. The sun sails also improve the acoustics and thus the well-being of the spectators.

Save energy with Stottrop-Textil fabrics Saving and storing energy is essential for every company, both for its environmental impact and to save unnecessary heating or cooling costs . With the technical textiles from Stottrop-Textil there are many possibilities The materials can be used to improve the energy efficiency of buildings and halls without the need for complex insulation layers . Retrofitting without much effort is usually not a problem. The function is achieved by encapsulating the energy used . It doesn't matter whether you want to keep it cool , warm or hot . The fabric divides or separates the rooms into different temperature zones . Technically, convection/air exchange is prevented . In addition, the heat radiation is reflected . This means that the energy is reflected back to where it came from. A technical term for these materials is Low-e . Stottrop-Textil offers a range of light and heavy fabrics for many different purposes.

In many applications, objects must be moved or shifted to avoid unnecessary lifting . Pushing and sliding is easier than lifting. SLIPPY-TEX has low-friction surfaces on both sides that reduce frictional resistance to a minimum . This means that goods glide excellently over the fabric. Even heavy boxes or rolls glide easily on this thin polyester fabric . The fabric is very light and soft at 70 g/m² . This means that the slippery fabric can be easily applied to large and small surfaces such as wood, plastic or metal . Good to know! Its characteristic check structure ensures that the fabric tears less quickly in the event of minor damage. The areas of application are diverse: Transport slides Storage and relocation aids Material flow support and much more With Slippy-Tex your goods glide more easily! You can find more fabrics for industrial applications here .

The glass fabric of a new generation! Silicone coated fabrics were among the first professional materials for textile architecture and industrial use . The high flexibility and ageing resistance are good reasons for these materials. Silicone fabrics have not been able to gain much traction due to their poor processability and often insufficient fire rating. STRONG GLASS SILICON A2 has been completely redesigned chemically and physically. This has enabled many problems of the past to be overcome. STRONG GLASS SILICON A 2 contains an extremely stable fabric for particularly robust applications. In addition to the very high tensile strength of 4,100 and 6,500 N/5 cm, it impresses with its high puncture resistance . The fact that it is almost completely resistant to bending makes a real difference. The glass fabric is almost as resistant as a tarpaulin! This makes the material ideal for a wide range of applications in industry and architecture .

Dust protection fabric for the highest fire protection requirements PES-FR-UV (The lightweight) flame retardant B1 according to EU standard extremely light 70 g/m² printable dustproof high air and water tightness reusable Cost savings in disposal Width 150cm The Spinnaker fabric, which weighs just 70 g/m², is characterized by its very low mass combined with high air and water tightness . Due to the very low material weight , significant costs are saved on disposal . In addition to its light weight, the dust protection fabric is also characterized by its reusability . The material is approved as B1, flame retardant, according to the EU standard . The lightweight fabric is often used as an enclosure , tent or scaffold protection. Continue to the article. GLASS 320 WHITE (The all-rounder) non-flammable A2 according to EU standard 270 g/m² closed coating dustproof printable Width 320cm

In recent years the glass fiber fabric #124 has established itself worldwide as a reliable separation medium for bending , shaping and curving glass with the highest demands. Advantages of GLAS #124: high-quality glass fibre fabric no particle transfer from bending form to glass no marks on material reusable different fabric widths: 150 cm 200 cm You can find more fabrics for industrial use here.

Qualities Mission VOICE #124 for bending and curving glass GLASS REFLECT / Low-e thermal subdivision Dust covers Protection against dust Energy-saving fabric to save and store energy GLASS SILICON A2 fireproof tarpaulin STRONG GLASS SILICON A2 high-strength non-flammable tarpaulin SLIPPY-TEX low-friction gliding fabric Other products A2 Plans Blimps Air conditioning ducts Gas-tight fabrics Silicone coatings Construction and scaffolding cladding TPU coated fabrics Fabric with polyurethane coating TPU films for medicine, industry, sports Fireproof high temperature fabrics up to 1200 °C Fabrics coated with TPU on one or both sides Terry cloth articles / promotional items can be found at www.schenckingdirting.de

The MULTILAYER FILM is a unique multi-layer film which, at approx. 25 µm, is significantly thinner than comparable barrier films . MULTILAYER FILM has excellent barrier effects against: Chemicals War gases and helium Viruses atomic dust The outer layers consist of PA on one side and PE on the other . The latter can be sealed thermally or using an ultrasonic process. The film is 130 cm wide and can be changed in thickness or laminated with other media, such as textiles, if desired.

The flame-retardant spinnaker fabric There are only a few fabrics that can be used in such a wide variety of ways. We have been supplying flame-retardant spinnaker fabrics all over the world for 35 years. This has enabled us to learn a lot from our customers and to continually improve our product. Today, polyester ripstop fabric has many useful properties for a wide range of applications. P ES FR UV is: airtight light approx. 70g/m² dirt-repellent waterproof > 1,000 mm digital bedruckbar, UV-Solvent, Latex, Sublimation Can be sewn and welded (preferably with hot air) flame retardant, B1-s1, d0, according to EN 13501-1 available in many colors, including metallic silver and gold Good to know! Its characteristic check structure ensures that the flame-retardant spinnaker fabric tears less quickly in the event of minor damage.

Non-flammable glass fabric with certification including printing inks Both the fabric and the colors are non-flammable! It is now possible to install signs, logos, photos and advertisements that are non-flammable in public buildings with high visitor frequency , e.g. shopping centers, airports, train stations, museums, hospitals or in other installation situations that require special fire protection , such as escape routes . GLASS A2 PRIN T is certified as non-flammable according to the European standard EN 13501-1, A2-s1, d0 for two printing systems : Pigment printing using the inks: MULTIPLOT PG-5 KR Latex printing using the inks: HP Series CR331 to CR337 The fine structure of GLASS A2 PRINT not only looks like a fine fabric, but in combination with the matching coating, it also provides a pleasantly soft feel. One side is matt white and the other has a silky sheen . You choose which side you want to print on. GLASS A2 PRINT finds its applications in many areas!

The non-flammable wallpaper Fireproof wallpapers have become an integral part of interior decoration in public areas . The Stottrop A2 wallpaper is certified according to the EU standard EN 13501-1 including special inks . With the non-flammable photo wallpaper, there are no longer any limits to individual room designs in public areas . The high-quality material can be printed on both sides and attached to the wall with a standard wallpaper paste . Which printing systems are certified? Pigment printing using the inks: MULTIPLOT PG-5 KR Latex printing using the inks: HP Series CR331 to CR337 What does A2-s1,d0 mean? A2-s1, d0 materials are non-flammable and show hardly any smoke development and no burning droplets from the fabric. This high-quality wall covering has many applications: Whether as decoration, information sign or advertising space in bars, restaurants, hospitals, exhibition stands, hotels, psychiatric institutions, schools, kindergartens

Digitally printable glass fabric with the highest fire protection standards For use in public buildings with high visitor frequency , e.g. airports, train stations, museums or in other installation situations that require special fire protection, it meets the requirement of non-flammability and is certified according to the new standard EN 13501-1 A2 -s1, d0 . The special structure of GLAS DIGITA L not only looks like a fine material , but in combination with the coordinated coating ensures a pleasantly soft feel . The whitening that is problematic with glass fabrics almost no longer occurs here. As an A2 fabric, GLAS DIGITAL finds its applications in a wide range of areas: Backlight : For use with light, the one-sided coating was adapted to the challenges of LED technology. Regardless of whether natural light , fluorescent tubes or LED technology ; GLAS DIGITAL is a diffuser that ensures homogeneous light distribution , without any star effects (pinholes) .

Non-flammable for digital printing according to DIN 4102-A2 and EN 13501-1, A2-s1, d0 A high-quality digital print with the highest fire protection requirements. Glass fibre fabric in widths up to 320 cm GLAS DIGITAL non-flammable wallpaper GLASS A2 PRINT Coated and flame retardant according to DIN 4102-B1 and EN 13501-1, B-s1,dO B1-SPINNAKER PES-FR-UV TENT PES + B1 TENT 310 FR UV STRETCH 240 FR BLOCKOUT Textiles for backlighting and as projection surface, suitable for LED lighting Printing process: sublimation, dye-sublimation, solvent, UV, latex other Widths: 150 cm – 320 cm

For a wide range of applications, we offer solutions made from glass fibre fabrics that are flame-retardant, non-combustible or resistant to high temperatures up to 1200 °C . There are also special products made from synthetic fabrics with B1 . Glass fibre fabric is certified according to the following standards / building material classes: EN 13501-1, A1 EN 13501-1, A2-s1,d0 EN 13501-1, B-s1,d0 DIN 4102 – A2 DIN 4102 – B1 AbP ASTM E84-15a GB 8624-2012 Class 0

Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product

Composite sandwich panel on basalt and ceramic basis for the production of fire-resistant building constructions. CBG-SeaPan-OEM-50/60 offers completely new solutions for heat, sound and fire protection application. The use of lightweight composite materials makes it possible to reduce the total weight of a construction considerably. - 100% of natural origin, chemically neutral — corrosion resistant — non-flammable — non-combustible — resistant to humidity — antibacterial — recyclable — no smouldering — dimensionally stable

Multilayer refractory construction core based on rock wool and inorganic impregnation matrix for the production of fire-resistant building structures. ✓ 100% natural and inert ✓ non-flammable, according to IMO 2010 FTP Code Part 1, DIN EN 13501 ✓ meets the requirements of the RAL quality mark certification ✓ heat- and sound-insulating ✓ pressure resistant ✓ water-repellent ✓ dimensionally stable with temperature changes ✓ recyclable

Fire-resistant composite sandwich core panel on basalt and ceramic basis for the production of fire-resistant constructions and refractory building structures in the field of building construction and container construction, as well as comparable applications ✓ 100% natural and chemical neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reducevibration ✓ fire-resistant ✓ nonflammable ✓ recyclable

Contoured basalt-based fibred core to use as a fire-resistant and soundproofing material. Application areas — Fireproof panels for construction industry and engineering — Thermal insulation — Acoustic insulation Properties — non-combustible, in accordance with IMO 2010 code FTP part 1 — heat- and sound insulation — pressure-resistant — water-repellent — stable for temperature changes — recyclable

Fire-resistant composite sandwich panel based on basalt and ceramic. CBG SeaPan WP 25/15 offers completely new solutions to the manufacture of cabin walls and bulkheads in shipbuilding, residential and office containers in construction sphere. The use of lightweight composite materials (e.g. with only approx. 7.99 kg/m2 for a wall panel of fire class A-30) makes it possible to significantly reduce the total weight of a construction. ✓ 100% natural and chemically neutral ✓ antibacterial ✓ corrosion-resistant ✓ thermoresistant ✓ pressure-resistant ✓ water-repellent ✓ reduce vibration ✓ fire-resistant ✓ nonflammable ✓ recyclable