Epoxy coating - Import export

surface protection for concrete, crack filling, hydrophobic impregnation

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”.

INDIRECT (VIA STORAGE MEDIUM) OIL HEATER FAN IDS 900The IDS 900, our most powerful model of this series of mobile indirect oil heaters, provides the strongest mobile heating power The greatest model of the IDS series was especially designed for heating individual halls or several rooms and comes equipped with a flow-optimized stainless steel combustion chamber for a particularly high efficiency and with an exceptionally powerful axial fan. The compact construction comprises a robust, epoxy coated steel frame with double-walled housing for optimum soundproofing and insulation. Function related, the delivery of the oil heater fan IDS 900 does not include an integrated fuel container, which is why the use of an external tank is recommended for automated continuous heating. Optionally available is also an oil tank pedestal with a capacity of 208 litres.

M-150 Super Finish is a top quality formula containing extremely fine and uniform abrasives with outstanding polishing action for hand er high temperature machine polishing. Especially developed for polishing of polyrethane Iaquire and gel-coated or epoxy surfaces where a super finish is required. Also recommended for use on finished parts for a fast touch-up of imperfect er dull surfaces. M-150 has an extremely gentle cutting action to achieve the smoothest, high gloss finish possible, and requires therefore a good basis surface prior to application. lt is recommended to use OSKAR'S M-100 for the removal of deeper sanding marks er surface imperfections. Does not contain silicones or waxes.

Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.

Chemical resistant epoxy coating. Can be used as a primer and as a sealer. As a system product for the CP OS 8 car park deck coating, Maleki-EP 150 is a tested solution of class OS 8 in accordance with TR "Maintenance of concrete structures". Maleki-EP 150 stands for high-quality surface protection that meets the requirements of car parks and multi-storey car parks. Packaging unit: 6 kg combined container, 24 kg container (single) – Article-No.: 1809

Bookends, closed model. Made of 1 mm thick, epoxied, powder-coated steel. • Robust bookends made from powder-coated sheet steel

Metal umbrella stand with perforation. Capacity: 28.5 litres. • Metal umbrella stand with epoxy resin coating • With decorative perforated strip • Ideal for entrance areas, offices, shops or the home • Capacity: 28.5 litres

Round, steel waste basket with 30 mm wide perforation ring. Capacity: 15 litres. • Round waste paper basket • Capacity: 15 litres • Made from scratch-proof, epoxy resin-coated steel • With a 30 mm wide decorative ring of perforations • Suitable for use in offices, hotels and other prestigious spaces

Lockable metal wall ashtray. Easy to attach and empty. Capacity: 4 litres. • Metal wall ashtray with epoxy resin coating • With removable inner container • Lockable container (including 2 keys) • Easy to empty and clean • Ideal solution for safe, efficient disposal of cigarette waste • Suitable for use in roofed outdoor areas • Easy wall-mounting • Capacity: 4 litres

The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position

Black epoxy coated neodymium magnet is widely used for a lot of applications, mostly in different motors. Also, it will be your best solution if you need to use magnets outdoors or in a humid environment. Black epoxy coating is regarded as the most corrosion resistant coating option of neodymium magnets, this coating gives magnets a flat and black finish. It is a protective material made from epoxybased resin, it can provide Neodymium magnets with outstanding resistance to corrosive chemicals, heat, and ultraviolet light. The main features of black epoxy coating are 1) Nonporous, water and chemical resistant; 2) Extremely impact resistant (contains a form of nylon); 3) Colored black, to prevent visual inspection; 4) Affords high security, once cured, extremely difficult to remove; 5) Nonconductive, an electrical insulator; 6) Low toxicity; 7) Easy and simple to mix; 8) Long pot life; 9) Can be cured in one hour at 65°C (150°F); 10) RoHS compliant.

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SMBT-47 (Screw-in version; Cap Ø 47 mm / 1.85 in) ▪ SMBB-47 (Bayonet version; Cap Ø 47 mm / 1.85 in) ▪ SMBT-80 (Screw-in version; Cap Ø 80 mm / 3.15 in) ▪ SMBB-80 (Bayonet version; Cap Ø 80 mm / 3.15 in) ▪ SMBP-80 (Push-on version; Cap Ø 80 mm / 3.15 in) Materials ▪ Breather cap made of Steel, zinc/nickel-plated (Fe/Zn Ni 6) and free of hexavalent chromium CrVI (standard option); chrome-plated and epoxy-coated versions available ▪ Bayonet flange made of Steel, zinc-plated ▪ Basket made of Steel, zinc-plated or Polyamide (PA) ▪ Dipstick adaptor made of Polyamide (PA) ▪ Sealings made of Cork (for filler breathers without pressurisation) or NBR (Buna-N®) (for pressurised filler breathers) ▪ Metal basket ▪ Plastic basket ▪ Pressurisation up to 0,7 bar / 10 PSI ▪ Air filter element ▪ Locking feature ▪ Dipstick...

industrial floor with high abrasion resistance, surface protection system

Riga Ply Birch plywood sanded on both the faces. Birch plywood has a wide range of application. Plywood is composed of 1.4 mm thick veneers by cross bonding. Riga Ply is the basis for all other types of plywood products. Grades B (I) - for high quality painting, staining and lacquering. S (II) - for good quality painting, staining and lacquering. BB (III) - standard grade (plugged), for interior paint finish and coating with transparent and non-transparent thicker overlays and films, and also veneering. WGE - plywood of WG grade without open defects (repaired with epoxy filler), for coating with non-transparent finishing material. WG (IV) - for use where surface appearance is not important, reverse grade. Advantages Environmentally friendly, durable, easily workable. Applications Riga Ply has a wide range of application for interior and exterior use: building and construction, transport, packaging, furniture, joinery, sports equipment, children toys and other applications. Sizes 1220 mm x 2440 / 3050 mm 1250 mm x 2500 / 3000 mm 1500 mm x 2500 / 3000 mm 1525 mm x 2400 / 3050 / 3660 mm 2150 mm x 3050 / 3340 / 3850 mm 2500 mm x 1250 mm Long grain birch plywood panels with the length up to 2500 mm are also available. Cut-to-size panels and machining available in accordance with the customers' requirements. Thicknesses 4, 6.5, 9, 12, 15, 18, 21, 24, 27, 30, 35, 40, 45, 50 mm.

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Electrical operated Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy-coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Electric acting Pressure discharge One-sided Voltage 400V 3AC (24V DC, 230V AC on request) Pressure range Please refer to the table Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge bidirectional Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic double acting Pressure discharge One-sided Pilot pressure 6bar (lower pressure on request) Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Lever Steel, lacquered Pressure discharge bidirectional Pressure range Please refer to the table Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Lever Steel, lacquered Pressure discharge One-sided Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Hand wheel Steel, lacquered Pressure discharge bidirectional Stem Not rising Pressure range Please refer to the data sheet Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Hand wheel Steel, lacquered Pressure discharge One-sided, two-sided on request Stem Not rising Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 2 parts to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquids, drain water, sludge, food etc. (viscous media, pulverised media with fibre particles, plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 9 and 11! Body GG-25 (grey cast iron), epoxy coated 120 … 180µm (heattreatment 190°C, 20min) Sealing • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (AISI 304) Stem Stainless steel 1.4305 (AISI 304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge bidirectional Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the table Temperature range • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

Technical data Design Center body consists of 1 part to be mounted between two flanges according to EN 1092-1 type 11 form B – PN10 (former DIN 2501). ANSI 150 on request. Media Liquid and pulverised media with fibre particles, viscous media, drain water, sludge, food etc. (plastic granulates, sand or similar media on request). Not suitable for steam. Refer to the advices on page 8! Body GG-25 (grey cast iron), epoxy coated (heattreatment 190°C, 20min) Sealing • Metal/metal • NBR • EPDM (FKM or PTFE on request) Gland 3-piece sealing set: • 1x GFO®-Faser – TWARON® edge reinforced • 1x O-ring (NBR or EPDM or FKM) • 1x synthetic fiber, PTFE-lubricated Knife Stainless steel 1.4301 (304) Stem Stainless steel 1.4305 (304) Function Pneumatic single acting with spring return, normally closed (NC). Pressure discharge One-sided Pilot pressure 6bar Pilot Media Filtered and dried, slightly oiled air according to ISO 8573 (please refer to the data sheet) Pressure range Please refer to the data sheet Temperature range • metal: on request • NBR: -25°C … +90°C • EPDM: -35°C … +120°C Attention: Temperature range not for all media. Face to face EN 558-1 Row 20 Installation Only with vertical upwards actuator The above information is intended for guidance only and the company reserves the right to change any data herein without prior notice! TWARON® is a registered trademark of Teijin Aramid

1500 - 19000 CFM / 2,500 to 33,000 m³/hr Nash's 2BE3 & 2BE4 vacuum pump series offers capacities ranging from 1,500 to 19,000 CFM (2,500 to 33,000 m³/hr). Designed to operate in demanding environments like the paper, power, mining and chemical process industries, these pumps offer durability and reliability at a low cost of operation. Each model is equipped with an application-proven polyisoprene-lined body for added corrosion & erosion resistance. The unique inlet configuration allows for both top and side inlet arrangements to accommodate low headroom installations. In installations where space is limited, the top discharge capability of the 2BE4 allows the use of a top mounted discharge separator that saves floor space and eliminates the need for a trench. The pumps allow efficient operation over the entire vacuum range without the need to change the pump's internals. When equipped with a center shroud, split vacuum operation up to 12 in. Hg (400 millibar) differential can be achieved. Large inspection ports allow easy access to pump internals for inspection and maintenance. For more aggressive applications, stainless steel, stainless steel clad and epoxy coated components are available.