Epoxy coating - Import export

surface protection for concrete, crack filling, hydrophobic impregnation

Metal fibre burners for new or existing epoxy powder coating installations Metal fibre burners and infra-red emitters for a more efficient, flexible and compact powder coating installation. POWDER COATING APPLICATIONS Choose the metal fibre burner right from the design stage: Pre/post-treatment, Paint drying, Teflon or ceramic coating, Continuous coating... IMPROVE YOUR FACILITIES The powder coating process: Preparing the substrate: cleaning, pre-heating Application of paint Gelling Polymerisation: hardening paint

Submerged self-aspirating aerator for wastewater treatment in municipal and industrial applications. Ideal for the Aeration of shallow and medium depth sewage treatment plant tanks. Suitable for buer basins, aeration tanks, aerated lagoons and SBR reactors. Size ranges from 4kW to 37 kW. IP68 Robust motor in epoxy coated cast iron, equipped with temperature control probe Motor specifically adapted for operating submerged and at high-speed in accordance with europelec stan- dards AISI-304 or AISI-316 stainless steel frame specially designed to optimise performance Discharge channels distributing the airflow to optimize aeration and mixing

Submersible degreasing aerator The AEROSPEED is a submersible degreasing aerator that produces microbubbles which in turn causes grease to float onto the liquid surface. The unit is easy and simple to operate and install. Robust IP68 cast iron motor, coated with epoxy and equipped with a temperature control sensor Motor specially adapted to the constraints of operating a submerged degreasing aerator according to Europelec standards Stainless steel suction tube Stainless steel frame specially designed to optimize the hydraulic flow Stainless steel propeller specifically designed to ensure simultaneous mixing and suction of air.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

NTC temperature sensors coated with epoxy resin have a very low temperature tolerance classification and a wide measuring range of -40…+150 °C.

thermosetting Nomex® prepreg, one or both sides coated with epoxy resin.

Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”.

INDIRECT (VIA STORAGE MEDIUM) OIL HEATER FAN IDS 900The IDS 900, our most powerful model of this series of mobile indirect oil heaters, provides the strongest mobile heating power The greatest model of the IDS series was especially designed for heating individual halls or several rooms and comes equipped with a flow-optimized stainless steel combustion chamber for a particularly high efficiency and with an exceptionally powerful axial fan. The compact construction comprises a robust, epoxy coated steel frame with double-walled housing for optimum soundproofing and insulation. Function related, the delivery of the oil heater fan IDS 900 does not include an integrated fuel container, which is why the use of an external tank is recommended for automated continuous heating. Optionally available is also an oil tank pedestal with a capacity of 208 litres.

Vicura MC31 (2phenyl2imidazoline) is an offwhite powder which has C9H10N2 as chemical formula. It can be used as a crosslinker for highly reactive epoxy powder coatings, accelerator for dicyandiamide, epoxy/polyester hybrids and epoxy phenolic powder coatings. 2phenyl2imidazoline is also known as 2Phenyl4,5dihydro1Himidazole and 4,5Dihydro2phenyl1Himidazole. Availability Europe and United States Provided Vicura MC31 is on stock in our local warehouses our lead time is about one week if delivered in 25 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details.

LIFT WINCH STACKER WITH AUTOMATIC CLUTCH MOD. ARG W 181 Practical and functional allows to lift loads of 180 kg up to a maximum of 2450 mm. The exclusive hand winch can lift the load with minimal effort and, through the built-in automatic clutch, you can stop to any point in the ascent lifting. The descent of the load is only possible if the operator acts on the winch and intentionally causes its gradual descent.Equipped with strands of rope fiber core, push handles horizontal system of brake pedal, aluminum and epoxy powder coating oven-dried. Painting RED - BLUE - YELLOW according to availability.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). The height of the bed from the floor is 28 cm. In this way, it is easy to clean under the bed.

M-150 Super Finish is a top quality formula containing extremely fine and uniform abrasives with outstanding polishing action for hand er high temperature machine polishing. Especially developed for polishing of polyrethane Iaquire and gel-coated or epoxy surfaces where a super finish is required. Also recommended for use on finished parts for a fast touch-up of imperfect er dull surfaces. M-150 has an extremely gentle cutting action to achieve the smoothest, high gloss finish possible, and requires therefore a good basis surface prior to application. lt is recommended to use OSKAR'S M-100 for the removal of deeper sanding marks er surface imperfections. Does not contain silicones or waxes.

Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.

SHELVES WITH TANKS LIQUID WASTE SERIES FPB801/802 Modular system consists of a structure in tubular steel, a collection tank and a floor grid support. The tubular structure is available in versions for single or double barrel and it is stackable, making it possible to safely store up to 4 drums. Containers of liquid pollutants must be stored safely, in particular to prevent any contamination of aquifers. The collection tanks are watertight, coated with epoxy powders and the support surface is grilled galvanized. Warning: prices are valid for the individual modules to be combined.

Catonium ETPI (Ethyltriphenylphosphonium Iodide) is a white to offwhite crystalline powder, its chemical formula is C20H20P. ETPI is a quaternary phosphonium salt mainly used for the advancement and / or curing of phenolic based epoxy resins and thermosetting powder coatings. It can also be used in organic synthesis as a wittig reagent and as a phase transfer catalyst in the production of fluoroelastomers . This material is highly soluble in water and polarizable solvents. Ethyltriphnylphosphonium Iodide is also known as ETPI, ETPPI and TPEPI. Compared to amines, imidazoles and quaternary ammonium salts CatOnium ETPI features considerable better latency and thermal stability. Further it offers a low odor, minimal color formation and controlled reactivity. It decreases or eliminates side reactions and creates longer, straighter chain epoxy molecules which have a sharp molecular weight distribution. Availability Europe and United States Provided CatOnium ETPI is on stock in our local

Catonium BTPB (Butyltriphenylphosphonium Bromide) is a white to offwhite powder, its chemical formula is C22H24BrP. BTPB is a quaternary phosphonium salt mainly used in organic synthesis as a wittig reagent and as a phase transfer catalyst in the production of fluoroelastomers, Epoxy Resins and Powder Coatings. This material is highly soluble in water and polarizable solvents. Butyltriphenylphosphonium Bromide is also known as BTPB, BTPPB and TPBPBr. Compared to amines, imidazoles and quaternary ammonium salts CatOnium BTPB features considerable better latency and thermal stability. Further it offers a low odor, minimal color formation and controlled reactivity. Availability Europe and United States Provided CatOnium BTPB is on stock in our local warehouses our lead time is about one week if delivered in 25 KG fiber drums. Canada, South America, South Africa and other markets can also be served, please contact our sales department for more details.

The curing mechanism between Vicura MC68 (Pyromellitic Acid Diphenyl Imidazoline Salt) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC68. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC68 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 8,0 – 10,0 % of Vicura MC68 are recommended as good starting points. Also available with added calcium carbonate (Vicura MC68L) Availability Europe Vicura MC68 is on stock in our local warehouses. Our lead time is about one week if delivered in 20 KG carton boxes.

Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) is an offwhite powder with the following chemical formula C10H6O8.2C9H10N2 The curing mechanism between Vicura MC55 (Pyrromelletic Acid Diphenyl Imidazoline Salt 12) and the epoxy resin is complex. Two parallel processes are taking place; direct reaction between the imidazoline and the epoxy group and homopolymerization of the epoxy resin that is catalyzed by Vicura MC 55. Compared to most of the powder coating systems where the optimal ratio between the crosslinker and the binder is close to the stoichiometric one, in the case of Vicura MC55 the optimal ratio is generally determined empirically. For epoxy resins that are typically used for powder coatings (epoxy equivalent weights between 700 – 1000) amounts of 6,0 – 9,0 % of Vicura MC31 are recommended as good starting. Benzene1,2,4,5tetracarboxylic acid, compound with 4,5dihydro2phenyl1Himidazole (12)

A micronized grade of dicyandiamide containing 1.5%1.6% antiblocking agent to inhibit clumping and improve handling. It is used as curing agent for epoxy resins. Due to its high melting point Vicura DICY 100S does not melt during extrusion to produce a homogeneous mixture with the epoxy resin on a molecular scale. Therefore Vicura DICY 100S is supplied with low particle size assuring in this way acceptable homogeneity during the extrusion step, provided the premixing process is done properly. Outstanding features of epoxy powder coatings cured with Vicura DICY100S include excellent adhesion to metal, excellent chemical and solvent resistance, very high impact, abrasion and scratchy resistance, and dielectric properties that make them suitable for many electrical applications. Availability Europe and United States Provided Vicuta DICY 100S is on stock in our local warehouses our lead time is about one week if delivered in 20 KG carton boxes.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). Headboard and footboard are upholstered in quilted fabric.

Our products are manufactured in accordance with TSE and CE EN747 EN 74712012+A1 standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). The height of the bed from the floor is 28 cm.

Our products are manufactured in TSE and CE standards. Our bunk bed is produced from CRST 12 quality 1 mm thick metal profiles. The product is electrostatic powder coated with epoxy and polyester resin so that it can be used without abrasion fading and rusting. Our bunk bed is completely disassembled thanks to the special allen screw system. With this special allen screw disassembly system, the durability of the bunk bed increases, does not shake, does not squeak, does not make noise, and does not experience negativities such as screw rubbing. There are 10 iron profile slats on each floor as bunk bed under bed platform. With its high carrying capacity, children, young people, adults, all age groups can use it. It can be used separately as a single bed. It offers practical solutions for places with limited living spaces (young children's rooms, dormitory). The height of the bed from the floor is 28 cm. In this way, it is easy to clean under the bed.