Results for
RAFI ELTEC GMBH
Germany
RAFI Eltec is a technical services provider that develops and produces electronic assemblies and systems according to customer-specific requirements – from the idea to the finished product. At RAFI Eltec, we test the quality of our products across all manufacturing processes. By performing individual tests and integrating fully automatic tests in combined assembly and testing lines, we achieve targeted and effective test cost reductions. For this purpose, we insist on the most cutting-edge technologies and high-quality equipment. Testing technologies - Pull test for chip-on-board - Automatic optical inspection - Flying probe - In-circuit test - Boundary scan test - Function test - Burn-in test and run-in test - Temperature shock test - Temperature humidity test You can rely on support from the right contact partner for you – whether you are approaching us for the first time or during the production process. We expertly answer all your questions.
Request for a quoteIGUS® GMBH
Germany
Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request Other information Series 210 Inner height hi: 21 mm Inner widths Bi: 30 - 120 mm bending radii R: 38 - 200 mm Pitch: 30.5 mm The E4.21 series is identical to 210 series and replaces it. E4.21 - E-Chain® with crossbars at every link Series 220 Inner height hi: 28 mm Inner widths Bi: 40 - 300 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain® with crossbars at every link Series 280 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every link Series 380 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every link Series 400 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every link Series 600 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 640 Inner height hi: 112 mm Inner widths Bi: 87 - 562 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every link Series 290 Inner height hi: 32 mm Inner widths Bi: 50 - 400 mm bending radii R: 63 - 300 mm Pitch: 56 mm E-Chain® with crossbars at every other link Series 390 Inner height hi: 42 mm Inner widths Bi: 50 - 400 mm bending radii R: 75 - 350 mm Pitch: 67 mm E-Chain® with crossbars at every other link Series 410 Inner height hi: 56 mm Inner widths Bi: 50 - 600 mm bending radii R: 135 - 500 mm Pitch: 91 mm E-Chain® with crossbars at every other link Series 601 Inner height hi: 108 mm Inner widths Bi: 200 - 600 mm bending radii R: 200 - 1000 mm Pitch: 143 mm E-Chain® with crossbars at every other link Series R760 Inner height hi: 28 mm Inner widths Bi: 50 - 300 mm bending radii R: 63 - 250 mm Pitch: 46 mm E-Tube, swivel lid Series R770 Inner height hi: 32 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 300 mm Pitch: 56 mm E-Tube, swivel lid Series R780 Inner height hi: 42 mm Inner widths Bi: 50 - 300 mm bending radii R: 125 - 350 mm Pitch: 67 mm E-Tube, swivel lid Series R880 Inner height hi: 56 mm Inner widths Bi: 75 - 462 mm bending radii R: 150 - 500 mm Pitch: 91 mm E-Tube, swivel lid Series R608 Inner height hi: 108 mm Inner widths Bi: 200 - 500 mm bending radii R: 250 - 1000 mm Pitch: 143 mm E-Tube, swivel lid Assembly tool for E4-series For the practical opening and closing of the E4 series. Big savings in assembly time Assembly tool for E4-series E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining, separating and opening of the E-Chain® and E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. System E4/00 E4/00-E-Chain® with 4-piece structure The low-noise E4 chain Further noise reduction with sound dampers (E4/101 series) Wide application range Numerous interior separation options Large accessory kits Widths up to 2000 mm through extension links Snap-open along both sides Max. travel distance: Over 200 m Typical industrial sectors and applications Robotics and handling systems Materials-Handling Technology Refrigeration engineering Construction machinery Machine tools Wood working Any type of machines Semiconductor Clean room applications cold storage houses Welding machines Maritime applications General mechanical engineering etc. IPA certificate: Clean room ISO class 3 (DIN 14644-1) at v = 1 m/s for Series 280.10.100.0 tested ESD classification: Electrically conductive ESD/Atex versions on request
Request for a quoteMERECS ENGINEERING GMBH
Germany
EOL test stand for e-charging columns and their power electronics for the simulation of different electrical loads and mains fluctuations. The test stand has automatic contacting and achieves high test throughputs in end-of-line operation. Different variants of the power electronics of electric charging columns can be tested. On the software side, Merecs Engineering relies on NI-LabVIEW and NI-TestStand.
Request for a quotePOPPE + POTTHOFF MASCHINENBAU GMBH
Germany
The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve (depending on the expansion volume) Impulse intensifier for small volumes up to 2,000bar Safety test chamber with automatic door Media treatment with dirt and clean tank
Request for a quoteMERECS ENGINEERING GMBH
Germany
We develop electrical test systems based on NI-PXI or NI-cRIO that can take on real-time capable measurement and control tasks. In addition, we can provide the FPGAs that can be used on the NI systems and the real-time operating system with software individually tailored to customer requirements.
Request for a quotePRÜFREX INNOVATIVE POWER PRODUCTS GMBH
Germany
Alongside the standard ICT/FCT process, we can also target every individual production stage for verification, as requested. Efficient inspection strategies and final functional tests are a fixed component of our quality management system. This electrical test process is ideal for testing smaller numbers of units, such as for pre-production, prototype or pilot series. The rapid test creation process allows, among other things, flexible reaction to product changes. Flying probe tests can be rapidly set up and are cost-efficient.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® Load, Testing and Special Resistors are used to test generators and emergency generating sets to test battery capacity as dummy load when testing circuit breakers to discharge capacitors for starting, controlling and breaking of electric drives CSN® Load, Testing and Special Resistors are characterized by technically mature and proven design for operations both indoors and outdoors optimal design to suit all current values and load cycles reliable control of all operating voltages even in most adverse service environments longterm stability highly reliable technology CSN® Load, Testing and Special Resistors are designed and manufactured individually to customer requirements and specific application.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years
Request for a quoteSTÄHLE GMBH
Germany
LowCost version of Standard robot system SMC2000 for computer controlled driving of motor cycles (2-wheeler) on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as - exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Optimization of consumption and exhaust gas parameters demands extremely high.
STÄHLE GMBH
Germany
Standard robot system for computer controlled driving of motor cycles (2-wheeler) and 3-wheelers (motorcycle style) on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as - exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Optimization of consumption and exhaust gas parameters demands extremel
STÄHLE GMBH
Germany
High dynamic robot system with extended actuator force ranges in special variant TRUCK for computer controlled driving of trucks, busses and light commercial vehicles on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as - exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Optimization of cons
STÄHLE GMBH
Germany
High dynamic robot system for computer controlled driving of passenger cars and light commercial vehicles on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -10°C to +50°C. Optimization of consumption and exhaust gas parameters demands extremely high...
STÄHLE GMBH
Germany
LowCost variant of the Sap2000 as robot system for computer controlled driving of passenger cars and light commercial vehicles on test stands. High grade of repeatability allows the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. Upgrades to higher Speed control Levels are possible. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Quick installation of the driving..
STÄHLE GMBH
Germany
Standard robot system in special variant TRUCK for computer controlled driving of trucks, busses and light commercial vehicles on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests will be accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Optimization of consumption and exhaust gas parameters demands
STÄHLE GMBH
Germany
Standard robot system for computer controlled driving of passenger cars and light commercial vehicles on test stands. Humanlike drive style and highest grade of repeatability allow the use for emission tests, mileage accumulation, climate tests, etc. Different levels of systems, actuator configurations and integration interfaces are available. STÄHLE AUTOPILOTS are employed throughout the world for testing of vehicles, vehicle components, fuels and lubricants, etc. on roll test beds. Fields for application such as - exhaust emission tests - fuel economy tests - running losses tests - mileage accumulation & durability tests - climatic tests - transmission & power train tests - acoustic tests - correlation measurements - R & D studies - Hybrid and electrical vehicle tests are accomplished by robots with an extreme degree of reproducibility in temperatures ranging from -40°C to +80°C. Optimization of consumption and exhaust gas parameters demands extremely high reproducibi
PRÜFREX INNOVATIVE POWER PRODUCTS GMBH
Germany
An experienced, in-house team of test and analysis specialists stands for the peak of quality – product-specific and exactly as you, the customer, desire it. To ensure quality in serial manufacture early on and guarantee a frictionless start of production, test equipment is incorporated into manufacturing processes and automated production lines. Placement tests, checking the electrical and software functionality, launch tests – depending on your individual requirements and your component, we will develop a test strategy and tune the tests to fit with each other. Our comprehensive test development methodology accelerates processes running all the way to the delivery of your product and reduced testing costs.
Request for a quoteWEINLICH GMBH & CO. KG
Germany
MPW Modular with air-cooled eddy-current brake, particularly for testing smaller electric motors smaller slowly running 1-cylinder engines drive units of e.g. two-wheelers. Essentially, three different types of construction may be distinguished: 1. MPW Modular for combustion engines and electric motors (primarily 1-cylinder combustion engines) 2. MPW Modular for foot-mounted electric motors 3. MPW F for flange-mounted electric motors Special designs, e.g. for foot- as well as flange-mounted electric motors may be offered on request. MPW engine test beds are available in four sizes with different load-carrying capacities (0,5 ... 40 kW).
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LLOYD DYNAMOWERKE GMBH
Germany
From the project planning stage through to the end of their operating life we offer a range of concepts for economical and fault-free operation of your machines Target-oriented maintenance intervals to match the respective operating conditions Online and offline status monitoring Trend measurements relating to wear behaviour of the mechanical and electrical components Stocking spare parts for shorter downtimes Training for maintenance staff 24 hour service Company-oriented maintenance contracts Modernisation of the machine, controllers and protection equipment Environmentally compatible recyclingTesting of electrical machines and systems, type tests, system tests, heat run tests according to DIN standards Dynamic balancing or rotors Cleaning and oven drying of large machine parts such as stators or rotors VPI impregnation with rotating hardening process in drying oven VPI impregnation of transformers and large coils VPI or resin-rich coil production Manufacture of tooth-wound coils
Request for a quoteWHITE STEEL GMBH
Germany
DESCRIPTION High stability on high capacity. Usually used for mayonnaise, ketchup, dairy product, milk and more… Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Permanently mixing Substances in a liquid Capacity from 16 to 16000 gph Compact design It is A3 certified and is electrically pre=disposed for ULCSA Pretested for quality control and stress test Manual Electric control panel 3 steps treatment for more product stability during subsequent treatments and storage Available certification up on your request UL, CE, GMP, FDA, ASME. Available documents up on your request I.Q (Installation qualification), O.Q Operational qualification), P.Q Performance qualification.
Request for a quoteSIM AUTOMATION GMBH
Germany
Small parts in large quantities? Electrical engineering in particular requires very quick machines. Electrical engineering is also becoming increasingly important in IT, with particularly small components required here. The machines from SIM Automation GmbH can detect even the smallest deviations of mere millimeters during sorting. We have produced assembly and testing lines for the following components in electrical engineering (extract): - Instrument components - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines: - Plug contacts (vehicle electrical systems) - Industrial sockets and switches - Sockets / light switches - Electric heater control valves - Electric razors - Electric toothbrushes Testing and inspection: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)
Request for a quoteSIM AUTOMATION GMBH
Germany
- Quality control and safeguarding - Individual test values and criteria - Customer-specific measuring and testing plants - Single measuring systems with manual assembly - Fully integrated and automated testing plants using robots - Optical, acoustic or electrical systems with/ without parts contact, data preparation, analysis Measuring and testing systems we were involved in: - Camera systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input 380 - 500 V; 3 AC (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 No inrush current Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature
Request for a quoteTEST GMBH
Germany
TesT Force transducers comply with the best technologies available. They incorporate our long experience as well as our customer's preferences and requirements for precise and robust devices for various applications. TesT Force transducers are particularly characterized by precision, quality, robustness, durability and convenient handling. On demand we also provide specially-designed force transducers with other dimensions and measuring ranges. TesT delivers all electrical force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data and automatically calibrate with them. Thus, these electronic units operate with dozens of different sensors so that a complex recalibration is not required.
Request for a quoteTEST GMBH
Germany
TesT electrical torque transducers are available as static reaction sensors and with rotary axle for dynamic applications. The requirements of our customers to precise, durable devices for industrial applications are fulfilled. They are easy to handle, from high quality and long life span. Other dimensions, measuring ranges and executions are available on request. TesT delivers all electric force and torque transducers with TEDS chips (TEDS = Transducer Electronic Data Sheet nach IEEE 1451.4). The electronic units of the model 813 and the TesTController 850-USB may recognize sensors equipped with TEDS chips, read their properties and calibration data, and automatically calibrate them. Thus, these electronic units operate with dozens of different sensors, so that a complex recalibration is not required.
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input AC 100-240V, Active-PFC wide range For use in switch cabinets (TS35-rail acc. to EN60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input AC 100 – 240 V (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) No inrush current Floating relay contact Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input AC 100 - 240 V (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) No inrush current Floating relay contact Digital-I/O, Analog-IN (0 - 10 V or 4 - 20mA) Interface: RS-232
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input 380 - 500 V; 3 AC (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) No inrush current Floating relay contact, Digital-I/O, Analog-IN (0 - 10 V or 4 - 20 mA) Interface: RS-232 Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature
Request for a quoteDEUTRONIC ELEKTRONIK GMBH
Germany
Rack mounting power supply, primary switched, remote controllable Input AC 100 - 240 V (wide range), Active-PFC For use in switch cabinets (TS35-rail acc. to EN 60715) Electrical safety / test report: IEC 60950-1, EN 60950-1, UL 60950-1, CSA 22.2 No. 60950-1, UL 508, IEC 62103, EN 50178 etc. EMC: EN 55011 Class B, EN 61000-3-2, EN 61000-6-2, EN 61204-3 No inrush current Floating relay contact Digital-I/O, Analog-IN (0 - 10 V or 4 - 20mA) Interface: RS-232 Very low stand-by-power, high efficiency (smooth behaviour across total input voltage range) Extensive protection for power output: short circuit, no-load, overvoltage, overtemperature
Request for a quoteResults for
Electrical testing - Import exportNumber of results
37 ProductsCountries
Category