Electric - Import export

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.* Media examples: Hydrochloric acid, battery acid, iron-III-chloride, phosphoric acid, chromic acid and citric acid etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting oils such as rapeseed oil and vegetable oil Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearings * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Drum pump is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents, optionally available with Ex-plug. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Highly resistant noble carbon shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * Approved according to ATEX directive 2014/34/EU, category ½

The Pump Set is suitable for thin, flammable and inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents. * Optionally available with Ex - plug * Pump tube equipped with Lutz original hand wheel * Suitable for Drum emptying alternative fuels, oils, flammable liquids Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimised Drum emptying with a remaining quantity of approx. 0.1 litres * No leakage if the pumping station is tilted or moved * Maximum product utilization with reduced drum cleaning and disposal rates * Approved according to ATEX directive 2014/34/EU, category 1/2

The electric pump set is suitable for low to high viscosity media in the food & pharmaceutical sector and is perfect for dispensing or transferring foodstuffs. * Pump tube equipped with Lutz Original handwheel Features & advantages * optionally with electric or compressed air drive * lubricant-free: therefore no contamination of the pumped medium * facilitated and accelerated emptying processes * universally resistant ETFE shaft bearing * easy disassembly: maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The CUSTOMline hot melt machine is the top solution for customized casting requirements. It is configured specifically according to customer requirements and can handle complex casting tasks with exceptional precision and efficiency. This machine is ideal for special applications where standard solutions are not sufficient. With the CUSTOMline you get a casting machine that is tailored precisely to the specific needs of your production process in order to achieve optimal results. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesives, hot melt packaging, hot melt adhesives, special machines for adhesive processing, hot melts, machines for gluing, machine for gluing, melt casting technology with hot melt, hot melt coating, gluing machines, special machines for casting, sealing, foaming, gluing, special packaging machines]

The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)

The GEMÜ 498 PTFE seated butterfly valve is motorized. Various metal or plastic on/off or control actuators are available. Disc and shaft are one-piece, body and seat are available in different designs. The butterfly valve is available in nominal sizes DN 40 - 900 (1½? - 36?) and in wafer and lugged body versions. —Suitable for isolating and control functions with gaseous and liquid media —Seal material TFM™ (FDA 21CRF 177.1550) —Installation length acc. to ISO 5752/20, EN 558-1/20, JIS 10K

Energy storage systems (ESS) are an essential part for modern, environmental-friendly and energy-efficient ship propulsion systems. By using different ship operating modes, the energy balance can be significantly improved and thus, the fuel consumption and the emission volume can be reduced or in case of fully electric systems, emission can be even completely avoided. By using an energy storage system, the combustion engines operate mainly within the optimum speed and load range and this reduces the maintenance costs. Furthermore, the redundancy of electrical and common propulsion drives minimises immensely the blackout risk. In the field of energy storage, the battery storages belong to the most common and most efficient storage systems. Safe and reliable energy storage due to PBES CellCoolTM Liquid Cooling Maximum power and performance due to high performance XALT Lithium-ion cells (3C rate) Modular cell exchange concept (CellSwapTM) ensures easy renewing of old cells

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

flexible surface protection for concrete walls and floors

Muscular and skeletal problems are the most common reasons for people being unable to work, particularly if they have a job that frequently involves physically strenuous activity like pushing and pulling loads. The electric drive systems of the Blickle ErgoMove® series reduce these health risks considerably. The effort required for pulling and pushing is reduced by up to 100 %. The physical strain on the operator is decreased during internal material transport due to the considerably lower amount of effort required compared with manual operation. Equipment and transport units of any kind can be quickly and easily upgraded with a “plug & play” electric drive, steering and braking assistance. The modular sets include two fixed castors with electric drive, cockpit solutions with integrated controls and battery unit as well as all relevant safety features.

This installation includes cable duct construction, cable laying, connection of the control cabinet, components and drives, and grounding in accordance with regulations.

Since the invention of the “Schniewindt grid” in 1902, we produce high voltage resistors and are thus among the pioneers in the electrical industry. Due to continuous development of our products and new developments according to the respective needs of the market, we are now one of the leading manufacturers of electric heating equipment, resistance equipment and sensors for current and voltage measurement

chainflex® CF Air pneumatic hoses were tested in e-chains® for over several million bending cycles. Their outstanding features include flexibility, high abrasion resistance and very good resistance to oil and coolants. -For extremely heavy-duty applications -PU/PE hose -Oil- and coolant-resistant -Abrasion-resistant -Outside-toleranced -PVC and halogen-free

chainflex® special cables are cables for special applications such as hanging applications, for use in rail vehicles or thermal and compensation cables. Use our comprehensive knowledge about cable plus the experience of 2 billion test cycles that are annually realized in the company-owned chainflex® laboratory. The steadily growing product range of the chainflex® special cables is based on the requirements of our customers. igus® also manufactures cables for special applications and uses a wide range of materials and manufacturing processes. Depending on the design, customer-specific special products can be made from lengths of 500 m. We look forward to hear about your job definition!

-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes

- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA

The “casing” sector for the electro and electronics industry was developed as a result of demand from the lighting industry for transformer housing for NV lights. Here we can emphasise our housings for electronic mounting devices. Individual customer requirements can be realized cost-efficiently by using insert adapters. Other products for the electrical industry are connectors, strain relief and cable fastening.

Find the suitable motor for your application: simply enter your requirements and receive suitable suggestions.

The new direct-current motors with worm gear enable quiet and economically efficient operation with drylin® lead screw units. The worm wheel has a spline to which the drive pin of the linear unit is connected. As a result, a motor flange and coupling are unnecessary and, this taken in conjunction with the motor adapter angled by 90°, the structure of the linear module is very compact. Thanks to the integrated magnetic rotary encoder (2-channel hall), the new DC motors are suitable for positioning. - Space-saving and compact design - Easy to fit - Quiet operation - Rotary position encoder included - Suitable for: SLW-BB, SAW, ZLW

When combined with the appropriate gearbox, drylin® linear axes with the new BLDC motors achieve higher speed and greater torque. Energy is used more efficiently, as a result of which EC/BLDC motors are more durable and have a longer service life. Due to the fact that carbon brushes are not used, brushless motors are almost completely wear-resistant, generate less heat and enable longer, uninterrupted operation. The EC/BLDC motors have the same connections as NEMA 17/23/24/34 stepper motors. - Brushless motors enable higher speed and greater torque - Longer operating time and service life - Virtually wear-free - Less heat generated - for all drylin® linear modules and axes with NEMA17/23/24/34 hole pattern

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

Strain relief from igus® is specifically developed for use in e-chains® and dynamic applications. Thecombination of polymer strain relief components and chainflex® cable materials offers maximum holding force and very high service life for the cables. For a wide variety of applications, igus® offers the best solution with respect to cost and benefits; from the CFXL strain relief for long travels in harsh environments, or the new CFU honeycomb strain relief for fast assembly to the CFN chainfix nuggets for simple and inexpensive strain relief. igus® chainfix strain relief components have been successfully used in thousands of applications around the world for years.

readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.