Results for
EM-TECHNIK GMBH
Germany
The electrical fine control valve makes it possible to adjust volume flows precisely via an input signal (4-20 mA) and to approach an exact spindle position. The valve can also be controlled by a 24V continuous voltage. Position feedback is implemented by a 4-20 mA output signal. With an additional adapter, the valve can also be connected via an RS-232 interface to a computer. The valves are available in 1/4" (10-200 l/h of water) and 1/2" (50-500 l/h of water).
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
A flow valve is a critical component in various systems where the regulation of fluid flow is necessary. It’s designed to control the rate at which fluid passes through a system, ensuring that the flow matches the requirements of the application.Flow control valves are essential in industrial usage, hydraulic systems, and pneumatic systems. They play a crucial role in regulating the flow of fluids, ensuring optimal performance and efficient operation of machinery and equipment. Control valves can be actuated in various ways, including pneumatically, hydraulically, or with electric motors. Some valves, known as automatic control valves, do not require an external power source and operate solely on fluid pressure.When selecting a flow control valve, it’s important to consider factors such as flow rate and pressure requirements, material compatibility, and environmental conditions.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The VY solenoid valves are robust, reliable and can be installed in a variety of ways. Installation in-line, on the wall, on modules, as a battery or directly on cylinders is possible without any problems. Available sizes between 1/8, 1/4 and 1/2 in 3/2, 5/2 and 5/3.
Request for a quoteKAMAT GMBH & CO. KG
Germany
KAMAT foot valves and foot switches are products of the highest technical quality. They are designed for opening and closing the water supply to high pressure blasting equipment. This valve can be used to open and close the water supply to a high pressure blasting unit. The water is supplied by a high pressure hose connected to the foot valve. When the pedal of the valve is depressed, the valve opens. When the pedal is released, the valve closes and the water is discharged through the bypass without pressure. The foot valve and high pressure pump can also be connected via an electrical switch. If the pump has a suitable control, the pressure generation is switched on or off mechanically when the valve is actuated. The KAMAT foot valve has been designed and constructed in accordance with the rules of technology and applicable standards and guidelines.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Our 15 mm valve series type VA. Valves controlled electrically and pneumatically, completely in aluminium. Available as a single valve or on modular manifolds for maximum flexibility. Core items: Reduced dimensions (15mm) Low power consumption (1 W) Modern design and compactness, for easy installation. Insensitive to pollution. Solid metal construction to ensure long runtime even in demanding environments Flexibility: The valve can be easily wall mounted, manifold mounted and multipolar connection units 3 different connection types LED display manual override Connection strips with exclusive modular system
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Our 15 mm valve series type VB as flange valve for battery assembly. Valves controlled electrically and pneumatically, completely in aluminium. Technical properties like our VA series.
Request for a quoteSCHUBERT & SALZER CONTROL SYSTEMS GMBH
Germany
Electrically controlled pilot valves for direct mounting on pneumatic valve actuators.
Request for a quoteKAMAT GMBH & CO. KG
Germany
For special applications, individual high-pressure systems are required, which KAMAT can provide from the initial project idea to the turnkey installation, with 100% of the production taking place in-house. This also applies to electric high-pressure pumping units. Depending on the application, our customers can choose between different drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation equipment. Even the electrical units supplied on the base frame are fully operational and can be used directly by the customer. Electric units have the advantage of emission-free operation at extremely low noise levels. ATEX certified high pressure electric units can also be used in ATEX hazardous areas.
Request for a quoteKAMAT GMBH & CO. KG
Germany
Versatile, turnkey diesel high-pressure pumping units Special applications require customised high-pressure systems, which KAMAT can provide from the initial project idea through to turnkey installation, with 100% of the manufacture taking place in-house. Depending on the application, our customers can choose from a range of drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation. However, the units are ready for use on the base frame on which they are delivered. KAMAT diesel-powered units are traditionally used in industrial cleaning and pressure testing, mining and water hydraulics, but special solutions for special fluids or to meet explosion protection requirements are also part of the KAMAT range. It makes no difference whether the customer requires a mobile or stationary unit.
Request for a quoteKAMAT GMBH & CO. KG
Germany
Multi-consumer valves distribute the output of the high-pressure pump evenly or as required to several high-pressure blasting tools. KAMAT offers two valves for this purpose: the mobile dual consumer control and the MVS4 multi-consumer control. When the consumer is opened, both controls open the valve and when the consumer is closed, the valve is closed. When all valves are closed, the controls switch off the pressure generation. The dual-user control is used to control one or two high-pressure consumers, such as high-pressure guns. The dual-user control is available with pneumatically or electrically controlled valves. The consumer and the high-pressure plunger pump have a corresponding control option. The dual consumer control and the consumer are connected by an electrical switch.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 10 mm width, three different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 10 mm width, three different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way proportional valves, 15 mm width, two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
2/2 way Proportional Valve Type 68P with 15 mm width and two different electrical connection possibilities. The steady valve opening allows a continuous adjustment of the flow. This proportional behaviour between control input and flow follows the valves unique characteristic curve and can be regulated with appropriate sensors and electronics for high precision.
Request for a quoteNOVOTECHNIK MESSWERTAUFNEHMER OHG
Germany
Application: E-gas, idle speed control The information detected from the pedal sensor are transmitted to the electric motor-driven throttle valve positionier via control and correction electronics. The current throttle valve position is measured by an integrated or adapted angle sensor. The idle controller regulates independent of the load the idling speed or the engine through the throttle position. This leads to an optimised fuel consumption. Automotive Applications.pdf For more information please contact: automotive@novotechnik.de, +49 711 4489-222
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 52 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. —Good cleanability —The solenoid can be replaced without removing the valve body from the pipeline —Hermetic separation between medium and operator
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 202 directly controlled 2/2-way solenoid valve has a completely plastic encapsulated coil. The armature is sealed by a bellows made of PTFE backed by an additional safety diaphragm. The valve body is available in various materials and with a straight through or angle valve body design. Good cleanability The solenoid can be replaced without removing the valve body from the piping Hermetic separation between medium and actuator Connection types: Solvent cement socket \ Threaded connection Connection standards: DIN \ ISO Body materials: PVC-U, grey \ PVDF Conformities: EAC \ UL
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. An integral optical and electrical position indicator is standard. — Linear or modified equal-percentage control characteristics — High flow rates — Force and speed are variably adjustable — Extensive diagnostic facilities — Operable via web interface eSy-Web — Integral optical position indicator and LED high visibility display — Standard gland packing suitable for vacuum up to 20 mbar (abs.)
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 0326 directly controlled 3/2-way pilot solenoid valve is designed for mounting to a compact aluminium rail as a valve battery for mounting in control cabinets or as a valve manifold near the pneumatic components to be controlled. The body is made of plastic. The coil is plastic encapsulated. -Robust design -Coil easy to replace -Option: integrated LED (M12 version) -Modular battery mounting
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Fluid analysis is a crucial component of any oil management program. Early detection of potential problems can prevent costly repairs and downtime. The LasPaC II makes it possible to detect the ISO Cleanness levels of the hydraulic media. The LasPaC II is available in three different versions. ▪ Compact and Convenient ▪ Twin-laser, 100% Coverage ▪ Integrated Clock ▪ Adaptable - Software Updates ▪ Electric operated flush valve ▪ option of adding an integral moisture / temperature sensor Power Supply ▪ Voltage range: 110 ... 240 V, AC 12 ... 24 V DC ▪ European, UK and US power plug adaptors included Pressure / Viscosity ▪ Pressure range: 2 ... 400 bar / 29 ... 5801 PSI ▪ Viscosity range up to 400 cSt Calibration ▪ ISO Medium Test Dust (MTD) acc. to ISO 11 171:1999 ▪ Analysis range: ISO 8-24, ISO 4406 Code, NAS 1638 Code 2-12, SAE AS 4059 Code 2-12 Laser Sensors ▪ High accuracy laser: 4 ... 6 μm(c) ▪ Standard accuracy laser: 6 ... 68 μm(c) ▪ Measured channels: 4, 6, 14, 21, 25, 38,...
Request for a quoteEM-TECHNIK GMBH
Germany
The 6R ball valve, equipped with our compact electrical part-turn actuator, is the ideal solution for space-saving assembling thanks to its reduced dimensions. It is designed for long-term use.
Request for a quoteSIM AUTOMATION GMBH
Germany
Small parts in large quantities? Electrical engineering in particular requires very quick machines. Electrical engineering is also becoming increasingly important in IT, with particularly small components required here. The machines from SIM Automation GmbH can detect even the smallest deviations of mere millimeters during sorting. We have produced assembly and testing lines for the following components in electrical engineering (extract): - Instrument components - Step motors and servo motors - Quick-release clutch systems - Gearbox balance shafts (for checking run-out accuracy and backlash) Assembly lines: - Plug contacts (vehicle electrical systems) - Industrial sockets and switches - Sockets / light switches - Electric heater control valves - Electric razors - Electric toothbrushes Testing and inspection: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles)
Request for a quoteHPM TECHNOLOGIE GMBH
Germany
Application possibilities and advantages of the TCJ series If you use a fluid or fluids up to a viscosity of max. 100 mm²/s at 20 °C (except for substances containing paint, resin and glue), then our self-priming systems of the TCJ series are just the right thing for you. The advantage of our TCJ system is that it reduces and prevents dirt ingress into your process. Our 10- and 25-litre systems are adapted to commercially available fluid containers. This allows the container to be directly changed — without cumbersome refilling. The result is no dirt in the container and thus a process that continues to function optimally. Connection possibilities for up to six spray heads. Container available in 2,5 to 20 Liter Optional Level control Control via 24 V DC electrical valves as standard. Pneumatic and other electrical valve voltages on request.
Request for a quoteMÜLLER CO-AX GMBH
Germany
The 3/2way solenoid valves are electrically operated solenoid valves with three connections and two switching positions. These valves are hermetically sealed on the outside and have proven themselves when used with liquid, gaseous, dirty, or poisonous (toxic) media. Even if the seals are completely worn out, no process medium can escape.
Request for a quoteGLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.
Request for a quoteResults for
Electric valves - Import exportNumber of results
28 ProductsCountries
Category