Dusts - Import export

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

The paper dust filter bag has been produced by us for over 35 years for industrial and commercial cleaning. For cleaning e.g. offices, schools and similarly used rooms, it is still a cost-effective and environmentally conscious choice. Paper double layer, filter bags with dirt flap, plastic connection or sliding closure, paper dust filter bags also in set with motor protection filter

Our MiniPleat products are pleated on inhouse designed pleating machines and feature exceptional strength, efficiency, dust holding capacity and low air flow resistance. We offer our MiniPleats in several pleat heights and tested according to various standards (EN779, ISO16890, Ashrae 52.2). Our MiniPleats, utilized in panel filters, are deployed in a variety of applications where technical reliability and a long service life is a must.

Keeping power tools clean and working hard Maximize efficiency of your power tools with POREX® dust canisters. Keeping the user and work environment free from hazardous dust discharge, our filters can be cleaned and reused for maximum life and cost effectiveness. Specifically designed for power tools, our dust canisters: Reduce costs – Easy-to-clean canister can be reused. Improve safety – Keep user and environment free of hazardous dust discharge by capturing dust and particulates. Offer long-lasting, durable structure to maximize tool life. Features Capture dust and particulate from power tool operation Cleanable and reusable Long lasting, durable construction Materials Offered Advanced porous materials – PE Formats Available 3D molded shape Request Sample ask an engineer

Keeping power tools clean and working hard Maximize efficiency of your power tools with POREX® dust canisters. Keeping the user and work environment free from hazardous dust discharge, our filters can be cleaned and reused for maximum life and cost effectiveness. Specifically designed for power tools, our dust canisters: Reduce costs – Easy-to-clean canister can be reused. Improve safety – Keep user and environment free of hazardous dust discharge by capturing dust and particulates. Offer long-lasting, durable structure to maximize tool life. Features Capture dust and particulate from power tool operation Cleanable and reusable Long lasting, durable construction Materials Offered Advanced porous materials – PE Formats Available 3D molded shape Request Sample ask an engineer

Keeping power tools clean and working hard Maximize efficiency of your power tools with POREX® dust canisters. Keeping the user and work environment free from hazardous dust discharge, our filters can be cleaned and reused for maximum life and cost effectiveness. Specifically designed for power tools, our dust canisters: Reduce costs – Easy-to-clean canister can be reused. Improve safety – Keep user and environment free of hazardous dust discharge by capturing dust and particulates. Offer long-lasting, durable structure to maximize tool life. Features Capture dust and particulate from power tool operation Cleanable and reusable Long lasting, durable construction Materials Offered Advanced porous materials – PE Formats Available 3D molded shape Request Sample ask an engineer

Keeping power tools clean and working hard Maximize efficiency of your power tools with POREX® dust canisters. Keeping the user and work environment free from hazardous dust discharge, our filters can be cleaned and reused for maximum life and cost effectiveness. Specifically designed for power tools, our dust canisters: Reduce costs – Easy-to-clean canister can be reused. Improve safety – Keep user and environment free of hazardous dust discharge by capturing dust and particulates. Offer long-lasting, durable structure to maximize tool life. Features Capture dust and particulate from power tool operation Cleanable and reusable Long lasting, durable construction Materials Offered Advanced porous materials – PE Formats Available 3D molded shape Request Sample ask an engineer

Keeping power tools clean and working hard Maximize efficiency of your power tools with POREX® dust canisters. Keeping the user and work environment free from hazardous dust discharge, our filters can be cleaned and reused for maximum life and cost effectiveness. Specifically designed for power tools, our dust canisters: Reduce costs – Easy-to-clean canister can be reused. Improve safety – Keep user and environment free of hazardous dust discharge by capturing dust and particulates. Offer long-lasting, durable structure to maximize tool life. Features Capture dust and particulate from power tool operation Cleanable and reusable Long lasting, durable construction Materials Offered Advanced porous materials – PE Formats Available 3D molded shape Request Sample ask an engineer

The synthesis dust filter bag has been a very high quality option for commercial cleaning for more than 10 years. The non-woven material is very robust, so that e.g. stones, light moisture and fine dust can be absorbed. In addition, dust retention values, separation efficiencies and durability have been improved. For these reasons, the Synthese dust filter bag is also increasingly used for light cleaning jobs. Synthese 3, 4 or 5 ply, filter bags with dirt flap, sliding closure or plastic connection, Synthese dust filter bags also in set with motor protection filter, household filter bags

Incremental magnetic measuring heads offer maximum precision over the full range of measurements. As a result of the magnetic operating principle and the robust mechanical construction, they are insensitive to soiling and are therefore ideally suited to use in production facilities. Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development etc.). Typical applications include: —Monitoring both slow and fast movements between machine parts —Measurements of position and positional changes in components and structural foundations, of servo regulators, valve and robot controllers —Measurement of growth, and so on The incremental displacement sensors are based on a magnetic principle: consisting of a magnetic scale and a multi-slot reading head that responds to changes in magnetic flux, they detect linear movements with high precision and resolution.

PAPR blower that incorporates technologies to make it smaller and lighter than previous models and provide a long battery operation time

BPAfree TRITAN water bottle Nonslip SILICONE grip Easy drinking with specially designed lid and mouth structure Protective lid protects the drinking area from dust 100% leak proof with twist lid system Easy drinking with fixable lid Onehanded use Odor Can be washed in the dishwasher. Resistant to impacts and breaks thanks to TRITAN material Carrying rope made for easy transportation Provides easy grip and transportation thanks to its ergonomic structure Specially designed nonslip areas on the covers Environmentally friendly with longlasting use Clear and smooth surface like glass with TRITAN material

For cleaning and care of all plastic surfaces in the car interior. Reliably prevents electrostatic charges, has a dust-repellent effect and protects against re-soiling. Leaves a pleasant, fresh scent. Other sizes available on request

The nano rim cleaner with a citrus scent is suitable for all steel and aluminum rims and reliably removes tire and brake dust, as well as tar and road dirt. Other sizes available on request

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

To ensure that your anchorage devices are securely installed in a concrete surface or masonry, the bore holes should be carefully cleaned prior to using special adhesive. This dust pump is designed to quickly remove any dust or residual particles that might cause problems from the bore holes. High capacity Air chamber length: 42 cm

ISO CoarseISO ePM10 / G4M5 pleated, progressivelystructured filter media thermallybonded, synthetic nonwoven (polyester) hotmelt pleating system synthetic FIBERPLAST frame standard installation depths 20, 25, 47, 92 mm special design with different frame geometries simple handling optimum resistance performance through hotmelt pleating system low pressure drop moistureproof fully combustible

synthetic filter media or filter media with irregular layer of coarse glass fibres individual pads or filter rolls available small installation depth low acquisition costs

Operating principle The AGGLOControl scrubber does an excellent job separating the smallest particles and aerosols. This dust collector is suitable for removing fine particles down to grain sizes of less than 3 μm. This makes the AGGLO scrubber from WesselUmwelttechnik predestined for use in various industrial contexts. Exhaust gases and exhaust air of various types are filtered efficiently and, above all, costeffectively, and raw gas is freed from dust. Clean gas is released into the atmosphere that has been purified of over 95 % of particles from 1 μm in size. With the AGGLOControl scrubber, the higher the dust density, the more efficient the separation of the contaminants. The AGGLOControl scrubber from WesselUmwelttechnik scores with its compact and spacesaving design, which can be accommodated on any industrial site.

Operating principle With this type of scrubber, coarser solid particles and fibres are filtered out of the exhaust air. The DLP (Dust Low Pressure) scrubber from WesselUmwelttechnik has a number of advantages. In addition to a long operating period, this wet dust collector system scores with a constant separation performance. Wessel uses only highquality materials to manufacture scrubbers. This results in a high chemical resistance. Thanks to automatic monitoring of the process parameters during operation, the highest possible operational reliability is guaranteed. The system reacts automatically to changes in the inlet conditions. All in all, the DLP wet scrubber is easily operable due to the practiceoptimised control system. The power consumption is comparatively low due to low pressure losses. Typical areas of application The DLP scrubber is used, among other things, in connection with the Wessel BIOCAT scrubber, which is used for biological exhaust air cleaning.

In many incineration and industrial plants of various sectors as well as in the municipal sector, dust emissions are produced during production processes. These emissions must be purified before they are released into the atmosphere The resulting dusts can be sticky, wet, dry or combustible and have different particle sizes. Often industrial dusts are between 0.1 and 1000 μm in size and vary greatly in composition. They are also present in various concentrations and combinations with other pollutants. Compared to dry separators, wet scrubbers have the great advantage that fires or explosive mixtures cannot occur. Depending on the industry and area of application, such as in incineration plants, wet separators are indispensable.

In many incineration and industrial plants in various industries as well as in the municipal sector, dust emissions are produced during production processes. These emissions must be purified before they are released into the atmosphere. The dusts can be sticky, greasy, wet, dry or combustible and have different particle sizes. In general, they are between 0,1 and 1000 μm in size. Dust collection systems physically filter these dusts out of the exhaust air. WesselUmwelttechnik specialises in various methods of exhaust air cleaning, including industrial dust collector systems, to safely comply with legal requirements, e.g. the German TA Luft. In addition to dry filtering, the product range includes wet separators. This way, even humid and hot exhaust air as well as agglomerating dusts can be treated by the Wessel systems. The various exhaust air purification technologies allow the use of dust collecting systems in a wide variety of industries.

HELIO®Clean 2 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 2-stage dedusting system. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. The separated dust content is sucked out into an external collection bin. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

HELIO®Clean 3 is a combined conveying-/ mixing-/ and dedusting device for virgin material and regrind. The dust is removed through a 3-stage dedusting system with ionisized air. The compact design makes it ideal for mounting on the feed zone of the processing machine or on a drying container. Available in 1- or 2-component version, filling is carried out by the integrated compressed air conveying technology with Venturi suction lance(s). Dedusting capacity up to 25 kg/h. Quality: Dust in granules causes lowered mechanical properties of technical plastic resins, leads to problems with surface finish in case of transparent parts, to high rate of rejects basing on smudges or white/black dots in transparent injection moulding parts like for example optical lenses of PC and PMMA. Professional cleaning of resins brings the quality to the original state again and optically perfect parts can be produced.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our product portfolio for cleaning with ionized air you will discover systems and products for many industrial sectors. Ion blower technology is characterized by much higher ionization power and a larger ionization range. Ion blower pistols shine in manual applications with a fixed installation of the ion blower nozzles and ion blower nozzle carriers. The compact design and high efficiency enable a wide range of applications. Electrostatic charges occurring during production processes often cause severe disruptions, reducing production speed and product quality. The R55 ion blower head and the PR55 ion blower pistol are both components of the newly developed discharging system with ultimate depth effect; the blower head for fixed installation and the blower pistol for manual and mobile use.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Compared to similar products, the ion blowing technology features longer ionization range as well as ionization performance that is many times higher. While the ion blower nozzles and the ion blower nozzle carrier are permanent installations, the ion blower pistols show their strengths in hand-operated use. All ion blowers discharge and remove dust from highly sensitive components. The emission tips enveloped by the airflow generate a discharge cloud enriched with ions.

Electrostatics disturb almost all production processes. Eltex systems prevent uncontrolled discharges and integrate electrostatics precisely into your processes. In our electrostatic discharge product portfolio, you will discover systems and products for many industrial sectors. Ion blowing devices for discharge and dust removal from highly sensitive components. Emission peaks enveloped by the air stream create an ion-dense discharge cloud. Available as a flat jet / round jet / spot jet or compact flat jet nozzle, as a pistol or as the LR36 nozzle carrier.

The MIXACO discharge stations are used for dust free emptying of the product into the further processing step (e.g. dosing system into an extruder). The container is fixed in place when moved into the discharge station. Two different executions are available: Type Guide fork Type Platform Differentiated by the way of feeding the container. Type Guide fork The movable container is pushed by means of its own wheels into the discharge station type guide fork and is locked in place. A pneumatic coupling is used to connect the discharge pipe to the container discharge valve. Type Platform The container is placed onto the emptying station with the aid of a lifting device (crane or forklift). Equipment Positioning of the container Pneumatic coupling between container and the further production step Pneumatic rotary cylinder for automatic opening / closing of the container discharge valve (0/90°)