Threading - Import export

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates d1 [mm]: Drylin® - Product overview DryLin® - System selection & Lifetime calculation Anti-backlash lead screw nut assembly d1 [mm]: Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw L = Length TR = thread outer diameter m = pitch Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

Threaded bolts DIN 976-1, type A M3 to M6 x 96 mm Double threaded bolts wth a rolled-on unilateral or bilateral thread M2.6 to M10 mm Length of up to 1.000 mm Possible materials: Regular steel, stainless steel, brass, copper, light metals. Available with all standard surfaces.

During re-machining, a cutting tool is used to remove material from a workpiece in order to shape or surface it as required. We offer re-machining (turning, twisting) as wage work. The following machining operations we offer: Turn thin stem, pins and tips Screw punctures, approaches and undercuts Heads of screws / cold shaped parts machining process (turning) further machining operations are possible on request. Our curve-controlled automatic Audrema lathes offer you further possibilities of finishing cold-moulded parts. These automatic lathes are designed to achieve maximum precision and reproducibility at high throughputs. Short loading and unloading times permit economical production of medium-sized and large series.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

The HONSEL COIL "cone" can be installed in the same way as a coil with tab. No additional or special tools are required for process-reliable installation. When the HONSEL COIL "cone" is screwed onto the installation spindle, the conical portion of the wire thread insert creates a clamping effect between the installation tool and the coil. This ensures a stable installation process into the work piece. Advantages: — tab-free and therefore optimally designed for e-mobility due to no risk of tab debris. — Shallower blind hole depths can be realized — Subsequent processes are no longer necessary (breaking and removing of the installation tab) — No thread skipping during installation — Cycle time reduction of 20-30 % per installation — No special tools required for the installation process — The installation process improves due to the conical portion

Coil screw system 2G for automated and partially automated installation of wire thread inserts. Due to the slim construction, screw systems can be placed close to each other. This leads to more efficient use of existing production areas and thus to greater economic efficiency in production. The electric linear motor is very fast at up to 3.2 m/s and enables cycle times in production to be optimized. — Screwdriver Bosch BG2 — Floating screwdriver bearings — Integrated coil transfer with rotary gripper — Linear motor — Camera

Threaded rods for wedge sockets in special design with property class 8.8 for applications with high-tensile bearing means Surface black passivated ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Threaded rods for wedge sockets in special design ATTENTION: The strength of the threaded rod must be in accordance to the strength of the wire rope. Other dimensions on request!

Eyelet bolts Eyebolts with larger eye (forged) ATTENTION: The strength of the eyelet bolt must be in accordance to the strength of the wire rope. * Please indicate length of thread with your order

Eye bolts acc. to DIN 444 with property class 8.8 for applications with high-tensile bearing means surface black passivated ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. Item-no.: S05 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no. Other dimensions on request!

Eye bolts acc. to DIN 444 galvanized surface ATTENTION: The strength of the eye bolt must be in accordance to the strength of the wire rope. * not acc. to DIN 444 ** Item-no.: S01 0020 A0 ### 000 *** Item-no.: S01 0027 A0 500 000 Item-no.: S01 00XX A0 ### 444 Insert the thread size for XX and the bold length for ### in the item-no.

Threaded bars ~DIN 975 Standard length 1000 mm, further lengths on written request. Material: PA 6 Colour: natural

Threaded pins with internal hexagon ~DIN 913 (~DIN EN ISO 4026) Minimum order quantity: 1,000 pcs. per order and dimension Material: PA 6.6 Colour: natural

Material: PEEK Colour: light brown - Temperature: max. 180°C - High-strength and excellent form stability - High modulus of elasticity and excellent creep resistance - Resistant to many chemicals - Flammability rating: UL94 V0 - Further PEEK products: series 280 to series 285 and 302

ETTINGER GmbH is your partner for manufacture and distribution of high quality standoffs made of steel, stainless steel, brass, aluminum and other materials. Standoffs, also called distance bolts, are used to hold or fix components such as electronic circuit boards apart. Standoffs are mainly manufactured from hexagonal bars to simplify assembly. There is no specific industry standard for standoffs. ETTINGER produces standoffs using cam-controlled automatic lathes and CNC lathes. We count prestigious large corporations and their suppliers among our customers as well as medium-sized and small manufacturers across the whole of Europe. We are constantly expanding our global delivery capacity. Many years of experience in manufacturing standoffs prompted us to set up an effective quality management system – which is responsive to specific customer requirements.

In amber glass. Various sizes in clear glass available. From 30 ml until 1.000 ml with the same neck

These caps are certified to ISO 8317 for plastic- and glassbottles from 30 ml until 1.000 ml. We can also supply the bottles for these caps.