Data transmission - Import export

Our wireless SureCross system enables simple and fast transmission of process data from the field to higher level control systems. In both versions, DX70 for simple cable replacement as well as in DX80 for a complex network, gateways communicate through radio signals with the nodes in the field and transfer the signals of the field devices to the controller.

Save 88% assembly time with cost-effective energy chain for intralogistics and crane systems. The igus autoglide 5 system transfers energy, data, fluids, and air safely in a single system, requires almost no maintenance, and is also very cost-effective, including a 2400.07AG.075.0 e-chain, steel cable guide, harnessed bus cable, and five single cores of 6mm² each.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

We assemble cables according to customer specifications for all kind of applications. In addition to common cable types, we also offer the production of customer-specific special cables, including the manufacture of customer-specific connectors. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap

The Hoymiles Gateway DTU-WLite is a data transmission unit that uses 2.4G wireless communication to collect information and data from microinverters and transmits them to the Hoymiles surveillance system S-Miles Cloud via WiFi technology. The DTU is compatible with the Hoymiles HM and MI series.

Our individually combinable components for modular slip ring systems offer you maximum flexibility in planning your rotating current and data transmission systems. The individual components from MACK are available in different sizes and versions – from space-saving slip rings to the solid power ring for high currents. Naturally in connection with the right current collector. What characterises this system is optimum adaptability for every single customer application and installation situation.

Capacitive displacement sensors are designed for measurement tasks that require extremely high precision. The capaNCDT 6500 capacitive multi-channel system is ideally suited to reliable measurements down to sub-nanometre resolution. The controller offers a maximum response rate of 7.8kHz (digital, with up to four channels) or a frequency response of 8.5kHz. As well as an analogue output, an EtherCAT interface is also available. EtherCAT enables accurate data transmission in real time, with high speed integration into the existing measurement environment and synchronisation of two systems. Set up and configuration of the capaNCDT 6500 system are carried out easily using a web browser.

Versatile, turnkey diesel high-pressure pumping units Special applications require customised high-pressure systems, which KAMAT can provide from the initial project idea through to turnkey installation, with 100% of the manufacture taking place in-house. Depending on the application, our customers can choose from a range of drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation. However, the units are ready for use on the base frame on which they are delivered. KAMAT diesel-powered units are traditionally used in industrial cleaning and pressure testing, mining and water hydraulics, but special solutions for special fluids or to meet explosion protection requirements are also part of the KAMAT range. It makes no difference whether the customer requires a mobile or stationary unit.

Well connected: installing system electronics. Today’s machines are not just mechanical. They have sophisticated electric and electronic components, information technology and data transmission systems. This is why it goes without saying for us that we take the same care when reconnecting these elements as we do with the mechanical parts and components. Electrical and electronic installations are just as much a part of our services as the subsequent I/O checks. We also have specialists in programmable logic controllers (PLC technology). Relocations are often a good opportunity to equip older systems with the latest, more efficient electronic components and operator’s stations. You can always ask our engineers any questions you might have about the control system hardware and software programming. Our carefully planned solutions for digitalizing and networking production systems support our customers on their path toward Industry 4.0. The electronics and electrics in today’s...

The recording of operating data such as flow volumes, pumping pressure, operating hours and power consumption of the pumps etc. is essential for the state monitoring of – usually municipal – pumping stations and pressure line as well as for the diagnosis of machine components. Data recording system with LCD display for the electronic acquisition, display, recording, evaluation, remote transmission and archiving of up to 6 analogue and digital input signals. Product features For daily, monthly, annual evaluation; meter statuses, operating times and volumes; min., max. and mean value recording Multi-colour display, digital, bar chart and graph representation Archiving in the internal memory and on compact flash card (no data lost in the event of a power failure!) Remote data transmission via standardised interfaces Suitable for door installation in the AWAcontrol control cabinet

For special applications, individual high-pressure systems are required, which KAMAT can provide from the initial project idea to the turnkey installation, with 100% of the production taking place in-house. This also applies to electric high-pressure pumping units. Depending on the application, our customers can choose between different drives, power transmission components, PLC controls, measuring systems, data transmission, remote controls, pneumatic and electric valve controls, chassis and sound insulation equipment. Even the electrical units supplied on the base frame are fully operational and can be used directly by the customer. Electric units have the advantage of emission-free operation at extremely low noise levels. ATEX certified high pressure electric units can also be used in ATEX hazardous areas.

Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature.

Bridge thermostats are suitable for controlling the temperature of any bath. External systems can also be controlled using rotational speed controlled pressure-suction pumps with VPC technology. Models with a larger heat output are suitable for larger bath volumes. The telescopic arm can be pulled out to a length of a maximum of 884 millimetres. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the touchscreen. Thanks to the new favourites menu, the one-click operation and the integrated technical glossary the operation is very easy, just like on a smartphone. Integrated USB and Ethernet ports allows connection to a PC or network, e.g. for remote control or data transmission. Pilot ONE controller with Plug & Play technology Precise temperature control 5.7“ touchscreen and comfortable menu navigation Overtemperature.

Our products are unseen aides installed in many electric machines and motors: from huge plants to compact hand-held devices. Are you looking for a entirely specialised solution for current and data transmission? We produce the right carbon brushes and brush holders for the broad range of applications which characterises the field of electrical and plant engineering. This includes filling and packaging machinery, waste water treatment plants or revolving door systems, just as much as the manual electrical appliances which provide professional and hobby craft workers with reliable service. And these are a just a few examples. As we are system suppliers, you can be absolutely sure: MACK supports you throughout the entire development process. MACK supplies first-class OEM quality and durable replacement parts from in-house production. MACK makes your ideas come true!

Our small and industrial carbon brushes are used in many different power- and signal-transmission applications. How can we help you? The range of different dimensions and versions of small and industrial brushes is enormous: It's no wonder the quality products from MACK are used in many electrical tools, small motors, AC and DC motors, in the automotive field, and many other applications. With higher currents, such as in wind turbines and grounding systems, our metal graphite grades ensure optimum transmission. Our silver graphite carbon brushes are also used in marine shaft grounding and in signal- and data-transmission systems, for example, in tachogenerators. Do you want to make ordering small and industrial carbon brushes as fast and uncomplicated as possible? Then use our online MACK carbon brush configurator. With just a few clicks, your enquiry or order reaches us – and then is quickly sent on the way to you.

The aspects of data acquisition, tracing and data processing also play an increasingly important role in industrial plants. In the age of Industrie 4.0, we have been offering "big data" for years. In our plants and systems, we use database systems that perform several tasks simultaneously. Modern databases, such as MS SQL or Oracle, offer flexible interfaces which supply the plant with order data from the ERP system and enable the transmission of consumption data from the plant to the ERP system. IFA Technology has developed the GraviSoft software for archiving and recording data and errors in an SQL database. In addition to the usual features, the GraviSoft 3.0 version also offers new, future-oriented highlights, for instance

The process photometer ZPM measures the transmission of optical transparent materials like silica, glass, crystal, or plastics plates. The influence of ambient light is minimized by using a modulation technique. This is of special importance for the measurement of scattering samples. Yoke photometers measure at a fixed wavelength between 254 nm and 980 nm or with selectable wavelengths, for example, red (630 nm), green (520 nm), and blue (470 nm) for ZPM RGB. Our range includes more than 30 wavelengths; thus, the photometer can be optimally adapted to the application. Transmission data are steadily shown on the display. Measuring data can be read by a computer or PLC (optionally) manually or after being triggered. The device under test can be adjusted and fixed using the optional alignment table. We also manufacture individual yoke photometers for scattering samples or custom sizes. You can take advantage of the modular base unit and our in-house CAD-CAM production.

The DCT 531P was designed for use in the food / beverage and pharmaceutical industry. The compact design with hygienic versions guarantees an outstanding performance in terms of accuracy, thermal behaviour and long term stability. The integrated RS485 interface is characterized by a robust and reliable data transmission that works failure-free even over long distances. Additionally, the modular construction concept of the device allows to combine different electrical and mechanical connections. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 400 bar — accuracy: 0.25% FSO — output signal: RS485 with Modbus RTU protocol — CIP / SIP cleaning up to 150 °C — diaphragm with low surface roughness — reset function — ingress protection IP 67 / IP 69 Optional Features: — different process connections — cooling element for media temperatures up to 300 °C

DATAPAQ Reflow Tracker temperature profiling systems Program includes — range of high-accuracy, industrial-strength, compact Datapaq DP5 data loggers — range of low-height thermal barriers — DATAPAQ Insight Reflow Tracker analysis software — selection of fast-response, high-temperature thermocouples for measuring SMD and PCB temperatures and process stability Applications include — WAVE SOLDERING – accessory: DATAPAQ wave pallet with up to 9 contact sensors and 3 preheat sensors; software functions include contact times and parallelism — SELECTIVE SOLDERING – accessory: DATAPAQ PA2200 selective soldering sensor for process stability measurement — VACUUM SOLDERING – optional data transmission via radio enables real-time data analysis — VAPOR PHASE SOLDERING – program includes a special range of sealed and lighter-weight thermal barriers — REWORK STATIONS – the DATAPAQ DP5 data logger with its USB and Bluetooth connectivity is ideal for high-speed, real-time monitoring

DATAPAQ TP3 data logger * 10 or 20 thermocouple channels * Temperature range: -100 °C – 1370 °C/-148 °F – 2498 °F * Sample interval: 0.1 sec – 50 min without telemetry; 1 sec – 50 min with RF radio data transmission * Memory: 3.6 million data points * Robust stainless-steel machined case * High logger accuracy: ±0.3°C (±0.5°F) Comprehensive thermal barrier range for * Heat treatment and TUS * Vacuum carburizing and vacuum heat treatment * Aluminum solution treatment and age hardening * Steel slab and billet reheat * Controlled atmosphere brazing * Aluminium vacuum brazing Specialized software for TUS applications is trusted by hundreds of our customers to meet the stringent requirements of AMS2750E and CQI-9 certifications. Fluke Process Instruments offers a wide variety of PTFE, glass fiber or mineral insulated thermocouples to withstand harsh environments and high temperatures, conforming to the highest standards and providing the most accurate data possible.

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

Bus technology has advanced over the last few years in industrial automation. The connectors required for data transmission are very bus-specific in their design. To access the very complex world of bus technology, CONEC offers connectors for Profibus DP, Device- Net and Industrial Ethernet 10 Gbit. Profibus is a manufacture-dependent, open field bus system for a variety of applications in manufacturing, processing and building automation. Industrial Ethernet is the general term for all applications that use the Ethernet standard to network devices used in industrial automation.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

For conventional wiring of motors, servo-drives or linear units/drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.

CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.