Converters - Import export

Our high frequency converters are providing frequencies of up to 2 MHz at up to 200 kW output. For lower frequencies down to 4 kHz we have our mid range frequency converter series MU.

Our mid range frequency converters are delivering up to 250 kW output at frequencies down to 4 kHz. For high frequencies up to 2 MHz we have our high frequency converter series HU.

Weber offers converters for all common frequencies (20 to 35 kHz) and power requirements (200 to 5,000 W). These converters are especially durable due to the Titanium-Aluminum alloy. Available as planar type together with matching booster or for direct Sonotrode attachment.

The DC-voltage converters developed for the electronic components in the motor car are characterised by their ease of installation in every vehicle. The high degree of stability, the compact design, sustained short-circuit resistance as well as the high level of operating safety are the quality hallmarks of this series. The areas of application span the mobile employment of 12-V-consumers in vehicles with a 24-V-onboard network. The devices are particularly suitable for operating car radios, stereo units, radios, cooler units, car telephones, computers, 12-V-trailer lighting etc. The voltage converter converts an input direct voltage into an output direct voltage. The input voltage must be greater than the output voltage. No base load is required at the output end. A 26 kHz PWM switching controller is used for this purpose. Input and output are not isolated. The common earth is connected with the voltage converter housing.

✓ Ultra wide input range 6...36VDC ✓ Selectable output voltage +12V, +19V or +24V ✓ Very compact design 132mm x 56mm x 17mm ✓ Full performance in the extended temperature range of -20°...+60°C ✓ Very high efficiency up to 98% ✓ More than 10 years capacitor lifetime ✓ Optional output voltage compensation via sense lines ✓ Optional Remote On/Off ✓ Incl. thermal pad, jumper and distance bolts ✓ Made in Germany With 98% efficiency and 300W output power the powerful open frame DC/DC converter offers an ultra-wide 6-36 V input as well as three selectable output voltages 12V / 19V / 24 V, so that almost any corresponding single-voltage motherboard or computer system can be supplied. The very compact DC converter “Made in Germany” delivers fanless full power in the extended temperature range of -20°…+60°C and up to an operating altitude of 5000m.

i/p converter for the electrical control of pneumatic positioners. Suitable for field and switch cabinet assembly. Suitable for remote control of valves in hazardous areas. Also in Ex version II 2 G EEx ib IIC T6.

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for thermoforming » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Symmetrical layer structure » Enhanced EVOH-barrier-layer especially for thermoforming applications » Sealing layer optional equipped with Peel

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for tubular pouch applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » Very good Hot-Tack-behaviour » High transparency » Asymmetrical layer structure » Enhanced sealing-layer especially for tubular pouch applications

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for hot filling applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Various tintings possible » Asymmetrical layer structure » Modified sealing-layer especially for hot filling applications

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for side-sealed pouches without aluminium/metallization » Lamination of multilayer films for tubular pouches without aluminium/metallization » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » Various tintings possible » Symmetrical layer structure » Sealing layer optional equipped with Peel

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for top-web applications » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Symmetrical layer structure » Sealing layer optional equipped with Peel » Optional equipped with Anti-Fog » With UV-protection upon reques

Universal drive control for utmost efficiency MAGSON magnetically coupled centrifugal pumps are extremely efficient by nature. Using the SFU frequency converter for optimum adjustment to changing conditions, this efficiency will increase even more. Thanks to leading-edge control technology, the SFU permanently adjusts the discharge rate to specific requirements. Whenever the rate has to be reduced or the pump has to be operated with changing volume flows, using a frequency converter will save you lots of money. Thus, the power required by a pump running at half speed is only 12% of the original demand. So the system operates with optimum efficiency but saves a lot of energy, especially in part-load operation.

The 9206 USB sensor interface series is ideally suited to Notebook-based mobile use for high-precision, traceable calibration jobs that must be performed on-site for equipment such as presses, torque measurement facilities and pressure control systems. A factory calibration certificate or German-accredited DAkkS calibration certificate can optionally be provided for the USB interface plus relevant sensors, ensuring compliance even with the stringent traceability requirements of quality assurance standards. Specific characteristics: —Cost effective "Plug&Measure" concept —24-bit resolution —Practical and convenient DigiCal calibration and data acquisition software —Pt100 as option —Free LabView driver DLL for integrating in your own software environment —Multipurpose reference measurement chain with optional factory calibration certificate or Germanaccredited DAkkS calibration certificate —6-wire connection technology

Flange converters are available for all common frequencies (20 to 35 kHz) and power requirements (200 to 5,000 W). They are designed to keep weight at a minimum and their standardized quick disconnect allows for easy and fast integration with robot applications.

MANUFACTURING PROCESS: » Blown-Coextrusion MAIN APPLICATION: » Lamination of multilayer films for top-web applications on PE and PP » Modified Atmosphere Packaging FIELDS OF APPLICATION: » Food » Non-Food » Medical/Pharma FEATURES/PROPERTIES: » Very high O2- and CO2-barrier » High seal strength » High transparency » Asymmetrical layer structure » Equipped with Anti-Fog » Modified sealing-layer for firm-sealing on PE and peel-sealing on PP

Novelis aluminum converter foil is a part of the light- or thin-gauge product group, ideally between 5 and 70 μm. They form flexible laminates with supporting materials like polymers or paper and additional lacquering and coating. Novelis is a preferred source of converter foil for global players in the flexible aluminum packaging industry, where it is then subjected to further processing, including laminating, extrusion, lacquering and printing, embossing and cutting. The versatility and flexibility of the products enable our customers to create a diverse range of packaging solutions, finding end applications across diverse industries such as food – including butter packaging and cheese packaging – pharmaceuticals, wraps, bottle capsules, laminated tubes, pouches and more.

THK 200 THK 400 THK 1250 Compatible with any thermocouple probe type K, J, T or R/S (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

USB temperature converter - including free readout software - efficient and flexible measurement without additional measuring system - mobile and directly on site - for all common thermocouples.USB stick with software for direct reading and further processing on the PC Plug connection - flexibly connect the USB stick to the temperature sensor Processing of the measured values, transfer to the software Different temperature sensors and thermocouples possible Various cable types , lengths and types of connections can be selected

For head or field installation Feed via current loop Temperature compensation Measurement/monitoring to USP<645>

THA 200 THA 400 THA 1000 THA 1250 Compatible with any thermocouple probe type K, J or T (selection) fitted with a miniature plug. The thermocouple probe wires must be isolated from supply ground.

What you can expect from APROVIS SCR catalytic converters: - SCR housing with insulation - Optimised design of the catalytic converter honeycombs - Injection section with static mixers - Daily service tank - Dosing station for exact dosing of the reducing agent - Continuous measurement of nitrogen oxides (NOx) - Controlled urea injection at measured NOx values - High conversion rate and long service life

What you can expect from APROVIS oxidation and three-way catalytic converters: - Individual design for each specific application - Also special production for special applications - Short delivery times - Compliance with the limits over the warranty period - Use of soldered metal supports to withstand high thermal and mechanical loads - No telescoping of the catalytic converter elements

For head or field installation Feed via current loop Impedance monitoring

Connects PC and GMH 3xxx device Power supply via PC

The measurement data acquisition module µCAN.1.ai-SNAP acquires analogue measurement signals and links them to the digital CAN world.

The µCAN.4.ci-BOX is equipped with 4 fast counters of up to 100 kHz. The CAN module acquires and processes the binary pulses and transmits them to a higher-level system.

The cable transmitter module µCAN.1.ai-TRS is designed to acquire one analogue measurement signal. The TRS module is integrated directly in the measurement line where the analogue signals are digitized and transmitted to the processing unit via CAN interface.

Special cleaner for thorough and gentle cleaning of all fabric and plastic tops. Cleans without dirt marks and lets the colors shine again. Other sizes available on request

The Regular Collection is available as bridge, half-wave, and bridge/half-wave rectifiers. The bridge/half-wave rectifiers reduce the output voltage after the brake is released. Depending on the selected rated coil voltage of the brake, either a faster switching by overexcitation, a reduction of the electrical power while the brake is released or a combination of both is possible.