Results for
FEINMETALL GMBH
Germany
Large variety of contact probes (pogo pins) for contacting PCBs even at difficult contacting conditions, different sizes, tip styles and spring forces available.
Request for a quoteSPIROL
Germany
SPIROL's Knurled Pins are manufactured with two different knurl types: straight knurls and helical knurls. Unlike a Straight Pin, where retention is provided by the uniform interference between the pin and hole, Knurled Pins are designed to cut into the host. The displacement of the host material into the valleys of the knurls yields more frictional contact area between the Knurled Pin and hole; thus resulting in higher retention. Solid Pins with retention features such as knurls and barbs allow for wider hole tolerances than Solid Pins without retention features (i.e. Straight Pins).
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
socket 15 - pole for standard - and corrugated pipe cable NW 13 24 Volt, ISO 12098, ADR / GGVSE - qualified, with 15 crimp - contact pins (with snap - fit cage) for cable 12x1,0 mm² - 1,5 mm² ... Category Electrical equippment for vehicles / 24 Volt / Sockets / 15-pole / With crimpcontacts for corrugated tubelines Product number supplier 777544
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
socket 15 - pole for standard - and corrugated pipe cable NW 13 24 Volt, ISO 12098, ADR / GGVSE - qualified, with 15 crimp - contact pins (with snap - fit cage) for cable 12x1,0 mm² - 1,5 mm² ... Category Electrical equippment for vehicles / 24 Volt / Sockets / 15-pole / With crimpcontacts for corrugated tubelines Product number supplier 777544
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and • spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple material and spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
THERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
crimping tool for crimping our contact sleeves and -pins from 1,5 mm² / 2,5 mm² / 4 mm² and 6 mm² Category Electrical equippment for vehicles / Accessories / Crimping tools Product number supplier 209070
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
crimping tool for crimping our contact sleeves and -pins from 1,5 mm² / 2,5 mm² / 4 mm² and 6 mm² Category Electrical equippment for vehicles / Accessories / Crimping tools Product number supplier 209070
Request for a quoteBERNSTEIN AG
Germany
Our SEL series door contacts offer you a particularly long mechanical service life. They are available in three different versions with separate actuator. You can also choose between four different actuator variants. Due to its elastic design of the contacts, the contact plates are mechanically moved with each actuation; this causes a cleaning effect by the actuator. Dirt, dust, and possible oxide layers are rubbed away – the electrical contact is made reliably. — Door contact with contact plates or contact pins — Mechanical lifetime: more than 10 million switching cycles — Protection class IP20
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
D-SUB Connectors – also known as D-Subminiatur or Sub-D connectors – are used in nearly all application markets, from control and measuring to telecommunications and computer applications. D-SUB connectors take their name from their characteristic D-shaped shell, which protects both sides of the connector from mechanical and electromagnetic interference CONEC D-SUB connectors are available in five standardized housing sizes in the variants D-SUB Standard, D-SUB High Density, D-SUB Filter, D-SUB Combination, D-SUB Filter Combination and D-SUB hoods. The combination of different contact types provides opportunities to save installation space and costs in the interface area. The CONEC Snaplock mounting type is offered as a quick-connect system for common pole numbers. Depending on the mounting type and number of poles, a choice can be made between crimp, wire-wrap, solder pin, solder cup and insulation displacement terminal connection types.
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
D-SUB Standard, Solder pin – Angled, .370" 9.4 mm, Precision machined contacts, Metal bracket Mounting styles: — with mounting bracket and 4-40 UNC or M3 threaded insert — with mounting bracket, PCB clip and 4-40 UNC or M3 threaded insert — Quality class 3 (also available in quality class 1) — Shell: Steel tin plated (brass tin plated or stainless steel available on request)
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
With increasing demands on the efficiency in agriculture, precision farming is becoming more and more important. Precision farming stands for the targeted management of utilized agricultural land, e.g. the individual application of fertilizers and plant protection products depending on the position of the utilized land. To ensure the necessary communication between tractor, equipment and agricultural management software, the non-proprietary ISOBUS is used. ISOBUS is specified in standard ISO 11783-2 and describes the BUS including the connectors used with it. To extend the CONEC product range in the field of connection solutions for agricultural and construction machinery, the connectors for ISOBUS are included in the ready-made and overmoulded design. The overmoulded ISOBUS-series is available as male and female version. The contact carrier has the 9-pin contact image required by the standard.
Request for a quoteMOSCA GMBH
Germany
Modular construction High-end Standard 6 sealing unit Narrow sealing unit with ultrasonic sealing system Pneumatic hold-down device Pneumatic side pusher with opposite buffer plate Signal exchange via 16-pin contact Easy accessibility and tool-free disassembly of strap path components Low-wear DC drives with integrated electronics Stepless turnable operation panel (ECOB) for many-sided operation Adjustable strap tension via operation panel Programmable strap tension value Switching from maximum to material-friendly Eco-speed in the control Cycle counter integrated in the control Quick strap coil change Strap coil changeable from the front and the side Automatic strap threading system Strap end detection with ejection of remaining strap Automatic strap loop ejection Extremely low energy consumption Stand-by mode 4 castors, 2 of them lockable CE marking inclusive conformity declaration Structural painture in RAL 5010, gentian blue
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
iwis Leaf chains (according to works standard) are produced from precision chain parts according to ISO 606. They can be customized and are compliant with the EC Machinery Directive 2006/42/EC. Highlights - iwis link plates with very high tensile strengths - Pins with extra hardened surface for high wear resistance - Precision-formed, heat-treated and shot-peened link plates with optimised geometry - Higher breaking forces achieved by optimised plate thickness - Improved press-fitting of pins and outer plates for higher fatigue strength - Link plates with a particularly high contact ratio - Pins with hardened surfaces for increased wear resistance - Special versions manufactured to works standards available
Request for a quoteDR. JOHANNES HEIDENHAIN GMBH
Germany
The TT 160 and TT 460 tool touch probes aretouch trigger probes for the measurement and inspection of tools. The TT 160 features signal transmission by cable, while the TT 460 communicates wirelessly over a radio or infrared beam with the SE 660 transmitter/receiver unit. The disk-shaped probe contact of the TT is defl ected during physical probing of a tool. At that moment the TT generates a trigger signal that is transmitted to the control, where it is processed further. The trigger signal is generated through a wear-free optical switch that ensures high reliability. The probe contact is easy to exchange. The connection pin to the contact plate features a rated break point. This protects the touch probe from physical damage due to operator error.
Request for a quoteIWIS ANTRIEBSSYSTEME GMBH & CO. KG
Germany
Highlights: • Wide range of products • Dimensions according to ISO 1275 • Versions with small rollers and transport rollers available • All ELITE chain plates 1 are manufactured using processes such as fine blanking and ball-drifting, so a particularly high Product range: • Double pitch roller chains ISO 1275 • Double pitch roller chains with straight plates ISO 1275 • Double pitch hollow pin bushed chains • Double pitch hollow pin roller chains contact ratio is guaranteed. • Solid, case hardened rollers 2 with good wear resistance • ELITE pins 3 are smooth and have an extra hard surface for increased wear resistance
Request for a quoteResults for
Contact pins - Import exportNumber of results
29 ProductsCountries
Company type