Contact pins - Import export

Large variety of contact probes (pogo pins) for contacting PCBs even at difficult contacting conditions, different sizes, tip styles and spring forces available.

Metal stamping pin, contact, terminal are widely used on electronics like socket, switch, plug, battery, PCB, car antenna, car charger, material usually is copper, beryllium; copper, phosphor bronze with super electrical conductivity, and they can be silver, gold, tin, nickel plated with 4-10 micron thickness.

SPIROL's Knurled Pins are manufactured with two different knurl types: straight knurls and helical knurls. Unlike a Straight Pin, where retention is provided by the uniform interference between the pin and hole, Knurled Pins are designed to cut into the host. The displacement of the host material into the valleys of the knurls yields more frictional contact area between the Knurled Pin and hole; thus resulting in higher retention. Solid Pins with retention features such as knurls and barbs allow for wider hole tolerances than Solid Pins without retention features (i.e. Straight Pins).

NSPV PV4.0 Solar cable connector 1500VDC Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Compatible with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 60Amp. P.S.:1.5-6sqmm with Stamping pin and lathing pin,10/16sqmm with Lathing pin only.

NSPV PV4.0 Solar cable connector 1500VDC Features: TUV&CE certified; Imported PPE insulation material; IP68 degree of protection at 1m,1H; Compatible with MC4 connectors; Low contact resistance for ≤ 0.25 mΩ; High voltage for 1,5kV DC and high current for 60Amp. P.S.:1.5-6sqmm with Stamping pin and lathing pin,10/16sqmm with Lathing pin only.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

socket 15 - pole for standard - and corrugated pipe cable NW 13 24 Volt, ISO 12098, ADR / GGVSE - qualified, with 15 crimp - contact pins (with snap - fit cage) for cable 12x1,0 mm² - 1,5 mm² ... Category Electrical equippment for vehicles / 24 Volt / Sockets / 15-pole / With crimpcontacts for corrugated tubelines Product number supplier 777544

socket 15 - pole for standard - and corrugated pipe cable NW 13 24 Volt, ISO 12098, ADR / GGVSE - qualified, with 15 crimp - contact pins (with snap - fit cage) for cable 12x1,0 mm² - 1,5 mm² ... Category Electrical equippment for vehicles / 24 Volt / Sockets / 15-pole / With crimpcontacts for corrugated tubelines Product number supplier 777544

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Ceramic housing with contacts of original thermocouple materials and 
spring-loaded sockets for reliable contact . • Reverse polarity protection by different contact pin widths. • Oversize screw head for easy wiring. • One-piece housing withstands great stresses. • Housing of high purity alumina oxide.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and • spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple material and spring-loaded sockets for reliable contact. • Moulded barriers prevent short-circuits. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.

Use: Miniature Jack/Socket for thermocouple and RTD circuits. Designed for direct soldering onto printed circuit boards. This version is suitable for flat mounting other versions available, please see separate specification sheet. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses.

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

Body and clamping pin oxidised. Contact faces hardened and ground. Note: The UNI lock 5-axis add-on modules are used for raising basic modules and mounting base. Depending on the clamping situation, optimum assembly height can be achieved using a combination of the basic module and add-on module.

crimping tool for crimping our contact sleeves and -pins from 1,5 mm² / 2,5 mm² / 4 mm² and 6 mm² Category Electrical equippment for vehicles / Accessories / Crimping tools Product number supplier 209070

crimping tool for crimping our contact sleeves and -pins from 1,5 mm² / 2,5 mm² / 4 mm² and 6 mm² Category Electrical equippment for vehicles / Accessories / Crimping tools Product number supplier 209070

Hai Tong have high speed press range from 25 to 60 tons utilizing Micron high speed press introduced from Taiwan, We stamp ferrous, non-ferrous, copper based alloys, stainless steel, aluminum,with speeds up to 1500 SPM. We manufacture quality and premier product and we always exceed our customers' expectations. Our progressive die stamping services are perfect for manufacturing components with tight tolerances of +/-0.01mm. We have 15 years of toolings fabrication experience and can consult on any project including failure analysis. We produce pins, copper contact, copper terminal, printed circuit contacts, and much more, which are used on switch, plug,s ocket, computer, household appliance,etc

These supports are placed under long or thin workpieces to prevent vibration or bending during milling, drilling, grinding or shaping operations. The support can be accurately placed without the need to reach under the workpiece. The support pin contacts the workpiece under light pressure. It can be tightened in any position. Various types of pins can be screwed into the tapped hole in the thrust pin to adapt the support height. The supports 02380-075, 02380-150 and 02380-170 have only 1 slot.

In addition to the standard range of Micro-D connectors and assemblies, axon’ is able to develop custom designed solutions, based on Micro-D twist-pin contact technology. Such solutions are ideal when the operating conditions are critical for applications including aerospace, military, industrial, medical or off-shore. Advantages Space saving Integration with specific cable or harness configuration, for a finished product High EMC protection Special shape to facilitate mechanical integration Customised solutions Extreme miniaturisation Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration, low contact resistance, 500 g mechanical shock resistance. Construction A complete range of standard Micro-D connectors : Twist pin contacts Metal/plastic shell Rectangular and circular connectors Solder cup and crimped terminations Pigtails PCB connectors (CBR/ BS/ BR, surface mounting) Saver/microstrip

- Based on the highly reliable Twist Pin contact technology - Operating temperature: from -55°C to 200°C. - Metric thread version for space saving. - Three lug bayonet version for quick connect/ disconnect. - Triple start thread (anti-decoupling) version: highly vibration-proof ratchet system. - Breakaway version for quick connect/disconnect. - Plastic shells: easy to use, very small and lightweight. - A large range of panel mount configuration

Axon’ offer a complete range of Micro-D and Nano-D interconnect assemblies which is ideal when the operating conditions are critical for applications including aerospace, military, industrial, medical or off-shore. Advantages Space saving wiring solutions EMC protection Special material to facilitate mechanical integration Customised solutions Miniaturisation up to Nano-D Twist-pin male contact : high reliability of electrical connection in severe conditions of temperature and vibration Operating temperatures : -55°C to 150°C (MIL-STD-83513) Construction Insulated wires and cables Total Micro-D connector range: Plastic and metal shells with LCP insert PCB, pigtails, solder cups, savers, PCB connectors (CBR, BS, SM, …), strip connectors, … Overmoulding solutions Various configurations are possible : shaped assemblies, multi-branch harnesses, … Range of QPL-products Nano-D pigtails and PCB connectors