Results for
EISELE GMBH
Germany
- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread with hexagon socket - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
- Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- with shut-off valve - M5 thread - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range 0 to 232 psi (0 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- R-thread - Whitworth pipe thread conical - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread- VS seal rings - Seals in connectors NBR - Material brass nickel-plated - Temperature range -4 to 158 °F (-20 to +70 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteBEKO TECHNOLOGIES GMBH
Germany
The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.
Request for a quoteSIKO GMBH
Germany
Accessory Profile KP09P: Pneumatic clamping plate for shaft clamping Selectable sizes of the compressed-air connection Easy mounting and retrofitting
Request for a quoteSIKO GMBH
Germany
Accessory Profile KP09: KP09 for shaft diameters 8–20 mm Selectable sizes of the compressed-air connection Easy mounting and retrofitting
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatic cylinders according to the norm, standard or special design, completely configured ready for installation and pre-assembled with add-on parts, bearing elements, compressed air connections, position sensors or control valves according to customer specifications.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240253
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240252
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240253
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Functional connections / Check valves / For hose connection Product number supplier 240252
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Plug connections / T-Form / Connectors / Plastic Product number supplier 249030506
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SAMSYS GMBH
Germany
he cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agent from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.
Request for a quoteSAMSYS GMBH
Germany
The cleaning station MiJET Wash Station with integrated cleaning basin ensures clean workplaces and oil-free cleaned workpieces. No electrical connection is required for this. Only a compressed air connection is required. Application The washing station consists of a worktable, in which a wash basin with nozzle and a MiJET are installed. The washbasin serves as a pre-cleaning unit, the MiJET then removes excess cleaning agents from the workpieces. Ideally, the washing station is useful for heavily oiled workpieces as well as for scratch-sensitive parts. The advantage for easy blowing off of the parts is that oil mist formation is prevented and thus the health of the operator is not endangered. In addition, the working environment remains free of oil.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101100
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Category Compressed-air technology / Screw connections for air brake systems / Parts / Sealings / Brass/rubber sealing rings Product number supplier 101099
Request for a quoteSAMSYS GMBH
Germany
With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.
Request for a quoteSAMSYS GMBH
Germany
With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
straight connection tapered rotatable Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled, rotatable Product number supplier 249010106
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
straight connection tapered rotatable Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled, rotatable Product number supplier 249010106
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
straight connection tapered Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled Product number supplier 249010017
Request for a quoteWIWOX GMBH SURFACE SYSTEMS
Germany
WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
straight connection tapered Category Compressed-air technology / Fast closing connections / Straight / Imperial screw-in thread BSPT beveled Product number supplier 249010017
Request for a quoteSAMAG MACHINE TOOLS GMBH
Germany
used horizontal machining center, year of construction: 2008 Product name: MFZ 2-2 Update Used 2-spindle horizontal 5-axis machining center Year of construction: 2008 Sinumerik 840D Powerline control Machine dimensions without coolant system and chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m Weight approx. 20,000 kg (machine without coolant system and accessories) X-axis travel: 450 mm Y-axis travel: 500 mm Z-axis travel: 450 mm Spindle distance: 450 mm Rapid traverse XY Z axis 60,000mm/min 2 x motor milling spindle GMN, version with HSK63 tool holder Drive power (S1/S6) 28 KW (constant) Torque (S1/S6) 63/83 Nm max. speed 16,000 rpm Spindle distance 450mm Chip conveyor Knoll (scratch belt conveyor in positioning variant across the machine) High-quality Knoll KSS system with fine filtration Flush gun Complete enclosure Tool storage (2 x 50 tools) Operating voltage 400V 3N ~ Control voltage 24V DC Connection value machine approx. 72 KVA Compressed air connection 6 bar
Request for a quoteResults for
Compressed air connection - Import exportNumber of results
39 ProductsCountries
Category