Complete systems - Import export

Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement

Pressure on price and quality continue to rise. The need to monitor even the simplest manufacturing and assembly process is increasingly common. With 100% monitoring of force/ time curves or force displacement/time curves, the Force- Master satisfies all requirements for ensuring the reliability of even simple press-fit processes. Thanks to its ultra-simple, single-button operation and intelligent auto-configuration, even semi-skilled staff can set up the equipment safely and quickly. "Card & Go" is the smart system that uses master, tool and PLC smart cards to make equipment settings, inhibit unauthorized changes and to trigger actions in sequence with the production process. The ForceMaster 9110 has been developed specifically for monitoring manual lever presses. Simple manual workstations can be monitored extremely efficiently using the ForceMaster. Easy control functions that used to require an additional PLC can now be performed reliably with the ForceMaster.

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.s

EPP hybrid solar systems consist of EPP solar panels, hybrid inverters and storage capacities that enable you to store solar energy and use it when you are at home when the grid goes out. The ability to store and use the solar energy when desired is called self-consumption.

To sustain the high degree of camera performance, we expanded our portfolio by adding components and devices that facilitate a more holistic system assembly. All of our standard accessories are tested and verified for quality, fit, and performance. These are comple mented by task orientated, specialized components for multi-camera aggregation, signal multiplexing, synchronization, and the interconnection with various processing hosts. For embedded applications, compact computing solutions with dedicated carrier boards complete the system configuration

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

What you can expect from APROVIS gland steam condensers: - Can be used in regenerative and conventional applications - A complete system including blowers - Materials are adapted to the relevant application - Acceptance currently according to PED 2014/68/EU and the ASME Code; additional certifications to follow

This small yet complete system with reservoir, controls, valve and tubing as well as all other necessary components can be very easily installed and is quickly set to use – even for 3 mm strip thickness

You require a special optical design or intensity distribution? We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application. We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application. Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples: individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

As a supplier of complete systems, TRAPO AG supplies modular High-Performance-Pick & Place-Systems that combine components such as robots, frame units, camera systems and conveyor technology. The modular system can be adapted to different framework conditions and thus covers almost any application. The TRAPO HPPS series forms the heart of the modular picker cell. The high-performance picker line combines maximum performance, individual TRAPO gripper technology and proven know-how, for example in the field of hygiene design.

Special Purpose Optics / Systems You require a special optical design or intensity distribution?We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application.We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application.Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

In our workshops, our experienced team assembles small subassemblies, devices, but also complete production systems. Bellingerstraße 3a: 1.000 m² assembly area (door height 4,5 m) with 10 t indoor crane

In our workshops, our experienced team assembles small subassemblies, devices, but also complete production systems. Bellingerstraße 14: 600m² assembly area (with 4 m passage)

It features a quick start plug-in system that allows you to turn it on simply by plugging it together, which makes it an easy-to-use and complete system. Also the Rover rod features satellites such as GPS, GLONASS, Galileo, BeiDou, and more, ensuring that you get the most accurate readings possible. It also comes equipped with a powerful Helix antenna and Bluetooth connection to the rover rod up to 50 meters, eliminating the need for any annoying cables. The transport length of the rod is only 104cm, making it easy to carry around. It is robust and absolutely waterproof with a protection class of IP68, and it also features an integrated battery that can last for up to 10 hours with a percentage status display. This high-quality product is made in Schleswig-Holstein by Thomastechnik GmbH.

ATMOSPHERIC PRESSURE, MAINTENANCE FREE AND PROTECTED AGAINST EXTERNAL EFFECTS The pressureless gas storage system of Lipp is used for the storage of gas produced on landfill sites, waste water treatment plants and also as external storage on biogas plants. The system is determined by its robust and technical advanced construction where the gas balloon is protected by a galvanized steel tank. This protects the balloon against UV light and also other external factors. The system is mostly utilized at landfill sites or WWTP to buffer the gas before its further processing. The experience gained during the past decades has improved the complete system and the single components and makes it a perfect choice for end users and general contractors.

Fully automatic assembly system for complete assembly of joints Automatic change-over between part types is handled by robotic solutions.

Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in parts as well as steel construction, and can be easily integrated into an existing system. The main area of application of the Lipp gas holder is municipal waste water treatment plants and landfills which want to balance out fluctuations in gas production and at the same time need a buffer store for possible downtimes. A further gas holder may also be of interest for direct marketing of biogas, where feed in at certain times is necessary. The Lipp gas holder is especially attractive when considering the fact that electricity cannot be stored. But (bio) gas, which is used for power generation

The CoMeT system is used to measure the screening effectiveness (transfer impedance, screening attenuation and coupling attenuation) of coaxial and symmetrical cables, connectors, bushings, distribution components, etc. The original CoMeT (Coupling Measuring Tube) has grown into a complete system. In principle, a cable measuring station consists of the following basic components: In addition to differently dimensioned round tube systems for cables and connectors, there are also so-called “triaxial cells” that provide a larger measuring chamber volume for parts that do not fit into one of the tubes due to their geometry (sockets, distributors, etc.).

The Sensistor ILS500 is a fully integrated leak testing system that controls tooling, tracer gas handling, test sequencing and leak testing — all behind an easy to use color touch screen display. The compact instrument helps you get a fast start for your leak testing by guiding you through the setting of parameters. It controls the gas handling so that you have gas at the right time, the right place and at the right pressure. It makes a gross leak test before spending any tracer gas unnecessarily and also assures that the used tracer gas is evacuated after the test. The tooling in your fixture is controlled by the ILS500, and the complete system is able to execute orders from a PLC or other type of computer. With the dual probe possibility, you are even able to first leak test an object with the automatic probe and immediately thereafter do leak locating with the hand probe. The Sensistor ILS500 is the perfect system for solutions ranging from manual sniffing to being a key...

This stacking solution grid | XtremeStack uses the existing space intelligently to integrate the maximum number of grid | Xtreme VR top terminal batteries to save space in a complete system and optimize footprint. The grid | Xtreme VR pure lead batteries assembled in a grid | XtremeStack rack require up to 10% less floor space than a lithium-ion solution. High space-saving solution: In comparison to conventional racks there is place for 20% more batteries in the same area. grid | XtremeStack is both horizontally and vertically expandable and adapts flexibly to customers’ needs.

In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and diameters of up to 250mm are possible. In our prototype department, we are able to simulate or modify the environmental circumstances of the fan wheels or turbines, thus achieving optimal operational conditions. Furthermore, we carry out mould-flow analysis, use ANSYS from external partners for the flow simulation and establish the fault probability and fault effect with FPFEs. New: Development of blower systems and optimization of ventilation systems.

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium oil, emulsion and water Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Furthermore, the system enables an increased flow rate. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Classification number - Filter aid without Filtration degree 30-100 µm Medium liquids of the chemical industry Filter material filter belt

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium oil, emulsion and water Filter material non-woven fabric

Advantages The multiple options enable us to fulfill special customer requests in a flexible way. FAUDI Belt Filters have the ability to be installed on existing vessels or can be delivered as complete systems with vessels, pumps, heating, cooling and control systems. Area of application For the continuous cleaning of coolants, especially emulsions and oils of machine tools and cold rolling mills. For the filtration of liquids with a high demand on purity. The impurities may vary in size, shape and material. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download product brochure Classification number - Filter aid with Filtration degree 30-40 µm Medium liquids of the chemical industry Filter material non-woven fabric

Can be dismantled in three parts so can be used from out of the building without a core drill, i.e. for FTTX, gas connections Pneumatically driven hammer bore head assembly is ideally suited for alternating soils. If the hammer bore head meets with resistance (larger rock inclusions, solid rock, rubble deposits or brickwork), the hammer effect is activated automatically. The complete system with hydraulic power unit and mixing unit MA09 can be placed on a small trailer for safe transportation. Can be dismantled Portable Can be applied from out of a building

The complete checkweigher inspection system for the fresh food area The Combination Checkweigher with Metal Detector with a built-in VARICON metal detector transforms the dynamic checkweigher CWFmaxx into a complete inspection system in compliance with HACCP, IFS, BRC, M&S and many others. Verifiable combination units optimise quality assurance. They control the packaging flow by categorising and sorting goods by freely definable or legally stipulated weight classes. Out of tolerance or contaminated packages are automatically ejected. The CWFmaxx modular checkweighing systems offer high IP protection IP65. One of the fastest and hygienic checkweighers on the market today. With weighing ranges of 10 grams to 15000 grams. Checkweighing up to 400 units per minute can be achieved. 12" operator touch screens and the Bizerba Industrial software BRAIN2, make this one of the most popular all round food industry checkweighing systems. When integrated with the Metal Detector VARICON it.

Crane Rails (A series A45/55/65/75/100/120/150) Light Rails (S10/S14/S18/..) Train Rails Grooved Rails Traverse system (Pre-stressing Wires.) Complete with fastenings systems, pads.