Complete systems - Import export

Maintenance-free, compact, quiet and cost-saving complete system - the alternative to the busbar system. For the safe guidance of energy, data, air and liquids in ONE system. - Easy to clean - No particle pollution due to abrasion - Quiet, lubrication-free, and easy to install - Operating speeds of up to 6 m/s in high-acceleration applications - Data rates up to 10 Gbit/s. Safely guides FOC and bus cables - Low space requirement

To sustain the high degree of camera performance, we expanded our portfolio by adding components and devices that facilitate a more holistic system assembly. All of our standard accessories are tested and verified for quality, fit, and performance. These are comple mented by task orientated, specialized components for multi-camera aggregation, signal multiplexing, synchronization, and the interconnection with various processing hosts. For embedded applications, compact computing solutions with dedicated carrier boards complete the system configuration

This small yet complete system with reservoir, controls, valve and tubing as well as all other necessary components can be very easily installed and is quickly set to use – even for 3 mm strip thickness

You require a special optical design or intensity distribution? We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application. We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application. Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples: individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

Special Purpose Optics / Systems You require a special optical design or intensity distribution?We offer customized solutions starting with the individual aspherical lens with an optimized design, through to complete optical systems, tailored to meet the specifications of your application.We always remain true to our own principle: Regardless of whether an individual optic or a complete system is concerned, we will put it through a test cycle which is identical to its subsequent application.Thus, we combine optimum design and replicable, dependable quality, to ensure maximum customer benefit. Product Examples individual, aspherical optics monolithic lens arrays line focus modules multi-focus spot module ring focus modules rectangular focus modules

As a supplier of complete systems, TRAPO AG supplies modular High-Performance-Pick & Place-Systems that combine components such as robots, frame units, camera systems and conveyor technology. The modular system can be adapted to different framework conditions and thus covers almost any application. The TRAPO HPPS series forms the heart of the modular picker cell. The high-performance picker line combines maximum performance, individual TRAPO gripper technology and proven know-how, for example in the field of hygiene design.

This stacking solution grid | XtremeStack uses the existing space intelligently to integrate the maximum number of grid | Xtreme VR top terminal batteries to save space in a complete system and optimize footprint. The grid | Xtreme VR pure lead batteries assembled in a grid | XtremeStack rack require up to 10% less floor space than a lithium-ion solution. High space-saving solution: In comparison to conventional racks there is place for 20% more batteries in the same area. grid | XtremeStack is both horizontally and vertically expandable and adapts flexibly to customers’ needs.

Can be dismantled in three parts so can be used from out of the building without a core drill, i.e. for FTTX, gas connections Pneumatically driven hammer bore head assembly is ideally suited for alternating soils. If the hammer bore head meets with resistance (larger rock inclusions, solid rock, rubble deposits or brickwork), the hammer effect is activated automatically. The complete system with hydraulic power unit and mixing unit MA09 can be placed on a small trailer for safe transportation. Can be dismantled Portable Can be applied from out of a building

The Sensistor ILS500 is a fully integrated leak testing system that controls tooling, tracer gas handling, test sequencing and leak testing — all behind an easy to use color touch screen display. The compact instrument helps you get a fast start for your leak testing by guiding you through the setting of parameters. It controls the gas handling so that you have gas at the right time, the right place and at the right pressure. It makes a gross leak test before spending any tracer gas unnecessarily and also assures that the used tracer gas is evacuated after the test. The tooling in your fixture is controlled by the ILS500, and the complete system is able to execute orders from a PLC or other type of computer. With the dual probe possibility, you are even able to first leak test an object with the automatic probe and immediately thereafter do leak locating with the hand probe. The Sensistor ILS500 is the perfect system for solutions ranging from manual sniffing to being a key...

Crane Rails (A series A45/55/65/75/100/120/150) Light Rails (S10/S14/S18/..) Train Rails Grooved Rails Traverse system (Pre-stressing Wires.) Complete with fastenings systems, pads.

Lime and corrosion are hidden cost factors. Inevitably, these two “enemies of temperature control channels” prolong the cooling time, reduce the process safety and have a negative influence on the parts’ quality. The problem occurs insidiously in each plastic processing company, because lime and corrosion gradually build an insulation layer in the cooling channels and are thus responsible for a deteriorating heat transfer. Often the problem is not recognized until the demanded parts’ quality cannot be achieved any longer or if the complete system breaks down. The effect of cleaning the cooling channels of an injection mould is a reduction of cooling time up to 40 % (in individual cases even more), depending on the amount of deposits. The latest development, easy to use by the processor himself, is moldclean, a compact appliance which cleans polluted cooling channels in injection moulds and heat exchanger systems.

Temperature controllers of the teco series cd are designed for the operation with water and direct cooling up to 95 °C or 120 °C. The temperature of the process water is controlled automatically. A temperature sensor, installed inside the unit, measures available actual temperature. The microprocessor control with membrane keyboard or touchscreen operation compares measured value and preselect set value and controls heating or cooling. A trouble free operation is guaranteed by a complete safety system.

You manufacture sensitive electronic products, such as power semiconductors, diodes, diesel injectors and components for medical equipment. For casting purposes, you need systems that guarantee perfection and absolute freedom from voids with minimum casting quantities. Our Micro Casting Systems: Accuracy: Absolutely error-free casting of the smallest quantities; casting quality tolerance less than 0.01 g. Flexibility: Suitable for highly filled, abrasive casting resins under vacuum or atmosphere. Control: Patented dosing control unit for plant and process monitoring; glass cylinder design also allows direct observation of the preparation process.Compatibility: Modular design; cell construction makes it ideal for integration into existing production lines.

Assembly of plant components and machines We assemble plant components and complete machines including electrical wiring, pneumatics and hydraulics in our factory buildings. Our 55 specialists in the assembly departments are waiting for your challenge. Key features own production of large diameter pipelines Performance of surface coatings Complete systems or components Series or individual assembly Electric, pneumatic and hydraulic function test on test bench Advantages all from one supplier installation-ready dispatch Handling of large components up to 400t total weight Factory commissioning personal contacts

Efficiency thanks to flat strip The use of flatness measurement alone without control already achieves a noticeable increase in productivity because strip breaks can be effectively prevented or the mill can be operated at the maximum possible speed for the particular unflatness. If the mill has the necessary adjusting elements, the Automatic Flatness Control (AFC) results in an effective improvement in quality. Control results of ± 4 I-units referred to the respective nominal curve are realistic. With our detailed know-how of the interplay between measurement, control and rolling mill we are on of the few manufacturers able to supply complete control systems for the strip shape – from the sensor through to the control of the adjusting elements From the pivoting of the rolls through to the combination of pivoting, bending, shifting of the intermediate rolls and zone cooling and far more – we have a command of the whole spectrum of shape control.

Automate your feed axes using the SeGMo positioning system from Lenord+Bauer! A simple integration into your plant control system enables you to boost system efficiency in format changes and save time and money. The SeGMo drives are complete mechatronic systems with a batteryless multiturn absolute rotary encoder, gear and motor as well as integrated power and control electronics. • Positioning drive with through hollow shaft • Batteryfree multiturn absolute encoder • Aluminium housing • Optionally with cULus component recognition

WITT offers high-quality gas mixers / gas blenders and gas metering systems for two or more gases, for high flow rates and highly fluctuating gas withdrawals. You can choose between various options: According to your requirements, WITT gas mixers / gas blenders are available for nearly all technical gases and flow rates: for the optimal gas mixture for welding applications, the required gas concentration for food packages (modified atmosphere packaging = MAP) or the production of synthetic air for medical applications. State-of the art mechanical or electronic gas mixing systems provide accuracy and process safety. You can also control your gas mixing systems conveniently via Intranet, Internet or mobile devices. Combinations of WITT gas mixers / gas blenders with other WITT quality products such as gas analysers are also possible. They can be manufactured as complete system solutions.