Clean technology - Import export

The modular, preassembled PERO N2 units are available at short notice for your specific application Thanks to its highly efficient process technology and low energy consumption, the N2 offers excellent cleaning results and high throughput. Operators can choos from a range of solvents in order to achieve best cleaning results for their specific tasks. The energy manager function enables operators to control the heating output for maximum energy efficiency. Cleaning with hydrocarbons or modified alcohols with a flash point > 55°C; halogenated hydrocarbons; other solvents on request Standardised and strong High efficiency High throughput combined with ourstanding cleaning quality Available as 1 and 2bath unit with loading of the unit via Manual charging unit Automatic charging unit Hall trolley

PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. PERO Centre of Competence in Königsbrunn in a dedicated area measuring 1,100 m², there are more than 15 separate units available for parts cleaning tests. In manufacturing plants, parts cleaning is one of the key activities along the production line. The productivity of a manufacturing plant is determined by the availability of the cleaning technology. At the PERO Centre of Competence, PERO specialists work together with operators to develop the cleaning method that best suits their needs.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

With the MiJET part cleaning system it is possible to keep workplaces clean and workpieces hygienically cleaned with the simplest technology. An electrical connection is not necessary. Only a compressed air connection is required to use the device. Application The actual task of the MiJET is to filter oily air. Chips of the work pieces accumulate in the container. Operators often tend to blow off finished workpieces into the machine. This quickly results in dirty working environments and poor air in the production hall. However, we avoid this by exhausting these fumes. Oils are trapped from the exhaust air and chips and coolants accumulate in the container.

Dichtungen für Waschgeräteschlauchnippel Category Hydraulic hoses and fittings / Cleaning technology / Jet clean fittings / Sealings for jet clean hose fittings Product number supplier 415480

Ferrules for drain cleaning hose black-clean Cover won‘t be removed Label: plain, without Category Hydraulic hoses and fittings / Tube cleaning technology / Ferrules for tube-cleaning hoses / For black-clean / Stainless steel Product number supplier 423150600v

Ferrules for drain cleaning hose black-clean Cover won‘t be removed Label: plain, without Category Hydraulic hoses and fittings / Tube cleaning technology / Ferrules for tube-cleaning hoses / For black-clean / Stainless steel Product number supplier 423150600v

Ferrules for drain cleaning hose blue-clean Cover won‘t be removed Label: without, plain Category Hydraulic hoses and fittings / Tube cleaning technology / Ferrules for tube-cleaning hoses / For black-clean / Steel Product number supplier 423140500

Ferrules for drain cleaning hose blue-clean Cover won‘t be removed Label: without, plain Category Hydraulic hoses and fittings / Tube cleaning technology / Ferrules for tube-cleaning hoses / For black-clean / Steel Product number supplier 423140500

This manual vertical slicer offers you a unique high-end performance package. Simplify your processes with the intelligent support SmarterSlicing: The digital display will automatically indicate you when it's time to clean, sharpen or maintain the VSP. Your benefits: You ensure high quality of your products and optimize your processes. The VSP offers you more than just average. Its innovative Smarter slicing functions support you in obtaining perfectly sliced fresh products at any time. An early warning system by means of indicators will notify you when the VSP is due for cleaning, sharpening or maintenance. Smart technology to ensure the availability of your machine. Yet another highlight for you: You centrally control the SmarterSlicing function and log the data. The ideal basis in order to optimize your processes in the long term. The FoodConnect interface and the RetailControl management software make it possible.

KIRSCH Kunststofftechnik specialises in (re)shaping transparent plastics with high optical quality. In our 4 different forming-furnaces we can process panels and components up to 3000 x 2000 mm of size. Special filtration technology, cleanness and experience contribute to form the transparent panels without dust inclusions. Our furnaces are equipped with modern controls to target individually required heating and cooling curves for each plastic. Thus, we can achieve not only an exact temperature during forming, but also control the cooling process accordingly to accomplish a nearly distortionless plastic. We can process plastics two-dimensional, as well as three-dimensional.

With flexible edge extraction. Operation selectable: left, right or both sides. 2 sockets on each side – 2 x 230 V and 2 x 400 V. With consistently welded niche for two or three Multi-Line 65 devices (on-site). Mobile on 4 castors (2 lockable). Incl. front sided glass splash guard, extensions with cutouts on both sides and GN-insets. Vapors are extracted on three sides and passed through the patented ACS – circulating air system. High performance grease separators (100 % flame arresting) are installed in left and right side walls along with two removable grease collection trays. The substructure contains low-noise radial fans. Cleaning odors with patented plasma technology in combination with activated charcoal filters. The ACS meets the requirements of VDI 2052 and is TÜV-certified to DIN EN 60335. Furthermore all components meet DIN, VDE, GS and TÜV.

KAMAT's own filter technology is innovative and fast-growing. Why are we involved in filter technology? The answer is simple: high pressure cleaning technology using water as an environmentally friendly medium requires a high quality filter and recycling solution. In some cases, traditional filter manufacturers are unable to meet these requirements, which is why KAMAT also offers its own customer-specific solutions in the field of filter technology. High-pressure water cleaning technology has many advantages: A water jet can be used gently on the surfaces to be cleaned, water is generally available as a medium and at the same time is environmentally friendly without extensive delivery costs. When it comes to accessories, high pressure cleaning systems have special requirements that are difficult to meet. For this reason, KAMAT has developed its own customised high-pressure filter solutions. KAMAT high pressure filters are available for operating pressures up to 4,000 bar.

The SMS thin film evaporator type HYVAP serves the increasing demand of the pharmaceutical industry for continuous concentration of heat sensitive, viscous and fouling products. Hygienic design for the pharmaceutical industry The HYVAP is a horizontal thin film evaporator that allows easy access and inspection of the interior and controlled and reliable CIP cleaning. The technology of the HYVAP combines the proven advantages of our conventional horizontal thin film evaporators DKH with the following new features: • Cantilever rotor design • Comfortable rotor extraction • No bearing in product space • Mechanical seal in hygienic design • Electro-polished surfaces • Sight glasses for inspection during operation The new HYVAP DZH offers the hygienic design that meets current GMP requirements. The evaporator sizes range from 0.1 m2 for laboratory to 2.0 m2 for industrial applications. LP steam as well as hot water can be applied as heating media.

The blueglobe CLEAN Plus is the first cable gland to be certified to the high EHEDG standard and therefore can be used without risk in the food, pharmaceutical and chemical industries and in clean room technology applications. BGN also confirmed conformity of this cable gland with the relevant applicable testing specifications in test certificate NV 13132. The cable gland blueglobe CLEAN Plus has no cavities, gaps or external threads but has a smooth surface (roughness Ra < 0.8 μm) and rounded surfaces in contact with the wrench. PFLITSCH uses high-grade stainless steel 1.4404/AISI 316L to manufacture this product. All seals are made from plastics that comply with FDA 21 CFR §177.2600 and are suitable for being in contact with food.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

The KLN BATCH-INLINE cleaning system is based on many years of experience with Inline Cleaning systems for the electronics production and unites, for the first time, the technological advantages of Inline cleaning with low space requirement of a Batch system. By far, most of the Inline cleaning systems in Germany for the large-scale production “Automotives” and “alternative energy” come from company KLN. This system was developed to make the efficient Inline cleaning technology available now also for customers with smaller budgets and throughputs.

Individuality and problem-solving are our strengths The PERKUTE system offers solution for every requirement in industrial cleaning technology. Many special solutions could be developed because of the wide product range. We have compiled some reference examples of already implemented special solutions. Special Solutions/ application examples Conveyor machine TW 103 with handling equipment "For cleaning closing thrustor in time of the machine center" Conveyor machine TW 108 with return transport passage "Cleaning of synthetic material boxes" Dip facility TL - 70T "Cleaning of valve cases" Conveyor machine TW 101 with feed system and delivery "Cleaning of hollows" Spraying cleaning facility FR-130H "Cleaning of goods carrier" Spraying cleaning facility FR-90H "Cleaning of store cages in bulk baskets" Spraying cleaning facility RC 82 "Cleaning of drawing dies with with 100 bar"

The extensive power spectrum of this solid production series in combination with the standard equipment coordinated optimally sets new standards in cleaning technology. The solid interpretation of the machine components connected with the modern design of the easy-care machine case completes the innovative machine concept. By the choice of specific accessory articles many possible applications open up. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Compact and sturdy construction Modern design Powerful washing pump High permissible basket load Low water pressure switch as dry-run protection Tank cover in the return flow, filterbasket incl. Programmable operation operating counter incl. Housing insulation Loading carriage incl. Grate bearing Digital temperature indication Electronic basket drive (PF 100; PF 150) Square blast pipe system (PF 200) Rotation blast pipe system (PF 300) Adjustable feed

The JET One prints on plastic, glass, wood, metal, ceramic, technical composites, cardboard and paper, without contact, and with fixed and variable data: such as use-by dates, LOT/batch numbers or even graphics. From every position and in every direction. Forward, backward, mirrored or rotated. Even different product surfaces – whether convex, concave, rough, smooth, flat or relief-molded – pose no challenge at all for the JET One. Equipped with the automatic SEALTRONIC nozzle sealing system, the JET One is ready to print in just a few seconds and always begins with a clean print image. This unique technology worldwide ensures 100% protection against ink drying out – even after prolonged downtime. Time-consuming and labor-intensive rinsing cycles and daily servicing are eliminated. And printer-related production losses are a thing of the past.

With the METRO G/F/R material loaders, large quantities of granulate, dusty regrind and flakes can be conveyed automatically to the hopper of a processing machine, drying bin or day bin. Filters with sophisticated cleaning technology and large outlet flaps guarantee trouble-free operation. Via the hinged lid, free from vacuum and material hoses, the loaders can be quickly and easily cleaned during material changes.

The regenerative thermal oxidizer from Venjakob Umwelttechnik with its low consumption of primary energy is particulary well suited to the removal of low to medium concentrations of solvend based pollutants (VOC). This machine is characterized by: The regenerative thermal oxidizer (RTO for short) embodies the state of the art technology for cleaning organic pollutants from exhaust gases (including VOCs). The systems ordinarily feature three alternately supplied heat exchanger chambers equipped with ceramic honeycombs. This material is suitable for absorbing, storing, and transferring very high amounts of heat. This allows a heat exchanger efficiency of over 95% to be achieved, so that the process temperature above 800 °C, which is required for the pollutant conversion, can be reached with a minimum of additional energy. Consequently, depending on the combustion heat of the pollutants to be cleaned, autothermal operation can be accomplished for most applications without the need for additional fuel. With careful planning, the excess heat of combustion can be effectively utilized so that the overall system can be viewed as an energy source rather than as an energy consumer. We can offer a variety of special solutions depending on the application:

3DMicromac‘s highly versatile microFLEX™ product family is the all-in-one solution for manufacturing flexible thin films in photovoltaics, electronics, medical devices, displays, and semiconductors. The production systems can handle various substrates, material thicknesses, and types such as polymer films, stainless steel, and thin glass. The microFLEX™ systems combine high precision laser processing with cleaning and packaging technologies, as well as inline quality control. Due to its modular concept, various customized solutions are available, reaching from industrial mass production to pilot lines as well as applied research. High throughput and efficiency on-the-fly processing; high machine uptime; multiple tension controllers; contactless substrate guiding Highest flexibility easy machine layout modification by modular concept Cost advantages Long term security of investment; reasonable cost of ownership; easy to upgrade and modify; different micro environments.

CLEAN TUBE is used as soon as hygiene plays an important role. CLEAN TUBE'S innovative technology has a antibacterial effect and has reduces the groth of bacteria by more than 99,9% Particularly practical: The antibacterial effect is directly integrated into the tube. Of course, clean tube is completely safe for your health and provides reliable protection and safety over at least 10 years.

CLEAN TUBE is used as soon as hygiene plays an important role. CLEAN TUBE'S innovative technology has a antibacterial effect and has reduces the groth of bacteria by more than 99,9% Particularly practical: The antibacterial effect is directly integrated into the tube. Of course, clean tube is completely safe for your health and provides reliable protection and safety over at least 10 years.

Many years of expertise in system engineering for industrial cleaning technology Suitable for processes such as precleaning, postcleaning, conserving and drying Mobile and stationary multichamber cleaning systems for aqueous cleaning media Standardized or individual solutions tailored to the needs of the customer Manual or fully automated concepts Subsequently extendable and expandable Low operating costs with high availability Can be combined with stoba ECM/PECM systems Controller Siemens

RAFI Eltec has over 20 years of experience in the special technology chip-on-board. That gives us a profound understanding of processes and quality in the standard technologies and beyond. As a result, we meet your requirements for flexible and reliable implementation of technically sophisticated solutions. We even set new standards. CHIP-ON-BOARD TECHNOLOGIES • Chip-on-board bonding • Chip-on-chip bonding • Chip-on-flex bonding • Flip chip TECHNOLOGIES IN THE CLEAN ROOM • Die bonding • Wire bonding (aluminum wire bonding and gold wire wedge-wedge bonding) • Glob top casting • Optical casting • Application of HF seals