Ceramic materials - Import export

high resistance to moisture can be treated with ceramic materials

We are your reliable partner for the procurement and processing of technical ceramics, e.g. Oxide ceramics (alumina, magnesia, zirconium oxide) and non-oxide ceramics (with carbide or nitride). Technical ceramics - also called industrial ceramics or industrial ceramics - have unique material properties and are therefore one of the most powerful materials available. We offer the following ceramic materials and parts: Semi-finished products: Rods, pipes, flat material, etc. Laboratory parts: bowls, crucibles, etc. Finished parts: Drawing parts of all kinds according to customer requirements

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

The B+B pressure sensors are suitable for pressure measurement of gaseous and liquid media. They are based on the approved thick-film technology as well as the resistant carrier materials ceramic and stainless steel.

Surface treatment with laser with a broad spectrum of applications (improved thermal conductivity, anti-icing / freezing, anti-friction, anti-wear, lubrication, anti-microbial, reduced electrical resistance e.g. for connectors, holograms, product protection, logos, wettability, increase surface area by up to 280% ...). Can be used for metal (steel, aluminum, titanium) polymers / plastics (e.g. polycarbonate), composite material and ceramics

The Hiresta – UX measuring device is used to measure semiconductors or non – conductors (insulators). Measuring range of 10^3 – 10^14 Ω . The Hiresta UX is specialised in measuring the resistance, the surface and volume resistivity of various substances and materials of all shapes and sizes in the high-resistance measuring range. For measurements related to the ASTM D257 / ISO 2951 / JIS K 6911 standard of: antistatic materials flooring materials paper, packaging materials paints, pastes, paints fibers, clothes, fabrics adhesives, greases glass, concrete, ceramics plastics, film materials, foils etc. Up to 2000 measurement results can be exported to USB memory stick The conductivity meter impresses with its compact design, a color 7.5 “TFT touch display and user-friendly menu navigation.

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Highly effective due to actively cleaning substances Modern cleaner on a solvent base Fast and residue-free evaporation of the cleaner

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Highly effective due to actively cleaning substances Modern cleaner on a solvent base Fast and residue-free evaporation of the cleaner OKS 2660 is suitable for use with the OKS Airspray system Also available as spray version OKS 2661

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system

Degreasing all surfaces and parts of non-absorbent materials, e.g. metals, ceramic or plastics and elastomers Cleaning of adhesive surfaces for coatings, paints or adhesives and sealants Cleaning of friction surfaces on which high friction forces are transmitted such as clutch and brake linings (brake cleaners) Removal of aged and gummy oil and grease residues, of residues of brake fluids and silicones, as well as of residues of simple coatings, adhesives and sealants Advantages and benefits Modern active cleaner on the basis of a solvent mixture Highly effective due to actively cleaning substances Better initial dissolving of soiling than at brake cleaners thanks to longer soaking-in period No formation of condensate on the material surface OKS 2610 is suitable for use with the OKS Airspray system Also available as spray version OKS 2611 (propellant gas CO2)

The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: width: 8 - 120 mm, thickness: 2 - 10 mm.

The base material is ceramic staple fibres. Necessary for spinning the ceramic fibre is a carrier. The carrier material decomposes at 200 °C. When the material is heated up for the first time smoke development and a flaming up is noticeable. The core made from chromesteel wire Provides strength when the carrier material has decomposed. When used under stress, the carrier material determinesthe temperature limit. Available dimensions: 3 - 30 mm.

Short description: Hochtemperaturbeständig High-temperature-resistant and strong silicone adhesive and sealant. Especially suited for heat-loaded, elastic adhesive bonding and sealing. Very good adhesion on steel, aluminium, glass, ceramic and many other materials. Applications: Industrial furnaces, Flue gas boxes, Heating facilities, Exhaust pipes and Heating cabinets and furnaces. The outstanding product properties (e.g. permanent elasticity) are maintained in the entire temperature range from -60°C to +300°C. Properties: High temperature resistance up to +300°C, Very good UV stability, Excellent resistance to weathering and aging, Good chemical resistance, Elongation to break approx. 500% and Colour: red.

Surface treatment with laser with a broad spectrum of applications (improved thermal conductivity, anti-icing / freezing, anti-friction, anti-wear, lubrication, anti-microbial, reduced electrical resistance e.g. for connectors, holograms, product protection, logos, wettability, increase surface area by up to 280% ...). Can be used for metal (steel, aluminum, titanium) polymers / plastics (e.g. polycarbonate), composite material and ceramics

Dr. Paul Lohmann® offers Magnesium Oxide as powder, micronized powder in food/pharma grade as well as for food supplements. For pharmaceutical applications, it is used for the treatment of hypomagnesemia. For food applications, it is used as acid regulator and for magnesium fortification. For industrial applications, it not only serves as a magnesium raw material for glass ceramics, but is also an efficient carrier for peroxides and persulfates. CAS 1309-48-4 EINECS 215-171-9 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

AMROC Color-Primed is the product version used for customized finish painting at the construction site. The product AMROC Color-Primed is ideally suited for applying the finished paint coat to the facade at the construction site. The front facing side and edges are primed in RAL 9010 (white) and the rear facing side is finish coated in RAL 7035 (light grey). The finish coat that is applied at the construction site creates vapor diffusion equilibrium between the front and rear facing sides. The factory applied primer does not yet completely seal the front facing side. The finish coat must be a paint-manufacturer-approved paint that is weather proof and alkaline stable. We recommend Amphibolin ELF made by Caparol for this purpose. AMROC Color-Primed is also suitable for: Flooring for wet spaces to be surface treated with ceramic materials, or similar Walls in wet spaces that will be surface treated with ceramic materials.

The LMK 458 has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 125 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. The basis for the LMK 458 is a capacitive ceramic sensor element designed by BD\SENSORS, which offers a high overload resistance and medium compatibility. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.1 %) FSO — diameter 39.5 mm — high overpressure capability — high long term stability — shipping approvals: ABS, BV, CCS, DNV, GL, LR Optional Features: — IS-version — diaphragm pure ceramic (99.9% AI2O3) — different housing materials (stainless steel, CuNiFe) — screw-in and flange version — accessoires

Stainless steel gear pump for the delivery of alcohols, isocyanates or gels. The exact volumetric dosing of this series guarantees a low-pulsation and constant flow rate. Due to its compact size and high precision, the CHEM MINI is ideally suited for use in laboratories. Parts in contact with the medium can be made of stainless steel or ceramic materials. The series is available in sizes from 0.2-9-5.5 to 2.95-14-28, other sizes are also available on request. The range of application covers classic transfer and dosing tasks in the chemical and pharmaceutical industry. Due to decades of design experience and optimum material selection, this pump type is suitable for even the most difficult tasks and convinces by its reliability and dosing accuracy in vacuum applications.

Chemical pump with electrical temperature control. The CHEM series is designed to be easy to maintain. Separate pump covers allow a quick inspection of the inner workings from both sides of the pump. To adjust the axial clearance we use shims which can be varied according to process parameters. Chemical pumps of the CHEM series are offered as standard versions with components made of stainless steel or as special versions with coated or ceramic materials. To bring or maintain the pump at process temperature, two temperature control variants can be used, electric and hydraulic.

Witte chemical pumps are used as dosing pumps for a variety of fluids. Pumps of the CHEM series are designed and assembled exclusively at the Tornesch site, thus guaranteeing highest reliability and quality. For all our series we offer a comprehensive spare parts service on request. In addition, we also install the pumps directly at our customer's plant. Dosing pumps of the CHEM series are extremely flexible in their design and can be offered in various variants and equipment thanks to a modular system. Differential pressures up to 120 bar, suction pressures vacuum up to 15 bar Temperatures up to max 500 °C in combination with a magnetic coupling. Viscosities up to 1.000.000 mPas or higher Components made of stainless steel, ceramic and special materials Flow rates from 20 l/h to 170,000 l/h

The drawing cones are characterised by an extremely good wear behaviour, high density, as well as fine-grained structure and a very smooth and pore-free surface.

Best quality, grinded and polished with an excellent surface

The narrow band IR filters of the MPS4SENS 3C-2 carbon dioxide enhance the measurement of carbon monoxide (CO) (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CO2) (CWL: 4415 ± 30, HBW: 60 ± 10 nm) and carbon compoundsn (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector covers a wide range of applications in aerospace, medical, industry and environmental technology at ambient temperatures between -20 and 85 °C. Only Micro-Hybrid develops and manufactures 4-channel pyroelectric detectors with a thin film membrane made of ceramic pyroelectric material in a TO39 package. This high performance material gives the detector a very high detectivity of up to 4.0*10^8 cm√Hz/W and a high sensitivity of up to 200000 V/W. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.

The four-channel pyrodetector is optimized for gas analysis during anesthesia by four optical filters for the following gases: carbon dioxide (CO2) (CWL: 4265 ± 25, HBW: 120 ± 10 nm), nitrous oxide (N2O) (CWL: 4525 ± 20, HBW: 83 ± 6 nm), desflurane (CWL: 8224 ± 40, HBW: 240 ± 24 nm) and isoflurane (CWL: 8550 ± 40, HBW: 180 ± 18 nm). Medical, especially patient and anesthetic gas monitoring, represent typical application fields for the MPS4SENS anesthesia. The pyrodetector is designed for applications in environments ranging from -20 to 85 °C. The very high detectivity of up to 4.0*10^8 cm√Hz/W as well as the very high sensitivity of up to 200000 V/W provide an extraordinary signal quality in the field of pyroelectric detectors. The quad detector is based on 4 sensor chips with a thin film CPM membrane. Thanks to the Ceramic Pyroelectrical Material (CPM) and the unique product design the detector convinces with a high read-out rate up to 100 Hz as well as with the short response time.

The 2 channel premium pyrodetector is specially designed for the analysis of nitric oxide (NO). The optical filter with a CWL of 5300 ± 30 nm and a HBW of ± 20 nm as well as an additional reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm) optimize the measurement results of the dual IR detector. Its main application lies in the measurement of process gases or exhaust gases in industrial production and process engineering. Storage and operation can take place between -20 and 85 °C. The particularly high detectivity of up to 4.0*10^8 cm√Hz/W as well as the very high sensitivity up to 200000 V/W provide an extraordinary signal quality in the sector of pyroelectric detectors. Two sensor chips with a thin film CPM membrane form the core of the dual detector MPS2SENS nitrogen monoxide. Thanks to the Ceramic Pyroelectrical Material (CPM) and the unique product design the detector features a high read-out rate up to 100 Hz as well as a short response time.

The highly sensitive pyroelectric quad detector allows the combined measurement of carbon monoxide (CWL: 4650 ± 40, HBW: 180 ± 20 nm), carbon dioxide (CWL: 4265 ± 25, HBW: 120 ± 10 nm) and carbon compounds (CWL: 3400 ± 20, HBW: 140 ± 20 nm) with reference channel (CWL: 3910 ± 28, HBW: 70 ± 10 nm). The detector can be used at ambient temperatures between -20 and 85 °C in numerous applications in aerospace, medical, industry and environmental technology. Micro-Hybrid is the only manufacturer of 4-channel pyroelectric detectors with a high performance membrane in a TO39 package. The very high detectivity of up to 4.0*10^8 cm√Hz/W and sensitivity of up to 200000 V/W is achieved by the pyrodetector MPS4SENS 3C-1 carbon dioxide due to the chips with a thin film membrane made of ceramic pyroelectric material. The unique detector design of Micro-Hybrid enables the high read-out rate up to 100 Hz as well as the short response time for reliable measurement results in NDIR gas analysis.