Case system - Import export

Stackable and connectable with Classic-Line and T-Loc systainer® Securely package and organise work materials and tools for space-saving transport An optimal choice for cleverly storing tools or insulating sensitive contents with many covers and base inserts to choose from * The exterior dimensions are measured without the feet: H + 7 mm Outside dimensions H* 210 x W 396 x D 296mm Inside dimensions H 180 x W 382 x D 266 mm Weight: 1,80 kg * The outside dimensions are measured without feet: H + 7 mm

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

The Riedel CCP-1116 is a commentary unit for two commentators with integrated intercom functionality. The device provides up to two commentary positions with high-quality mic preamps and all the intercom features known from Riedel Digital Matrix Intercom systems. Combined in one compact device and cabled via one single CAT5 or COAX cable, the CCP-1116 reduces cabling effort, set-up time and points of failure. In addition the CCP-1116 provides a clearly arranged user interface with improved functionality at the commentary position including programmable buttons for communications and GPIOs as well as remote control of the commentary panel. In the case of failure within the system - e.g. loss of the cable connection in between a CCP-1116 and the matrix – the stand- alone/emergency mode will be established without a loss of signal. ON AIR and MIC DIRECT OUT audio signals are available separately, and A/B combined at XLR outputs of the CCP-1116. AUX IN XLR inputs feed the Phones...

Suitable for transporting the pop-up system "STYLE 33 and 34". Convertible to a promotion counter.

The XXL cases are double-wall designed for extra stability and maximum product protection The XXL case version with more space Extremely strong blown double-wall case Sturdy hinge and lock system

Table top. Hot or cold combined in one plate. Temperature variable from – 5 °C to +110 °C. With Self-Cooling-System (refrigerant R600a). Casing chrome nickel steel 18/10, glass facing.

In December 2009 the new Machine Directive 2006/42/EC of the European Parliaments went into effect, and with it a number of new legal ordinances with which, among other things, the so-called "Functional Safety" of devices and systems is to be ensured. The goal is to limit the risk of endangerment of human beings, the environment, and investment goods. This is to be demonstrably achieved with systematic error avoidance, error detection, and in particular error control. All devices and systems, which can result in the death or injury of human beings, in catastrophic damage to the environment or in destruction, for example of production systems, in the case of an error must be classified as "safety-relevant". The applicable safety standards must then be applied during their design, development, manufacture and operation. Today we find safety-relevant systems in many industries supplied by Novotechnik's sophisticated, innovative products. In the industrial sector this is the case,...

Angular expansion joints absorb movements perpendicular to the bracing lane. The reaction forces caused by the internal pressure are absorbed by the hinge frame. In pipelines of larger nominal size and high pressure only tensioned angular expansion joints in the form of hinge-systems are able to absorb the expansion. Thus, for pipelines expansion joints are only installed as hinge-systems (combination of either 2 or 3 expansion joints). Those are L-, U- or Z-shaped. This requires additionally a 90 ° redirection of the pipeline. Thereby, stress due to inner pressure will be absorbed by the hinge tensioning. In case those systems cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed.. Types of design for angular expansion joints: Single hinge angular expansion joint for movements in one plane gimbal hinge angular expansion joint for omnidirectional movement

Lateral expansion joints absorb movements vertical to the bracing plane. The reaction forces caused by the internal pressure are absorbed by the joint mounting. Under internal pressure expansion joints generated pressure reaction forces. For a better understanding, the following considerations with different diamaters, pressures and resulting from it the forces: DN 150 -> 25 bar ~ 80 kN = 8 t DN 300 -> 10 bar ~ 100 kN = 10 t DN 1000 -> 1.5 bar ~ 130 kN = 13 t Due to high forces, movements in pipelines of higher nominal size and higher pressure can only be absorbed with braced expansion joints. Applying braced expansion joints pressure stress can be absorbed, while fixed bearings can be dimensioned smaller. In case a 3-hinge-system cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed. Types of design for lateral expansion joints: ball bearing types with tie rods for all-side movements cross hinged types for...

Forget everything you know about miniature gears. Dimensions, weight, precision – the new Power Gear Miniature sets new standards. PowerGear Miniature has a sensationally small installation size, an extremely light-weight aluminium housing, maximum performance and precision as well as many other advantages. The unique design of PowerGear Miniature will open up a vast range of applications in drive technology. miniature gear for maximum precision low backlash and high transmission accuracy case-hardened bevel gear tooth system friction-locked shaft-and-bevel-gear fit energy-efficient through high level of efficiency of 98% extremely light-weight aluminium housing maintenance free through synthetic oil

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Multi-layered insulation according to DIN EN/IEC 60900

• Containing approx. 110 insulated end-sleeves from 0.5 to 16.0 mm² • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Sortimo L-BOXX, plastic system case made of shock and impact proof ABS-plastic for more mobility • Seamless integration of the L-BOXX into the Sortimo Globelyst M system • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover

• Containing pressing pliers and the most popular insulated end-sleeves • For establishing solderless, electrical connections according to DIN • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• Containing quality tools • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Inset boxes for a variety of classification systems and divisions

• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Insulation according to DIN EN/IEC 60900 • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel

Due to increasing product counterfeiting, many manufacturers are forced to make their products tamper- and counterfeit-proof. Legal requirements exist in some countries for this purpose. Our TE model was developed for this task. The system enables single-sided and/or double-sided seal labeling of pharmaceutical folding boxes and can also be used in the cosmetics industry. During the development, special attention was paid to the protection of the packaging as well as the format range of the products to be processed. The basic version labels folding boxes with format widths (in the running direction) of 50-250 mm at an output of up to 300 folding boxes per minute. Models for processing wider folding cartons are based on the same line concept. As an extension, the model series is available as a combination system (TE-PV) with a b+b serialization module and b+b LineManager. In this case, the printer and camera system are integrated into the system.

You will find EPIC® rectangular or circular connectors in any machine and plant engineering or drive technology application used for measuring, control, regulation or drive. It is a flexible system consisting of casings, inserts, contacts and accessories which is perfectly suited to any requirement. Properties: — System components constructed to the highest standards, with optimal functionality and process reliability. — Extremely robust und easy to assemble. — Also suitable for bus and fibre optic connections.

The workstation enables the manual serialisation of pharmaceutical packs and their aggregation into shipping cartons. For this purpose, each individual box is first printed with order-related serialisation data by a thermal inkjet printing system and then manually placed in a shipping carton. As soon as this is filled, the downstream thermal transfer printer creates an individual serialisation label. The correct print data and print quality are monitored by a camera system. The operator places the drug packs to be labelled at a reference edge of the conveyor belt. As soon as the printer has printed the serialisation data, it is checked for correctness by the integrated image processing system. In case of an error, the product stops at a certain position, which is marked by red LEDs. Depending on the number of products in the shipping carton/number of aggregation levels, approx. 10-12 products/min are serialised.

For the conveying of filtered-out materials to silos or containers. Pneumatic low-pressure conveyor systems For the conveying of filtered-out materials to silos or containers and for conveying distances of up to 200 m. The conveying air stream is generated by one or more fans. Product description Pneumatic low-pressure conveyor systems can be implemented as a single-pipe system or a ring system. In the case of the single-pipe system, a final separator in the form of a filter or a cyclone is always necessary. In a ring system the conveying air is driven in the ring. In this case the silo or container acts as the separator. Light dust particles that are not separated in the silo or container initially remain in the circulation. With most materials the fine dust particles tend to attach themselves to the coarser ones and are thus separated with them. Hence, a concentration of the fine dust particles in the conveying stream is avoided as far as possible. The loading of the conveying stream essentially depends on the grain size, density and form of the material to be conveyed. As a guiding value, one may assume 250 - 300 g/m³. Higher loads are possible under certain conditions. In cases where there is a high amount of material, e.g. in planing works, where the splinters are directly removed and transported away for further use, this can also be realised with a ring system and several containers. Switchover takes place automatically when the container signals that it is full. Containers are exchanged during operation.

Spray walls and spray booths with dry separation via cartons. For lower utilisation times or overspray quantities RES dry spray booth For lower utilisation times or smaller overspray quantities, spray systems with dry separation offer a meaningful alternative to water-sprinkled systems. The Rippert modular spraying system type RES enables individual adaptation to the respective case of need. The filter system of the RES dry spray wall consists of individual square cardboard boxes. A sheet metal frame serves as a support structure for the filter box. In order to save costs, there is a possibility to vary the individual filter boxes in the spray booth, without exchanging all of the filter elements. Function The overspray is caught by the exhaust air stream and fed to the filter. The solids are filtered out here, while the cleaned exhaust air is blown out into the open air by the fan. Versions The basic version consists of a wall with a two-fold filter stage. Paper filter boxes form the first filter stage. A glass fibre fine filter arranged directly behind it represents the second filter stage. The attached radial fan is equipped with spark protection in the suction nozzle as well as an explosion-proof motor. The spray booth can additionally be equipped with removable or fixed side and ceiling panels. The RES dry spray booth is available in galvanised sheet metal or in stainless steel. Advantages Cleaning / maintenance The spray wall is designed such that the filter elements can be exchanged with little effort in a very short time. Once it is saturated, the filter box is removed from the sheet metal frame and disposed of in an environmentally-friendly manner.

Tool case for ipr-Safety Cutting Unit Internal foam protects the tool and is tailored in shape for the particular cutting head Waterproof, unbreakable, dustproof Easy opened two-stage closure Open-cell core with resistant wall construction – robust, lightweight O-ring gasket Diemension: 750 x 450 x 286 mm

ERC Flow Guard Premium is a flow enhancer with very good mixing behaviour for the use of diesel fuel and heating oil in the winter. THE EFFECT Heating oil and diesel fuel are already relatively winter-proof, but when it is very cold, the contained paraffins can separate and agglomerate. Consequently, they clog lines and filters, in which case the heating system or the engine no longer runs properly or can even shut down. THE RESULT ERC Flow Guard Premium contains so-called nucleating agents which are available in surplus in the cooling paraffin condensation cores. As a result, smaller growth crystals form instead of larger. The minuscule growth crystals can easily pass through lines and filters without causing clogging. In addition, a surface limiter envelops the paraffin crystals and keeps them in suspension. As a result, larger clumps cannot form at a later time, either.

ERC Flow Guard is a flow improver that burns ash-free for heating oil during winter use, and is also effective in heating oil with a bio share of up to 20 %. The Effect Heating oil is already relatively winter-proof, but when it is very cold, the contained paraffins can separate and agglomerate. Consequently, they clog fuel lines and filters, in which case the heating system no longer runs properly or can even shut down. Flow Guard, flow enhancer which burns ash-free, counteracts this. The additive keeps paraffin crystals small and the heating oil retains is filtration and flow capacity.

Energy storage systems (ESS) are an essential part for modern, environmental-friendly and energy-efficient ship propulsion systems. By using different ship operating modes, the energy balance can be significantly improved and thus, the fuel consumption and the emission volume can be reduced or in case of fully electric systems, emission can be even completely avoided. By using an energy storage system, the combustion engines operate mainly within the optimum speed and load range and this reduces the maintenance costs. Furthermore, the redundancy of electrical and common propulsion drives minimises immensely the blackout risk. In the field of energy storage, the battery storages belong to the most common and most efficient storage systems. Safe and reliable energy storage due to PBES CellCoolTM Liquid Cooling Maximum power and performance due to high performance XALT Lithium-ion cells (3C rate) Modular cell exchange concept (CellSwapTM) ensures easy renewing of old cells