Case system - Import export

Stackable and connectable with Classic-Line and T-Loc systainer® Securely package and organise work materials and tools for space-saving transport An optimal choice for cleverly storing tools or insulating sensitive contents with many covers and base inserts to choose from * The exterior dimensions are measured without the feet: H + 7 mm Outside dimensions H* 210 x W 396 x D 296mm Inside dimensions H 180 x W 382 x D 266 mm Weight: 1,80 kg * The outside dimensions are measured without feet: H + 7 mm

Helical bevel gear units with 90° input and output axis range. Casing with feet, flange F options. A rigid structure in case. System resistance calculations are made in accordance with ISO, DIN and NIEMANN standards. Different input options may be provided (Coupled motor, IEC, PAM, W, Servo motor connected, ...). Different output options available (Solid shaft, Hollow shaft, With shrink disc, ...).

In case of a contaminated cooling system, it is recommended to first clean the cooling system with Lindemann Radiator & Block Flush. As a result, Lindemann Radiator & Block Stop Leak will work optimally

Fast, safe and convenient car parking. Faster parking for added flexibility Parking spaces are in short supply! When space for access ramps becomes an issue, we provide the optimal solution. The hydraulic car elevator TRAFFICO transports both car and passengers quickly and reliably to the desired parking level. A wide selection of options is offered for this classic car lift to meet individual requirements. Convenience important? The most convenient way to initiate operation is by remote control or smart card. The reader can be installed next to the lift entrance on a pedestal, for example, with pull wire switches at each level. Light beams between the cabin and shaft doors avoid any damage to the car during entry and exit. Light barriers facilitate vehicle positioning, thereby speeding up access. In the case of systems with two stopping points, the journey to the other level commences automatically as soon as the vehicle is positioned correctly.

The Riedel CCP-1116 is a commentary unit for two commentators with integrated intercom functionality. The device provides up to two commentary positions with high-quality mic preamps and all the intercom features known from Riedel Digital Matrix Intercom systems. Combined in one compact device and cabled via one single CAT5 or COAX cable, the CCP-1116 reduces cabling effort, set-up time and points of failure. In addition the CCP-1116 provides a clearly arranged user interface with improved functionality at the commentary position including programmable buttons for communications and GPIOs as well as remote control of the commentary panel. In the case of failure within the system - e.g. loss of the cable connection in between a CCP-1116 and the matrix – the stand- alone/emergency mode will be established without a loss of signal. ON AIR and MIC DIRECT OUT audio signals are available separately, and A/B combined at XLR outputs of the CCP-1116. AUX IN XLR inputs feed the Phones...

ADLER is the specialist when it comes to wood preservation and wood paints and varnishes. Work at the ADLER factory on the development of water-thinnable wood finish products for wooden constructions had already commenced 20 years ago. Over the years these have been continuously improved. At the same time the raw materials were further developed and the latest product family was created: The Lignovit range. Using these water-thinnable, thin-film wood finishes, professionals could give the ADLER value addition to their wooden construction. Rely on material of the future wood and give your customer the beauty and quality of this natural raw material. Based on the motto "Grow together", ADLER now provides its know-how, well-developed and seasoned concepts and experience to master carpenters and industrial producers. With the help of the ADLER wood finishes of the Lignovit family, you have, in any case, a system available that does justice to your high demands on quality, beauty and...

The front door not only acts as an important architectural design element, however, but is also expected to offer protection against the wind and weather. Heat, cold, damp and UV radiation from the sun, as well as wood-destroying fungi, are constant sources of stress for front doors. Under these aspects, ADLER has developed a highly technological and particularly resistant painting system. The new all-round improved Aquawood Protor System has allowed new standards to be set in the front door coating sector. The new generation boasts extraordinary scratch resistance, even greater hardness, excellent economy and more efficient drying. With Aquawood Protor, ADLER provides an innovative system, which meets the highest quality demands, whilst being easier to process and reducing material costs – ALL IN ONE. In the case of this system too, ADLER naturally builds on decades of experience in the research and development of water-thinnable surface coatings.

Suitable for transporting the pop-up system "STYLE 33 and 34". Convertible to a promotion counter.

Table top. Hot or cold combined in one plate. Temperature variable from – 5 °C to +110 °C. With Self-Cooling-System (refrigerant R600a). Casing chrome nickel steel 18/10, glass facing.

The XXL cases are double-wall designed for extra stability and maximum product protection The XXL case version with more space Extremely strong blown double-wall case Sturdy hinge and lock system

Radial fans are an indispensable part of most operational processes in ventilation systems. In cases where extremely large volumes need to be moved or transported, or where a critical impeller mass is exceeded, radial fans with bearings at both sides are an ideal choice. This type of equipment is available in single-flow and double-flow versions. However, the robust design of Scheuch COMPONENTS radial fans makes it possible to achieve large volumetric flows even with unilateral bearings (i.e. single-flow systems). Bearings can be provided on both sides if requested by the customer, and this configuration is implemented as standard above a critical impeller mass. With their flow-optimized suction pockets, double-flow radial fans make it possible to create efficient designs for transporting and diverting conveyed media – even when space is tight. Altogether, there are various factors and criteria that make double-flow radial fans a favourable option.

In December 2009 the new Machine Directive 2006/42/EC of the European Parliaments went into effect, and with it a number of new legal ordinances with which, among other things, the so-called "Functional Safety" of devices and systems is to be ensured. The goal is to limit the risk of endangerment of human beings, the environment, and investment goods. This is to be demonstrably achieved with systematic error avoidance, error detection, and in particular error control. All devices and systems, which can result in the death or injury of human beings, in catastrophic damage to the environment or in destruction, for example of production systems, in the case of an error must be classified as "safety-relevant". The applicable safety standards must then be applied during their design, development, manufacture and operation. Today we find safety-relevant systems in many industries supplied by Novotechnik's sophisticated, innovative products. In the industrial sector this is the case,...

The radial fan is the core component and driving force of any ventilation system. In this case, the drive takes the form of an elastic coupling acting on the intermediate shaft – without the kind of upstream transmission that would be found on a belt drive. In situations involving larger dimensions, the fan components can be embedded into a concrete foundation instead of a steel bracket. Radial fans with coupling drive can be used in diverse applications across a range of industries and sectors. This type of fan is particularly well suited to situations involving high motor power. The coupling (generally a claw coupling with an elastic insert) can absorb shocks and torsional vibrations, thus protecting the material. Furthermore, an offset (angular, parallel or axial offset) between the motor shaft and intermediate shaft can be compensated to a certain extent, which means that the motor is relatively easy to dismount.

PORTABLE INKJET MARKER MOD. FPA2-SMART MOB - MAXIMUM PRINTING HEIGHT 12.7 mm New portable inkjet marker, suitable for marking on porous, semi-porous (boxes, cardboard boxes) in different work stations. Allows to print alphanumeric texts, logos, date/time, codes, counter, lot and 1D & 2D barcode, distributed on 4 lines with a total height of 12.7 mm. The marking speed is set directly on the marker keypad and you can always write accurately and without deformation of the characters. The cartridges are independent and directly in contact with the print head. The marker is equipped with an automatic nozzle cleaning system so in case of very long machine stops, there is no danger of blocking, but simply replace the exhausted cartridges without further maintenance. The message to be printed can be set by PC in any Word font format. To use it, simply save it on the SD card included in the machine.

Typically, the ASCO CO2 Gas Dosing System is used together with water desalination plants. The system is equipped with a CO2 pressure reducing valve, filtration unit, CO2 gas flowmeter, CO2 regulating valve, pressure gauges, safety valves and a completely prewired control cabinet. In case of maintenance the system provides a manual bypass line, which also can be monitored by the flowmeter. Herefore, changing a filter cartridge or doing any other service work on the system is quick and easy! As raw and fitting material ASCO uses mainly stainless steel. This makes the system very resistant and extends the products life cycle. easy to install very accurate 4 20 mA output signal robust stainless steel construction no auxiliary equipment like air compressor needed, only power supply is required

Angular expansion joints absorb movements perpendicular to the bracing lane. The reaction forces caused by the internal pressure are absorbed by the hinge frame. In pipelines of larger nominal size and high pressure only tensioned angular expansion joints in the form of hinge-systems are able to absorb the expansion. Thus, for pipelines expansion joints are only installed as hinge-systems (combination of either 2 or 3 expansion joints). Those are L-, U- or Z-shaped. This requires additionally a 90 ° redirection of the pipeline. Thereby, stress due to inner pressure will be absorbed by the hinge tensioning. In case those systems cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed.. Types of design for angular expansion joints: Single hinge angular expansion joint for movements in one plane gimbal hinge angular expansion joint for omnidirectional movement

Lateral expansion joints absorb movements vertical to the bracing plane. The reaction forces caused by the internal pressure are absorbed by the joint mounting. Under internal pressure expansion joints generated pressure reaction forces. For a better understanding, the following considerations with different diamaters, pressures and resulting from it the forces: DN 150 -> 25 bar ~ 80 kN = 8 t DN 300 -> 10 bar ~ 100 kN = 10 t DN 1000 -> 1.5 bar ~ 130 kN = 13 t Due to high forces, movements in pipelines of higher nominal size and higher pressure can only be absorbed with braced expansion joints. Applying braced expansion joints pressure stress can be absorbed, while fixed bearings can be dimensioned smaller. In case a 3-hinge-system cannot be applied due to missing space, special-purpose solutions like pressure-balanced expansion joints can be installed. Types of design for lateral expansion joints: ball bearing types with tie rods for all-side movements cross hinged types for...

Remove Heavy Metals and Organic Compounds from Wastewater to Comply with POTW Discharge Regulations PRAB works with many customers who produce wastewater that is either too acidic or too alkaline to be discharged into the public sewer. In these cases, a reliable pH adjustment system like the fully automated, skid-mounted systems offered by PRAB, could be the solution. The pre-packaged pH Adjustment Systems treat a wide variety of industrial waste streams and are configured to neutralize and automatically adjust the pH of wastewater, greatly reducing labor costs, eliminating accidents and potential illegal discharge violations. PRAB starts with a review of the application and then focus on which pH adjustment system will be best suited for the process. Customizable options are offered, which makes the selection process less challenging. PRAB has streamlined this process with its new water/wastewater analysis instrumentation and complimentary lab with pH testing equipment

The BASIC 56 system, which has a frame depth of 56 mm, is a high-performance, economical alternative for doors and windows in projects with its 20 mm glass fiber reinforced polyamide barrier and 3-chamber structure. The system is suitable for all openings required for windows and doors, such as inward or outward opening, double opening, and transom window. The system, which can be used with all opening mechanisms with Eurogrove channels, can also be used with PVC-axis opening mechanisms. The system, which has profiles with wall thicknesses between 1.6 mm and 2.0 mm, allows the use of glass up to 36 mm wide. In the system with a case depth of 56 mm, the wing depth is 65 mm.

The ICON 84_HI system, which has a frame depth of 84 mm, is a high-performance system for doors and windows in projects with its 48 mm glass fiber reinforced polyamide barrier and 3-chamber structure. The system, which is suitable for all openings such as inward-outward opening, double opening, and transom window, can also be used with PVC-axis opening mechanisms for windows and doors. The system allows the use of glass up to 60 mm wide with profiles with wall thickness between 1.6 mm and 2.0 mm. In the system with a case depth of 84 mm, the wing depth is 93 mm.

It is a high-performance series that provides the desired openings in projects with its normal sliding and Lift&Slide mechanism options. High strength and performance are offered with 24 mm glass fiber reinforced polyamide barriers. Different types from 1 moving wing to 6 wings can be easily produced with frame profile alternatives such as monorail, 2-rail and 3-rail. With the application of steel rails and bearings, wings weighing up to 200 kg can be carried with the system. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows locking from multiple points. The system allows the use of glass up to 30 mm with profiles with wall thickness between 1.6 mm and 2.0 mm. In the system with a case depth of 100 mm, the wing depth is 38 mm.

It is a system with rich connection details for wall and floor connections, allowing large openings to be easily passed in regions with hot climates. It includes different options with slatted or U-ribbed slatless versions. The striped texture on the case profile and the skirt profiles of the wings can be offered to the user as different options. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows multi-point locking. The system allows the use of glass between 4 mm and 24 mm with profiles with wall thickness between 1.6 mm and 2.00 mm. In the system with a case depth of 91 mm, the wing depth is 36 mm

It is a high-performance series that provides the desired openings in projects with its normal sliding and Lift&Slide mechanism options. High strength and performance are offered with 35 mm glass fiber reinforced polyamide barriers. Different types from 1 moving wing to 6 wings can be easily produced with frame profile alternatives such as monorail, 2-rail and 3-rail. With the application of steel rails and bearings, wings weighing up to 400 kg can be carried with the system. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows multi-point locking. The system allows the use of glass up to 55 mm with profiles with wall thickness between 2.0 mm and 6.6 mm. In the system with a case depth of 160 mm, the wing depth is 60 mm.

It is a system with minimum profile dimensions that allows use in regions with different climates with its 20 mm glass fiber reinforced polyamide barriers. It includes different options with slatted or U-ribbed slatless versions. The striped texture on the case profile and the skirt profiles of the wings can be offered to the user as different options. With its EPDM wick structure, air and water impermeability, wind load resistance and thermal performance values ​​are provided at the highest level. With its Eurogrove channel structure, it is compatible with different brands and types of opening accessories. It allows multi-point locking. The system allows the use of glass between 4 mm and 24 mm with profiles with wall thickness between 1.6 mm and 2.00 mm. In the system with a case depth of 91 mm, the wing depth is 36 mm.

The ICON 70 D door system, which has a frame depth of 70 mm, allows all door types that open inward and outward with the desired face appearance for projects. 18 mm glass fiber reinforced polyamide barrier and 3-chamber structure provide high thermal and performance values ​​to the system. Thanks to its Eurogrove channel structure, it can be used with all opening mechanisms. Emergency exit doors with panic bars offer an ideal solution for building entrance and exit doors with multi-point locking. The system allows the use of glass up to 36 mm wide with profiles with wall thickness between 1.6 mm and 2.0 mm. The system has a case depth of 70 mm, and the same width is maintained in both the face structure and the wing.

ICON 70 BV allows the production of wings with a transparent appearance from the outside, with glass bonded to the wing. With its 34 mm glass fiber reinforced polyamide barrier and 3-chamber structure, it is an ideal high-performance alternative for hidden sash windows in projects. Offering an innovative solution for inward opening doors, the Eurogrove channel system can be used with all opening mechanisms. The system allows the use of glass up to 32 mm wide with profiles with wall thickness between 1.6 mm and 2.0 mm. In the system with a case depth of 65 mm, the wing depth is 74 mm.

With the system having a high carrying capacity, many folding wings of 3 meters or more are made to enable large spans to be crossed easily. The carrier bearings of the system, designed in accordance with European standards, are located in the upper part. The system, which allows opening in and out, achieves high performance with its 24 mm wide glass fiber reinforced polyamide profiles, EPDM wicks and special accessories. Folding joinery with 3, 4 and 6 wings can be made with the system, which allows making wings of 1 meter wide and over 3 meters. Gathering all the wings on one side saves space. The system allows the use of glass up to 44 mm with profiles with wall thickness between 1.8 mm and 2.0 mm. In the system with a case depth of 144 mm, the wing depth is 51 mm.

BASIC 60 system, which has a frame depth of 60 mm, is an ideal high-performance alternative for doors and windows in projects with its 24 mm glass fiber reinforced polyamide barrier and 3-chamber structure. The system is suitable for all openings required for windows and doors, such as inward or outward opening, double opening, and transom window. The system, which can be used with all opening mechanisms with Eurogrove channels, can also be used with PVC-axis opening mechanisms. The system allows the use of glass up to 48 mm wide with profiles with wall thickness between 1.6 mm and 2.0 mm. In the system with a case depth of 60 mm, the wing depth is 69 mm.

The SLIM 82 T system, which has a frame depth of 82 mm, is one of the thinnest systems designed for doors and windows with large openings, where the visible width of the frame and sash is kept to a minimum. In addition to its narrow frame and wing combination feature, it offers ideal solutions for renovation projects and new buildings with its steel-looking lines. The system, which can be used with all opening mechanisms with Eurogrove channels, is suitable for all openings required for windows and doors, such as inward or outward opening, double opening, and transom window. The system allows the use of glass up to 67 mm wide with profiles with wall thicknesses between 2.0 mm and 6.6 mm. In the system with a case depth of 82 mm, the wing depth is 92 mm.