Wire cutting - Import export

WIWOX® SD rounded cut wire shot is mainly used for cleanblasting and shot peening. Depending on the quality of the raw material used, different hardness classes are obtained. We supply non-corrosive cut wire shot that meet the requirement of particularly high demands. Cylindrical cut wire shot blasting abrasives are cut from wire. The length of the grain is equal to the diameter. Grain shapes of different roundness are produced through the subsequent rounding of the cylindrical raw material, rounded from G1 – G3. Cut wire shot has a particularly long service life and are known for low dust generation.

Special types are type stamps, which run through a special production, as the complexity of some shapes demands special production. Wire-cut or 5-axle special types for segments or segment stamping can be produced in every form. The selection of the materials is guided by the use.

Roller die Roller die for the roller process of round work pieces with or without starting slope. These dies can be given flexible texts from individual insert milling or wire-cut excavations. The selection of materials depends on the relevant use. During production, we are guided by your drawings or data.

Tool making & construction: The key to success We know the different industry-specific requirements for stamped parts and parts suppliers. Therefore, our day-to-day work includes very demanding tasks, which we overcome speedily and process reliably. Our spectrum of services for tool construction includes: 3D-CAD/CAM construction and programming (solid works, Peps, HSMworks) Wire-cut EDM (also contract manufacture) with workpiece sizes up to max. 600x400x350 mm Drilling erosion (start hole shooting) with workpiece sizes up to max. 250x350x300 mm Milling technology with workpiece sizes up to max. 650x500x500 mm Turning technology with workpiece sizes up to max. dm 210 x 1000 mm Flat grinding with workpiece sizes up to max. 600x300x375 mm and more…. Even complicated customer requirements are never a problem for us, but are instead a welcome challenge.

Trimmed for peak performance The construction industry is booming – and this has been the case for decades and all across the world. The need for new buildings, bridges and general infrastructure is constantly increasing. In terms of modern urban development, the demolition of buildings that are no longer up to date is part of everyday life. The stress on the tools used for this is easy to imagine. Demolition shears are used, for example, to cut angle iron or wire mesh, or to cut concrete ribs and steel rods. Our shearing knives or shear blades for mobile demolition shears are designed exactly for these massive stresses and have been used for many years on construction sites all over the world.

11SMn30 - 1.0715 11SMnPb30 - 1.0718 11SMn37 - 1.0736 11SMnPB37 - 1.0737

Filter belts are used for a continuous filtration of polymer melt. These filter belts, but also wire mesh pre-cut parts, are manufactured in various dimensions and weaves. For high demands the fabrics are available with high tenacity warp wires. Plasma cut edges assure a continuous and frictionless passage of the filter belts Materials:Stainless steel, plain steel, combinations of various materials.

Non-Grain Oriented Electrical Steel (NKO) is a specially manufactured steel to achieve certain magnetic properties. It ensures low power loss, core loss and high permeability. NGO is the first choice for manufacturing lamination stacks for stator and rotor of electric motors. The sheets are laminated and cut into the final shape through various processes before winding. Punching, laser cutting and wire EDM are some of the processes used to achieve the final shape.

• For cutting hard and soft wires • With cable stripper function for all common cables ranging from Ø 8 mm to Ø 13 mm • For accurate, fast and safe stripping of all common round cables • Cutting edges inductively hardened • Precision cutting edge for the finest wires • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting hard and soft wires • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting hard and soft wires • For holding, gripping, bending and cutting work • Cutting edges inductively hardened • With cutting edge and burner hole • With long, 45°-angled, flat-round jaws • Serrated inside jaws • Integrated ring spanner • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• For cutting wire ropes and steel wire without any burr or splaying • For wire ropes 1570 N/mm² • Cutting edges inductively hardened • With optimum leverage for easy and effortless work • Handles made of precision steel tube • Insulation according to DIN EN/IEC 60900

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional power side cutters • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• Specifically geared towards the requirements in the building and manufacturing industry • Cutting edges inductively hardened • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Asymmetrical cutting edge for easily cutting long workpieces, too • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional end cutting pliers • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

For stripping solid, stranded or finely stranded conductors with standard insulation With V-shaped cutting edge for wires and strands up to a max. of 5 mm or 10 mm conductor cross section With adjustable screw for easy adjustment to the required wire or strand diameter With opening spring Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 Made of tool steel, forged, oil-hardened

• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened

• cuts boiled potatoes or mozzarella easily into evenly thick slices • tip: the professional user holds the tool in a slightly slanted angle and presses the boiled potato with the flat hand through the cutting wires