Threaded screws - Import export

The economic adjustment to small batch sizes, we meet with our turned parts for the direct assembly in plastics and die-cast products. Any thread forms such as, thread-tapping (DIN7500), thread cutting (DIN 7513-7516) or KTG for direct screw in plastics are realized cost-effectively. Advantage is the elimination of high tooling costs, since no counter-thread in the workpiece (eg threaded inserts, nuts, etc.) is required because the direct assembly takes place directly into the workpiece. Only a given tube is required in order to screw it directly. Our turned parts replace previously cold formed parts used (so-called multi-station presses) which require high output volumes in order to achieve a reasonable price parts.

PT screws for thermoplastics: Thread rolling screws for direct screwing into plastics, Thread 30° or 60° KTG screws for thermoplastics: Single-start or double-start thread (high, low) Thread rolling screws are extruded for larger batch sizes and turned for small batch sizes (Turned parts for direct screwing) High tensile and highly stressable connection of thermoplastics with considerably longer life endurance Thread rolling without chips and loss of material Minimum radial tension, large thread coverage Process-reliable due to torsion strength Shorter and slimmer screws are possible. Materials: Steel, case-hardened Quenched and tempered steel 1.5523 tempered to 1000 +200 N/mm², high-grade steel 1.4567, other materials on request Length: 3 – 160 mm (at lengths from 60 mm only partial thread lengths 4 x d are possible) Thread diameter: 1.6 – 10 mm Special dimensions on request Batch sizes: Standard ex-stores Special screws from 30,000 pieces

Large Quantities: produced as cold formed parts (so-called multi-station presses), which require high output volumes in order to achieve a reasonable price parts Small Quantities: Produced as turned parts - the economic adjustment to small batch sizes Fields of application: For thermoplastics, duroplastics, light alloys, metal compounds. Industrial consumers: Electrical industry, plastics processing industry, sheet metal processing industry, telecommunications, tank- and container construction.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

Novelis’ fracture-proof, seamless aluminum bottles offer needed protection when transporting and storing sensitive and critical goods. Novelis produces aluminum bottles for a range of applications — from commercial use to United Nations-approved packaging — in several coating configurations and sizes with fill capacities ranging from 38 ml to 6250 ml. These bottles include rolled thread for screw stoppers, tamper-proof seal and screw closure, plastic screw closure and locking ring, plastic threaded ring for pilfer-proof closure and flex-spout closure system.

Unions in numerous variants Numerous special designs Due to our excellent national and international supplier relationships, we are able to deliver standard fittings as well as numerous special designs. It is possible, for example, to deliver A 105 screw connections with a bronze-steel seat. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI B 16.11 BSP thread according to ANSI B 16.11 G thread according to DIN ISO 228 R thread according to DIN 2999 like BSP. Internal / external thread and SW ends All threads are available as internal / external threads (male / female). Furthermore, the screw connections can also be supplied with SW ends (socked weld). The combination of the different ends is also possible. Screw connections according to ANSI B 16.11 are always 3-part and have a metallic-conical seal.

Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping

Thread fittings according to ANSI B 16.11 Straight from our warehouse We always have numerous versions of threaded fittings (ANSI B 16.11) available in our extensive warehouse in Kamen. We can also supply you at short notice. We only deliver goods of European origin. Different thread types Screw connections can be supplied with the following threads: NPT thread according to ANSI 1.20.1 BSP thread according to EN 10226 G thread according to DIN ISO 228 such as BSP / P R thread according to DIN 2999 like BSP / T. Standards and special requests We supply threaded fittings as standard in two pressure levels (3000 lbs and 6000 lbs) and in all common materials. We can also supply 9000 lbs and special materials if required.

Hexagon head screws with thread to head acc. to DIN 933-8.8 (ISO 4017) galvanized surface

PROCESS DATA MEASUREMENT AND PROCESS CONTROL ON HIGHEST LEVEL AND NEARLY MAINTENANCE-FREEFollowing the user‘s request for easy maintenance and low susceptibility to slightly soiled water, the proflow mechanical - as a replacement for the current and widely used standard measuring variant with impeller or turbine - now makes mechanical measurement according to the differential pressure principle (without rotating parts) available. The sensors can be visualized via a protemp controller or connected to a PLC. A completely non-contact flow measurement based on the ultrasonic principle is available with the proflow ultrasonic. Robust flow measurement in consumer return line PT 1.000 temperature measurement in consumer return line 6 x 2 consumer channels 3/4“ female screw thread 1 x 2 main connection 1“ female screw thread Available in three temperature variants: operating temperature up to 100°C, up to 160°C and up to 180°C Max. flow rate each channel:: 25 l/min or 50 l/min

3-hole 90° Screw-in BSPP Threaded Flange WP-3-LK-G ▪ Working Pressure: 300 bar ▪ Ø LK: 26 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: ZnNi 4-hole 90° Screw-in BSPP Threaded Flange WP-LK-G ▪ Working Pressure: 250 bar ... 300 bar ▪ Ø LK:35 mm ... 55 mm ▪ Materials: S355J0or equivalent ▪ Surfaces: ZnNi 3-hole 90° Screw-in BSPP Threaded Flange(Aluminium) WP-3-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK: 26 mm ... 51-56 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)] 4-hole 90° Screw-in BSPP Threaded Flange (Aluminium) WP-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK : 30 mm ... 55 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)]

▪ Screw-in version, measures current temperatures directly in the pipeline ▪ Rod-type version (-TSH), especially designed to determine the media temperatures in tanks and containers ▪ 5-pin connection ▪ Input signal: 0 ...3 V DC ▪ Output signal: 7 ...12 V DC ▪ CAN version ▪ Indication of the sensor status via LED ▪ 5-pin SPEEDCON connection plug ▪ CANopen protocol profile DS301, Typ 2.0A with manufacturer-specific additions ▪ LSS service DS305 v2.0 ▪ Output signal: CAN bus ▪ Measurement medium: liquids (consult STAUFF for use with aggressive media ▪ Calibration certificate on request Materials ▪ Housing (T): Stainless Steel ▪ Gaskets (T): FPM (Viton®) ▪ Rod (TSH): Stainless Steel 1.4304 ▪ Handle (TSH): Delrin Weight ▪ T (M10x1): 70 g / .15 lbs ▪ T (G1/4): 55 g / .12 lbs ▪ TSH: 120 g / .26 lbs Connection: ▪ a) STAUFF Test connection SGV-16S-G-C6F in the pipeline (only M10x1) ▪ b) Screw-in thread (T): M10 x 1 or G1/4 ▪ c) Screw-in thread (TSH): M10 Ambient Conditions (Screw-in...

This stainless steel anchor (M12 thread), which is screwed through a steel structure and countered on the other side, is equipped with an unobtrusive anchorage eyelet. It is designed to protect 1 individual from falling and is suitable for all directions of load (incl. axial). Our standard package also includes 1 counter nut. EN 795:2012, A Small and unobtrusive Designed for steel structures (countered) Installation materials included