Systems engineering - Import export

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

Adaptive Docking System for Engine TestingSelf-Centering – Minimised Rigging Times Advantages Salient features and advantages of the adaptive TOK DOCKING SYSTEM: ➜ There is no longer need for complex mechanics and manual intervention on the dynamometer side. A correctly positioned, solid support is sufficient ➜ Rigging with time-consuming assembly procedures takes place outside the test cell ➜ Rotational speeds of up to 6 000 -rpm are possible ➜ All the toothed shaft components of a system engage in any turning position while maintaining good balance ➜ Centering attachments are available as spare parts and easily changeable ➜ The docking system can be extended to multiple test cells

Adjustment of workstation systems through to complex mechanical engineering systems Lifting columns are the ideal drive elements when a motor setting is required in addition to the stable guidance. The whole technology is integrated and not visible from the outside. These lifting columns do not need any additional coverings. Usually, no special electrical knowledge will be required for the commissioning. Various versions are available as standard for the application in the field of medical technology. Several lifting columns can be combined and synchronised and offer further impressive application possibilities. The MultiControl-units can be linked by a BUS-system and enable the synchronization of maximal 32 lifting columns. The right Lifting column, quickly and easily Use our online product finder and compare lifting columns with each other, receive catalogue and CAD data or request the desired products directly.

Merecs develops individual test systems for heat pumps, gas, fluid and water systems. Our engineers & fitters for electronics, installation technology and mechanics build the systems completely from one source at our location in Steinfurt. The systems are then delivered and commissioned at home and abroad. Our range of products includes - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design

Universal use for a wide range of applications Ice stores are used in more and more areas of technology. In addition to the classic areas of application in refrigeration, air conditioning and commercial kitchen technology, ice storage systems and cold water systems are increasingly being used in process engineering systems. Cold water for subsequent production processes is generated with ice storage tanks. Ice storage systems thus provide stored cold. Use of cheap night electricity tariffs With the help of ice storage technology, cheap nighttime electricity tariffs can be used. During the night, ice is continuously built up on the plates or on the pipe coils. This ice is then available during the day as stored cooling capacity. This can significantly reduce energy costs. The cooling units can also be made smaller when using ice storage systems.

FRICKE dosing systems make it possible to integrate rush orders into the ongoing production process without interruption, allowing schedules and workflows to be adhered to. Thanks to extensive accumulation sections for mixing containers and multi-pot mixtures, unattended night-time operation is also possible. The batch management software ensures that all orders are processed safely and efficiently. ■ 40 fully automatic mixing recipes during the unattended night shift ■ 2000 dosing cycles per day ■ for liquid dosing up to 120 kg batch size ■ 150 kg scale, 0.1 g indicated scale resolution ■ dosing accuracy +/- 0.5 g ■ DN 8/15 valve ■ high dosing speed through parallel dosing on several scales ■ barcode assisted dosing ■ individual container transport systems ■ integrated, environmentally sound ■ extraction system directly at the dosing point ■ optional: Pipe system engineering and execution ■ Ex protection according to Atex

FRICKE dosing systems make it possible to integrate rush orders into the ongoing production process without interruption, allowing schedules and workflows to be adhered to. Thanks to extensive accumulation sections for mixing containers and multi-pot mixtures, unattended night-time operation is also possible. The batch management software ensures that all orders are processed safely and efficiently. ■ 40 fully automatic mixing recipes during the unattended night shift ■ 2000 dosing cycles per day ■ for liquid dosing up to 120 kg batch size ■ 150 kg scale, 0.1 g indicated scale resolution ■ dosing accuracy +/- 0.5 g ■ DN 8/15 valve ■ high dosing speed through parallel dosing on several scales ■ barcode assisted dosing ■ individual container transport systems ■ integrated, environmentally sound ■ extraction system directly at the dosing point ■ optional: Pipe system engineering and execution ■ Ex protection according to Atex

Dosing systems for production mixtures up to 1500 kg batch size Our machines offer a wide range of options for process optimisation. Equipped with valves of different sizes, they ensure maximum speed and accuracy. The use of several scales in one system significantly increases productivity, creates free capacity and enables on-time production with a 50% increase in output. ■ up to 16 fully automatic mixing recipes during the unattended night shift ■ scale sizes: 300/600 kgs; 1 g / 2 g indicated scale resolution ■ dosing accuracy: +/- 5 g / +/- 6 g ■ parallel dosing on several scales ■ valve sizes from DN 15 to DN 50 ■ fast adaptation to dosing containers between 75 litres and 600 litres ■ barcode assisted dosing ■ individual container transport systems ■ integrated, environmentally sound extraction system directly at the dosing point ■ Pipe system engineering and execution ■ Ex protection according to Atex

BPLS Bypass Filters are used as an additional micro filter connected in bypass to the conventional main stream filters on engines (and automatic transmissions.) Filter ElementS ▪ Filter elements of SRM series Construction ▪ Bypass Lube-Oil Filters (for engines and transmission systems) Maximum Sump Size ▪ 35 l / 9.25 gal Housing Volume ▪ 2,2 l / 0.58 gal Port Connections ▪ G1/4 Materials ▪ Aluminium

System for the impregnation of electomagnetic coils, e.g. of electric motors, transformers, generators Impregnating in electricla engineering means applying an impregnating agent in gaseous or fluid form to a porous body in order to insulate it electrically, i.e. that reliable protection against electrical breakdown is provided even when the thickness of the insulating layer is small. For each application HÜBERS provides appropriate process. HÜBERS offers all relevant process variants including vacuum impregnation, vacuum-pressure impregnation and atmospheric impregnation and of these coupled with the use of the many different impregnating agents such as varnish, resin, oil, wax, gas etc. The processes of evacuating the parts prior to impregnation and if necessary of vacuum-drying the impregnated parts are matched to the properties of the parts and ensure that the agent wets the walls of the pores properly and fills the cavities completely.

Plant construction requires compensation of thermal and mechanical expansion. Our solutions are just as varied as the wide range of applications. Why not make use of our long years of experience? We provide assistance in both word and deed, calculate the technical design and give you individual advice – also on site. Applications: Power stations, major plants, blast furnaces, domestic installations, shipbuilding, chemical and food production plants, paper industry, engine systems, ventilation construction, sewage systems, material moving systems, silencing applications Nominal widths: DN 20 to DN 5000 Structural lengths: Varying standard structural lengths or custom production Connection types: - Flanges: RSt 37-2 blue chromated or stainless steel – other materials on request - Clamp fastening

We manufacture columns for the process engineering systems of our customers in steel, stainless steel and aluminum. Regardless of whether it is a tray, packing or other column with our knowhow, we manufacture columns exactly according to your requirements.

Our combined turned-milled parts which are produced fully automatic on CNC machining centers are used in general mechanical engineering and actuator systems.