Series part - Import export

tried and trusted a thousand times in practice the low price permits the economic use in individual shift operation and with rarely used tools can be directly mounted to each tool, no setup costs

Instead of mounting one or more Transporters to each die, the PSKS features one unit only – mounted directly to the face of the bolster. A heightadjustable mounting bracket allows flexible usage with multiple tools and dies. The only extra thing needed will be scrap trays in different sizes On the left and right end of the system, heightadjustable brackets with linear bearings support a crossmounted aluminum profile. The profile is fastened with standardized clamping brackets and will transfer the motion over the whole width Numerous trays can be mounted. Two rugged nylon Ushape clamps are permanently fastened to each of the trays. The fasteners are designed to slide and fit snug onto the aluminum profile so that exchanging of trays is just a matter of seconds. The length and width of the tray is determined by the size of the die slot.

The INFICON Gemini Inverted Magnetron Vacuum Gauge is the workhorse for all vacuum measurement applications (pending). Gemini combines two sensor systems into one small device to measure from atmosphere to 1x10 – 9 mbar. The patented ultra-low magnetic stray field design opens up a whole new range of applications. A unique interchangeable dual chamber sensor unit avoids cleaning cycles and reduces maintenance, making Gemini the most robust and economical vacuum gauge of its kind. Gemini Cold Cathode and combination comes with fully integrated digital electronics, providing ultimate flexibility for system integration. Cold cathode and Pirani combination option provides seamless transition, reliability, practicality and flexibility across wide ranging applications. MPG500 series represents the latest Technology to act as direct replacement for Cold Cathode or Penning Transmitters of the PTR 90 / PTR 225 (analog Versions) series. Part-No Typ Part-No Typ 3MB0-006-000P MPG500 SS,...

We offer customized die-cast parts, stamped parts, deep-drawn parts, turned parts, milled parts and contact springs, both as small-precision and large parts. Partial or complete plastic and rubber injection molding of metal parts is also part of our portfolio. The manufactured metal parts can be completed with sealing elements, threaded inserts and bearing bushes. We also offer processes for cold pressing, as well as cost-effective surface finishing. We accompany our customers throughout the entire project process and organize the tool and sample production as well as the production (including surface finishing) and optionally also the assembly of the series parts.

The INFICON Inverted Magnetron Pirani Gauges, MPG400 and MPG401, measure from 5 x 10 -9 mbar toatmosphere (3.8 x 10 -9 Torr to atmosphere). Combining technologies into one single compact unit withone logarithmic analog out put signal significantly reduces the complexity of installation, setup an dintegration. This Cold Cathode inverted magnetron Gauge MAG400 series is direct replacement of the PTR 90 Transmitter series: Part-No Typ Part-No Typ 351-010 MPG400 DN25 ISO-KF = 230 070 PTR 90 DN25 KF 351-011 MPG400 DN40 ISO-KF = 230 071 PTR 90 DN40 KF 351-012 MPG400 DN40 CF-F = 230 072 PTR 90 DN40 CF 351-999 MPG400 Maintenance set = none 351-998 MPG400 Repair set = none 351-995 MPG400 Spare-ignition aid (10 pcs) = none 351-994 MPG400 Ignition tool set = none 351-023 MPG400 Magnetic shield = 230 073 V01 PTR 90 Magnetic shield Within our own INFICON channel we also offer the type MPG401, which is a metal sealed version of the MPG40x line. For further information please check out the...

The INFICON Penning Gauge PEG100 provides reliable high vacuum measurements. The rugged penning cold cathode sensor has no filament to burn out. Due to titanium cathode plates and the reduced high voltage after plasma ignition, the gauge can be operated also in sputtering applications. The fieldbus options, in addition to the logarithmic analog output signal, allow easy integration into vacuum systems using Profibus DP or DeviceNet protocols. This Penning Gauge PEG100 series is direct replacement for Penning Transmitters of the PTR 225 / PTR 225 S / PTR 237 / PTR 225 PB / PTR 237 D series: Part-No Typ Part-No Typ 351-000 PEG100 DN 25 ISO-KF = 157 34 PTR 225 DN 25 KF 351-001 PEG100-S DN 25 ISO-KF, SP = 164 34 PTR225 S DN 25 KF, SP 351-002 PEG100 DN 40 CF-R = 157 36 PTR 237 DN 40 CF-R 351-005 PEG100-P DN 25 ISO-KF, PB = 896 41 PTR 225 PB DN 25 KF, PB 351-004 PEG100-D DN 40 CF-R, DevNet = 896 42 PTR 237 D DN 40 CF-R, DevNet 351-490 PEG100 Spare cathode plates (5 pcs) = 16291 PTR...

The INFICON Pirani Capacitance Diaphragm Gauge (PCG55x) combines the INFICON Pirani technology with the advantages of a ceramic capacitance diaphragm sensor in a single product. In the measurement range between 10 mbar and atmosphere the capacitance diaphragm technology provides gas-type independent, highly accurate values for reliable pressure measurement. The PCG55x offers also a variety of features which allows the right product configuration for the demanded application. This Pirani Capacitance Diaphragm Gauge series PCG550, PCG552, PCG554 direct replacement for TTR 101 series: Part-No Typ Part-No Typ 3PC1-001-0000 PCG550 FCC,16KF = 230350 V01 TTR 101 TTR 101, FCC, 16 KF 3PC1-00F-0000 PCG550 FCC,1/8NPT = 230351 V01 TTR 101 FCC, 1/8 NPT 3PC1-001-2000 PCG550 FCC,2SP,16KF = 230352 V01 TTR 101 FCC, 16 KF, 2SP 3PC1-00F-2000 PCG550 FCC,2SP,1/8NPT = 230353 V01 TTR 101 FCC, 1/8 NPT, 2SP 3PC1-001-1000 PCG550 FCC,LCD,16KF = 230354 V01 TTR 101 FCC, 16 KF, LCD 3PC1-00E-1000 PCG550...

The INFICON Pirani Standard Gauge (PSG55x) employs like his brothers PCG55x and PSG50x the most advanced digital Pirani technology available. The rugged sensor design combined with the compact size and the variety of features qualifies it as the right product for measurement from low to the high vacuum range. The Pirani Gauge series PSG550 / PSG552 / PSG554 are direct replacements for the TTR 911 / TTR 916 series: Part-No Typ Part-No Typ 3PI1-001-2020 PSG550 FCC,2SP,PBus,16KF = 89650V01 TTR 911 PB, DN16 KF 3PI1-001-2010 PSG550 FCC,2SP,DNet,16KF = 89651V01 TTR 911 D, DN16 KF 3PI2-001-2020 PSG552 FCC,2SP,PBus,16KF = 89652V01 TTR 916 PB, DN16 KF 3PI1-001-1000 PSG550 FCC,LCD,16KF = 89654V01 TTR 911 LCD, DN16 KF 3PI2-001-1000 PSG552 FCC,LCD,16KF = 89656V01 TTR 916 LCD, DN16 KF 3PI2-001-1000 PSG552 FCC,LCD,16KF = 89656V01 TTR 916 LCD, DN16 KF 3PI3-001-0000 PSG554 FCC,16KF = 89658V01 TTR 911 CC, DN16 KF 3PI3-001-2020 PSG554 FCC,2SP,PBus,16KF = 89659V01 TTR 911 CC PB, DN16 KF 355-925...

The INFICON Pirani Standard Gauges, PSG500 and PSG502-S, PSG510-S and PSG512-S employ the most advanced digital Pirani technology available in the marketplace. The rugged stainless steel sensor cell and compact design qualifies them for use on semiconductor systems and for standard applications, such as fore vacuum lines. The PSG500 / PSG502-S Pirani Gauge series are direct replacements for TTR 91 S / TTR96 S series: Part-No Typ Part-No Typ 350-060 PSG500 DN 16 ISO-KF = 230 035 TTR 91 DN 16 ISO-KF 350-061 PSG500 1/8" NPT = 230 038 TTR 91 1/8" NPT 350-062 PSG500 DN 16 CF-R = 230 036 TTR 91 DN 16 CF-R 350-068 PSG500 DN 16 CF-R, long = 230 037 TTR 91 DN 16 CF-R, long 350-080 PSG500-S DN 16 ISO-KF = 230 040 TTR 91 S DN 16 ISO-KF 350-081 PSG500-S 1/8" NPT = 230 043 TTR 91 S 1/8" NPT 350-088 PSG500-S DN 16 CF-R, long = 230 042 TTR 91 S DN 16 CF-R, long 350-140 PSG502-S DN 16 ISO-KF = 230 045 TTR 96 S DN 16 ISO-KF 350-148 PSG502-S DN 16 CF-R, long = 230 047 TTR 96 S DN 16 CF-R,...

The INFICON Bayard-Alpert Pirani Combination Gauge, BPG400, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG400 for affordable and repeatable process to base pressure measurements in one economic package. This Bayard Hot Ion Pirani combination Gauge BPG400 series direct replacement for the ITR 90 series: Part-No Typ Part-No Typ 353-500 BPG400 DN 25 ISO-KF = 120 90 ITR 90 DN 25 ISO-KF 353-502 BPG400 DN 40 CF-R = 120 92 ITR 90 DN 40 CF-R 353-505 BPG400-SP ProfiBus, DN 25 KF = 230 030 ITR 90 DN 25 ISO-KF 353-506 BPG400-SP ProfiBus, DN 40 CF-R 230 031 ITR 90 DN 40 CF-R 353-501 BPG400 LCD, DN 25 ISO-KF = 120 91 ITR 90 DN 25 ISO-KF Displ. 353-503 BPG400 LCD, DN 40 CF-R = 120 94 ITR 90 DN 40 CF-R Displ. 354-490 BPG400 Spare-Sensor DN 25 ISO-KF = E 121 02 ITR 90 Spare-Sensor IE90 DN 25 KF 354-491 BPG400...

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

The CANopen Bootloader protocol stack provides the complete functionality for integration of a bootloader according to the CANopen standard in your existing devices. Versatile configuration options facilitate individual customization to a target product. The Bootloader was implemented to meet low storage requirements. The CANopen Bootloader stack comprises a reduced object dictionary and supports NMT, SDO (Expedited/Segmented/Block), Emergency, Heartbeat as well as LSS services. Up to four separate sections for storage of programmes and data may be defined. The CANopen Download Tool is used to update programmes and data of the target hardware. A defined API facilitates adjustment to a flash memory of the target hardware. Flash drivers for various controllers (e.g. STM32 series) are part of the CANpie driver.

In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...

STAUFF NRC type clamps were designed for the noise and vibration reducing installation of pipes and tubes with the most common outside diameters between 6 and 42 mm and ¼ to 1 ½ inch respectively. The working principle is based on clamp bodies made from Polypropylene (colour: black) following the Standard Series according to DIN 3015 (part 1) with a specially shaped, two-part elastomer insert, which mechanically absorbs vibrations in the pipe and as a result reduces noises arising to a minimum. The insert is in particular distinguished by how little of its surface is in contact with the pipe and clamp body, and as a result is far more effective than the previously known solutions. The tongue-groove contour of the insert and body, which is reversed and thus diverges from DIN 3015, enables the system to be used for the widest possible range of pipe diameters per clamp size, which contributes to flexibility and versatility. STAUFF NRC Clamps are completely compatible with the...

Industrial parts cleaning with the Perkute Toploader Series The PERKUTE rotating basket cleaning machine from the Toploader series is used wherever effective and inexpensive cleaning of parts of any kind is necessary. The rotating basket, designed for large weights, is powered by means of a low-wear friction wheel drive and the aqueous cleaning in the spray process takes place by means of a nozzle pipe system with special flat-spray nozzles that is arranged on 3 sides. A powerful washing pump supplies the system with the necessary pressure and volume flow. The parts cleaning machines, made completely of non-rusting special steel, istinguish themselves by their compact and robust construction as well as simple handling. They are mobile to deploy and designed to be space-saving. Customisation for individual cleaning tasks can be optimised through a comprehensive range of accessories.

This PERKUTE cleaning system cleans simply and effectively with a very confined cleaning space. The machine is easily loaded by using either a crane or a loading carriage to place the items to be cleaned on the platform. A noticeable feature of the FR cleaning machine is that it offers several simultaneous work process. The PERKUTE-system: economically - environmental – effektive Basic equipment Made of stainless steel Simple operation Space-saving Tank cover, filter basket incl. Low water pressure switch as dry-run protection Suction filter made of stainless steel in front of the pump Adapter for steam extraction Minimum operational costs because of housing insulation in sandwich construction Rotationg blast pipe system incl. fan nozzles Adjustable feed Pneumatic lift gate Programmable electronic control

Industrial parts cleaning with the Perkute Frontloader Series The PERKUTE parts cleaning machines from the Frontloader series are specially conceived for the simple and effective cleaning and de-greasing of both, high-volume components as well as heavy components, as well as those with complex and sensitive geometries. The workpieces are loaded through crane charging or with loading trolleys or loading ramps onto the product slide and then into the washing system. The stainless steel frontloader washing machines with their space-saving, compact design, either work with a driven rotating basket or in the case of sensitive parts, with a nozzle pipe system transported by means of a double-chain, with the products being at rest. All the process stages like washing, rinsing (not in the case of the FR Series) and drying take place in the same treatment chamber. A large number of options for preparing the process media leaves almost nothing to be desired.

We offer PU sheets in the dimensions 3000 x 1000 mm and thicknesses from 1 to 50 mm. Of course, special dimensions are also possible. PU round bars are available in the dimensions 70 °, 80 ° or 90 ° Shore A, dimensions 8 200mm x 1000m. Intermediate sizes can also be requested here. In addition to the extensive range of semi finished products such as plates, round rods, hollow rods and spring elements, molded parts with and without metal are also included in the scope of delivery. Mechanical rework such as water jetting, milling, drilling, sawing, punching and welding offers flexible potential from individual parts to series production. Possible Shore hardnesses from 55 ° 95 ° Shore A.