Results for
Germany
PA66 has excellent tensile strength and rigidity, suitable for applications requiring structural integrity and load carrying capacity.PA66 has good thermal stability and can maintain stable performance in high temperature environment. After glass fiber reinforcement, its thermal deformation temperature can reach more than 250° C.PA66 is resistant to a variety of chemicals, oils and solvents, suitable for harsh industrial environments. Its inherent wear resistance makes it ideal for applications with more friction and wear, such as gears and bearings. PA66 has excellent electrical insulation performance, is an excellent electrical and electronic insulation material.the water absorption of PA66 is large, and the saturated water absorption can reach more than 3%, which will affect the dimensional stability of the parts to a certain extent. PA66 is widely used in automotive, mechanical, electrical and electronic fields, often used in the manufacture of gear, bearings, connectors and other
Request for a quoteGermany
For factory automation we offer compact fieldbus I/O-modules for PROFIBUS-DP, DeviceNet™, CANopen, INTERBUS, AS-interface®, Modbus TCP, Ethernet/IP™ and PROFINET. The IP67-modules for use in harsh environments have glass-fiber reinforced plastic housings and metal-connectors, are fully potted, vibration and shock-proof. The IP20-modules for DIN rails can not only be installed in control cabinets, they can also be used to integrate small, decentralized control boxes with a few I/O-signals to a fieldbus network.
Request for a quoteGermany
1581 latch lock, mortise type, 8 mm hub, metal nickel plated, latch and hub of glass fibre reinforced plastic, 40 mm backset, incl. strike plate 2528
Request for a quoteGermany
ALWA HT RESIN is a resin-based on isocyanate and epoxy (EP), which reacts after adding a catalyst. ALWA HT RESIN offers a range of possibilities for producers of fibre-reinforced materials (e.g., glass fibre, kevlar and carbon), semi-finished and finished goods. The system is also suitable for prepreg and reaction compounds. ALWA HT RESIN is particularly interesting for the aerospace and aircraft industry as well for the rail transport, automotive and electronics industry. The application area of epic resins are electro casting resins, lamination and injection technology (RTM procedure), vacuum infusion, casting and ramming compounds, impregnation resin, casting and injection moulding process as well as prepreg technologies, among others. ALWA HT RESIN is offered in two versions. *ALWA HT RESIN M100 with approx. 50 mPa s *ALWA HT RESIN M2200 with approx. 2200 mPa s The resins can be mixed with one another which enables a flexible adjustment of the viscosity.
Request for a quoteGermany
It is possible to have square as well as round shapes, drilled holes and slots from Ø2 – Ø30 mm, with counter bores and tapped holes. To reduce stress concentration and shearing stress when mounting, we recommend the reinforcement of the clamping areas by fixing glass reinforced laminate (GHGW) plates. GHGW-reinforcement plates can be purchased loose or attached to the leaf spring. A special two-component adhesive is applied for the bonding. Following images indicate possible spring shapes:
Request for a quoteGermany
The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.
Request for a quoteGermany
LUZERN kitchen utensils are designed by Carl Schmidt Sohn and entirely manufactured in Germany. The uniquely designed kitchen utensils are made of high-quality nylon material and are glass fibre-reinforced by high-tech manufacturing which guarantees a high food safety standard. All utensils are heat resistance up 210 degrees Celsius.
Request for a quoteGermany
Bernstein Series CP and CPS polyester enclosures are made of high-grade glass fiber-reinforced polyester. The black polyester enclosures conform to the requirements for Ex applications and are sufficient for accepting and encapsulating electrical and electronic and control components in harsh environments or implicitly explosive atmospheres. All enclosures have achieved protection class IP 66 in accordance with DIN EN 60529. The captive stainless steel cover screws are maintained by a self-latching element integrated into the cover. The threaded bushes are embedded in the flange on the narrow sides of the base and obtain mounting rails, plates and PC boards.
Request for a quoteGermany
The position switches IN73 are the successful answer to an increased demand of the market. The contacts of these new series are specially designed for switching low currents. The IN73 is a hybrid because of the sophisticated fusion of metal and plastic components: All mechanically stressed components are almost completely made of metal. The lower part of the enclosure is made of glass-fibre reinforced plastic, which also makes the IN73 economically attractive. • High reliability at low currents (1 mA / 24 VDC) • Up to 4 contacts • Actuator and installation collar with mounting holes made of metal • Easy turning (8 x 45° ) and changing of the actuators without a tool • Standard switch and standard actuator according to DIN EN 50041 • Protection class IP66 and IP67 according to EN 60529
Request for a quoteGermany
Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Features ▪ Cap diameter of Ø30 mm / Ø1.18 in ▪ Screw-in version, equipped with male BSP thread (ISO 228) Materials ▪ Body and cap made of glass-fibre reinforced Polyamide (PA) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. Technical Data ▪ Operating temperature range: -40 °C ... +120 °C / -40 °F ... +248 °F ▪ Air filter element ƒƒ▪ Anti-splash feature ƒƒ▪ Plastic dipstick with integrated anti-splash feature ƒƒ▪ Plastic dipstick with integrated magnet
Request for a quoteGermany
Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional
Request for a quoteGermany
The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device
Request for a quoteGermany
The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device
Request for a quoteGermany
The model K 24 is a robust stud welding gun, especially for studs ø 19 - 22 mm Ideal for welding shear connectors Ideal for through-deck-welding td High repeatability Hydraulic plunge damper Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional
Request for a quoteGermany
Fiber-reinforced composites are in demand in all high-end industries in which light weight and at the same time high durability under dynamic load ensure competitive advantages Efficient and reliable press technology for fibre composite plants Whether glass fibre reinforced plastic (GRP) or carbon fibre reinforced plastic (CFRP): The valuable material is mainly used in application fields where weight reduction, fuel consumption,anti-corrosion characteristics and other stress resistency feauters are in focus. The name Siempelkamp also stands for solid and precise technologies in these presses and handling systems as well as for high flexibility due to its suitability for all composite applications such as sheet molding compounds with glass or carbon fibers (SMC), prepreg compression molding with short, long or continuous fibers (PCM), resin transfer molding (RTM), and thermoplastic forming.
Request for a quoteGermany
• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F
Request for a quoteGermany
• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Reinforced glass - Import exportNumber of results
18 ProductsCompany type