Range - Import export

International patent registered for the CLEAN ROOM SYSTEM line (DIN EN ISO 14644-1) The CLEAN ROOM SYSTEM units are linear actuators with belt driven transmission and are specifically designed for Clean Room applications They are supplied with a certificate issued by the IPA Fraunhofer Institute in Stuttgard, which certifies compliance with class ISO 3 (DIN EN ISO 14644-1), or with class Fed Std 0.01 (FED 209 E). The system prevents particles from being discharged in the environment where the linear unit is located. This has been achieved by using a special straight seal that closes the horizontal opening where the slider moves, as well as by the operation of a 0.8 vacuum pump connected to 2 vacuum pipes located inside the drive head and the idle head. The system allows vacuum to be generated inside the unit so that any particles released when the system is operating are sucked towards the air filtration areas. Clean Room System linear actuators components are all made of...

High-performance connectors, signal connectors and several thousands of connector components – the range of industrial connectors in stock allows igus to provide a high level of availability with short delivery times. - Fast delivery - High level of availability - 100% tested and with warranty - Useful tools such as for crimping - Can also be harnessed with cables - Quantities from 1 to high volume production

Good with chemicals d1 [mm]: Rings: Cage: Balls: xiros® material data xiros® polymer ball bearing design, applications, development and testing xiros® chemical resistance xirodur® C160 radial grooved ball bearing The ball bearing material xirodur® C160 offers extreme media resistance, but is inexpensive. xirodur® C160 can be used in the temperature range of up to +80°C. Lubricant- and maintenance-free Resistant to corrosion and chemicals Nonmagnetic and washable Life time predictable Lightweight Low friction Electrically insulating Industries: Electroplating, chemical industry, plant design d1 [mm]: Rings: Cage: Balls:

Crossing of traffic routes and waterways in pipeline construction HDD Assist & Rescue Installation of protection pipes Dynamic pipe bursting Vertical applications Construction of circular support structures for tunnelling Tree relocation

The INFICON Bayard-Alpert passive vacuum gauge heads BAG050, BAG051, BAG052 and BAG053 are designed for use with the INFICON Vacuum Gauge Controller VGC083A & VGC083B. Yttria coated iridium filaments are offered for general vacuum applications in air and inert gases such as N2 and argon. Select tungsten filaments for gases that are not compatible with yttria coated iridium filaments. BAG05x gauges may also be operated with compatible vacuum gauge controllers from other manufacturers. The INFICON passive Bayard-Alpert ionization vacuum gauges (BAG05x) are offered in three different configurations: BAG050 is a EB-degas UHV nude ionization vacuum gauge capable of pressure measurement as low as 2×10 -11 Torr. BAG051 is a resistive degas (I 2R) nude ionization vacuum gauge capable of pressure measurement as low as 4×10 -10 Torr. BAG052 and BAG053 are resistive degas (I 2R) glass enclosed ionization vacuum gauges capable of pressure measurement as low as 4×10 -10 Torr. Reliable and...

The INFICON single Bayard-Alpert Hot Ion Gauge BAG402 covers a wide measurement range from 5×10 -10 mbar to 2.7×10 -2 mbar (3.75×10 -10 Torr to 5×10 -2 Torr). Choose the INFICON BAG402 for affordable and repeatable process to base pressure measurements in a compact active gauge package. The unique, supported dual filaments offer superior accuracy, longtermstability and longevity. 1) Reduced accuracy during degas 2) Simultaneous use of RS232C or VGC40x series controllers and Fieldbus is not allowed

The INFICON Pirani Gauge Enhanced 300 (PGE300) like it's bigger brotherP GE500 is equipped with the latest digital convection enhanced Piranit echnology available on the market. Equipped with the same sensor components as the PGE500, the PGE300 yields the same higher accuracy readings int he measurement range between 100 to 1000 mbar. The PGE300 offers only the critical built-in features that the majority of customers in the vacuum industry are looking for, minimizing costs and maximizing efficiency. This rugged gauge and sensor design, in combination with the factory built in clear readable LED display, 3 selectable analog output signals and a set point relay makes the PGE300 a high value/low cost of ownership choice not only for OEM customers, but all customers. These features qualify this gauge for many applications where an economicalvacuum measurement from low to high vacuum range is required. With its wider measuring range and higher accuracy, especially at lower pressures...

The INFICON Pirani Gauge Enhanced 500 (PGE500) is equipped with the latest digital convection enhanced Pirani technology available on the market. Due to the physical properties of convection this type of Pirani offers higher accuracy in the measurement range between 100 to 1000 mbar. The rugged gauge and sensor design in combination with many factory built in features, such as the bright, sharp and clear OLED display with integrated keypad, RS485/RS232digital interface and 4 selectable analog output signals makes the PGE500 a high value/low cost of ownership choice. All these features qualify this gauge for many applications where an economical vacuum measurement from low to high vacuum range is required. Direct drop in replaces most Granville-Phillips ® Mini-Convectron ® modules (GP275) (Granville-Phillips ® and Mini-Convectron ® are registered trademarks of MKS Instruments, Andover, MA) We are accepting orders from now on! gold plated tungsten, 304 & 316 stainless steel, glass,.

The INFICON Pirani Gauge Enhanced 050 (PGE050) is the passive version of our active convection enhanced Pirani gauges PGE300 and PGE500. Equipped with the same sensor technology, the PEG050 works in conjunction with our VGC031 and VGC083 passive gauge controller units to produce the same higher accuracy readings in the measurement range between 100 to 1000 mbar. With its wider measuring range and higher accuracy, especially at lower pressures, the PGE050 is the first choice when replacing thermocouple gauges in your vacuum system. The rugged gauge and sensor design makes the PGE050 a high value/low cost of ownership choice and qualifies this gauge for many applications where an economical vacuum measurement from low to high vacuum range is required. TEST Direct drop in replaces Granville-Phillips ® Convectron ® gauge sensor (same plug/ pinouts) (Granville-Phillips®, Convectron® and Mini-Convectron® are registered trademarks of MKS Instruments, Andover, MA) PGE050 accepts...

We supply you with the material cellular polyethylene as blocks, sheets or rolls, further processed into strips, punched parts, molded parts or milled parts, with or without self-adhesive coating. Cellular polyethylene is one of the most versatile and modern cellular materials when it comes to application and processing quantity. That's why we produce and sell an enormous range of cross-linked PE foams in variable densities, many colors and compression hardnesses. In addition, KOPP offers you electrically conductive, static-dissipative and flame-retardant PE qualities. This program is rounded off by high-quality EVA and a unique EPDM-PE blend. The material cellular polyethylene All of our cellular polyethylene qualities combine the positive properties of a plastic: high aging resistance, high chemical resistance, low emission values, exceptionally uniform density, they are odor-free and can be thermoformed.

Laser cutting parts and bending parts: Your special production in good hands. As part of the Schulz Group, Schulz Stanztechnik can also offer you – as a service and in addition to the stamping program – special laser cut parts in various materials and thicknesses. In accordance with your drawings, you will receive a meaningful offer from us within three working days, and your laser parts within ten working days of your order. Manufacture of 2D and 3D laser parts made of the most diverse of materials as well as angles in accordance with your drawings and specifications.

We take the right turn! In the area of ​​turning technology we can offer you a spectrum of prototypes, zero series and small series as well as the production of large series as a powerful partner. We process all materials, e.g. Such as automatics, tempering, stainless steels, aluminum, brass, copper and more! Max. Diameter when working rod and / or coil: Ø 65 mm Max. Diameter when machining sections: Ø 380 mm Max. Working length: 500 mm All common heat- and surface- treatments possible Assembling and more…

Material Schulz Stanztechnik manufacturers these axial ball bearings using the materials suited to the specific application. For the housing, steel, brass or stainless steel are used; for rings, steel or stainless steel which is always hardened. The balls are made of chrome or stainless steel, which is also always hardened. All material combinations – depending on their conditions of use – are possible for the assembly of the individual parts. Various surface coats for the individual parts can be supplied as well as finished bearings: brass which is uncoated or nickel plated; steel and stainless steel which is uncoated, zinc plated or nickel plated. All bearings are available lubricated or unlubricated. Structure DLG100 axial ball bearings consist of sheet metal housing, two hardened rings as well as hardened precision balls. Due to their structure, we refer to them as an encapsulated, full ball design.

Tool making & construction: The key to success We know the different industry-specific requirements for stamped parts and parts suppliers. Therefore, our day-to-day work includes very demanding tasks, which we overcome speedily and process reliably. Our spectrum of services for tool construction includes: 3D-CAD/CAM construction and programming (solid works, Peps, HSMworks) Wire-cut EDM (also contract manufacture) with workpiece sizes up to max. 600x400x350 mm Drilling erosion (start hole shooting) with workpiece sizes up to max. 250x350x300 mm Milling technology with workpiece sizes up to max. 650x500x500 mm Turning technology with workpiece sizes up to max. dm 210 x 1000 mm Flat grinding with workpiece sizes up to max. 600x300x375 mm and more…. Even complicated customer requirements are never a problem for us, but are instead a welcome challenge.

The INFICON single Bayard-Alpert Hot Ion gauge BAG302 covers a wide measurement range from 1.3 × 10 -9 to 6.7×10 -2 mbar (1 × 10 -9 to 5 × 10 -2 Torr). The compact All-In-One Hot Ion gauge BAG302 offers an easy to exchange dual filament sensor, a built in OLED display, set-point relay and a log-linear analog output as well as an integrated RS485 digital interface for increased integration flexibility. These features combined with the rugged design makes the BAG302 an affordable and repeatable process to base pressure measurement instrument of its own and provides a high value/ low cost of ownership choice. (Granville-Phillips ® and Micro-Ion ® are registered trademarks of MKS Instruments, Andover, MA)

The INFICON Bayard-Alpert Pirani Combination Gauge, BPG400, functions as two gauges in a single compact unit measuring from 5×10 -10 mbar to atmosphere (3.8×10 -10 Torr to atmosphere). Combining technologies reduces the complexity of installation, setup, and integration. Choose the BPG400 for affordable and repeatable process to base pressure measurements in one economic package. 1) Reduced accuracy during degas 2) Simultaneous use of RS232C or VGC40x controller series and Fieldbus is not allowed 3) For RS232C operation <30m

Stamped parts / contract manufacture Your products delivered punctually As a flexible stamping business, Schulz Stanztechnik manufactures various stamped and stamped bent parts for the most diverse areas of application from conveyance technology components, the automotive industry to mechanical components such as washers and angle connectors or entire assemblies. We place particular emphasis on high-quality and punctual manufacture and delivery of the ordered products and services. We are also in a position to meet special requests of our customers at short notice. Alongside the actual stamping process, Schulz Stanztechnik carries out numerous additional tasks, such as the creation of threads, use of installation parts or the installation of several components to the stamped parts. These activities can be carried out during stamping as well as in a separate work process.

Around installation technology, cable clamps for the fastening of HF cables to telecommunication masts are our speciality. These cable clamps consist of a C frame including retaining feet (for installation on to a C-profile or flat bar) and a fastening screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied. C frame The C frames are stamped bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm. Inlay The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw.

Unsere Universal- Spülkastenventile können als Füllventil in jeden Auf- und Unterputzspülkasten verbaut werden. Das Wassersparprinzip steht neben Zuverlässigkeit an erster Stelle. Qualitätsgeprüft sind die Füllventile sehr geräuscharm und zertifiziert nach FS-Klasse I.

The Loresta GX is used to measure conductors and semiconductors in the lower resistance range. Measuring range: 10^-4 – 10^7 Ω. It is used to measure the surface resistivity (Ω / □), the volume resistivity (Ω · cm), electrical conductivity (S / cm) in the low-resistance range. The Loresta-GX works according to the 4-pin measuring method. The method is based on the four-wire method and was developed to eliminate the influence of contact resistance. The measuring heads consist of four needle-like electrodes. To simplify the measurement method and calculate the correction factors, all four electrodes are at an equidistant distance from each other. Conductive Materials: Paints, pastes, paints, printing ink, Smart Textiles, Plastics, rubber Film materials, metallic thin films, metallised films, resistor pastes amorphous silicon / silicon wafer, antistatic materials, EMC shielding materials ...

The grid | power V H series is particularly suitable for UPS applications with discharge times in the short-time range (1 minute to 3 hours) without falling below the permitted final discharge voltage. grid | power V H is the optimum solution for high-current applications and partial-cycle use. It is typically used in power plants and energy supply systems, UPS and switchgear. Extremely extended water refill intervals up to maintenance-free, high-energy density and long service life characterize the grid | power V H batteries. In summary, the grid | power V H can save time and resources and reduce investment costs.

The Geck disinfection system Aguarico is an optional mobile display to enable mobile disinfection use and to protect you and your customers or employees in highly frequented locations. Our product portfolio includes disinfection systems with pump dispensers for manual operation and SensorTouchcontrolled systems that can be operated without contact. Both systems are currently available, we look forward to your inquiry. Contact us at any time via gesundheit@geck.de or visit our website https//www.geck.de/en/healthpreventionsystems.

Spring isolators can be used for source and sender vibration isolation. The springs are manufactured of a special spring steel wire and KTL coated. Every spring isolator can be provided with an additional damping cushion of stainless-steel. Elemente with a frequency range between 3-4 Hz can be provided with a viscous damping, too. Spring isolators with a natural frequency range of 3-5 or 4-6 Hz are especially made for higher forces. They can be expanded in size and load-capacity without any difficulty. Spring isolators of RG+ are available for four different natural frequency ranges: Spring isolators with a natural frequency of 3-4 Hz Spring isolators with a natural frequency of 5-6 Hz Spring isolators with a natural frequency of 7-9 Hz Spring isolators with a natural frequency of 3-5 or 4-6 Hz

Stable, flexible and economical. This series will win you over with its special stability and performance. Individual pieces and small series can be produced in an extremely economical manner with this machine concept. The use of highvalue components ensure the machine's durability.

Thanks to a wide range of accessories, Hense operators can be individually configured for a wide variety of applications and optimally matched to the function of the overall system. To ensure perfect and safe operation, we are on hand to help you select and optimally coordinate all components.Servo valves, proportional valves and switching valves with different nominal sizes Pulsation damper for smoothing vibrations and uneven flow rates Subplates for positioning valves and pulsation accumulators close to the motor High-resolution rotation angle sensors that are coupled directly to the swivel motor shaft by means of a torsionally rigid coupling Pressure sensors Torque measuring shafts or reference torque measuring disks Clamping sets, shrink disks or profiled hubs for torque transmission Torsionally rigid couplings for reliable torque transmission with simultaneous shaft displacement Angled flanges for mounting the swivel motors parallel to the axis

The use of servo-hydraulic controls can significantly extend the range of applications for swivel motors. Larger loads can be slewed in a shorter time than is possible with purely hydraulic systems, where the damping travel is fixed. In conjunction with such a control system, the acceleration and braking behavior of the swivel motors can be specifically adapted to the requirements. This means that even fast and very precise movements with large masses can be safely mastered. We offer customized solutions for a wide range of applications. Our qualified team will be happy to advise you on design and realization.

In our range of fasteners and axles you will find quick-release axles, quick-release axles, indexing pins, pull-catches, clamping levers, clamping levers, wing screws, star handles and hand screws in various sizes and designs. In addition to our standard range, we also manufacture customised products or adapt our existing products with our many years of know-how in the industry, not only according to the wishes of our customers, but also according to the latest European norms and quality standards. Do you have any questions about our products or would you like to request a quotation? Just contact us. We have the right fastening for almost every application!

Air-filled tyres offer a high level of driving comfort, even on uneven ground surfaces, and are characterised by their low dead weight combined with high load-bearing capacity. Our products are certified and tested according to the latest European norms and quality standards. Would you like to make your pneumatic tyres puncture-proof? No problem for us. With our Rolko-SMART tyre filling made of soft-elastic polyurethane, we make your wheels 100% puncture-proof, with comparable driving characteristics of a pneumatic tyre. You can find more information about our products and services in our catalogues. Do you have any questions about our products or would you like to request a quote? Please feel free to contact us. We have the right tyres for almost every application! Translated with www.DeepL.com/Translator (free version)

The main function of a shrink disc is the safe connection of a shaft with a hub by means of friction. For example, between a drive shaft and a transmission hollow shaft. The shrink disc generates a backlash-free connection by pressing the hub onto the shaft. This connection is mainly used to transmit torque. The shrink disc only provides the required forces, and transfers no forces or moments between shaft and hub by itself. Therefore, the force flow does not pass through it. It is installed by sliding the shrink disc onto the hollow shaft and the subsequent tightening of the screws. By using conical surfaces the inner diameter reduces and the radial pressure is built up. The 31xx range of shrink discs are self-locking. The clamping forces are provided and controlled through the screws (force controlled). This allows the direct compensation of the clearance between the shaft and hub, without an overload that may occur on path controlled shrink discs, due to small or over sized...