Protective sleeves - Import export

This protective sleeve sits firmly on the lifting strap and therefore stays in its position when the lifting strap is in contact with the load. The contact side is coated with secutex which is extremely tearresistant and reduces the formation of creases in the textile strap. The reverse side is coated with Powerflex and protected against abrasion and penetrating dirt. The very flat form and resistance to bending in a longitudinal direction make it simple to insert the SFXequipped strap into small gaps. The firm grip prevents unintentional slipping.

Item No.: 685633 Protective sleeve Specification Protective sleeve Webbing set, stitched Model type: C (Customised) Dimensions: approx. 50 x 45 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Laser-cut contoured cutting

Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularlyrobust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.

secutex protective sleeves are vital when turning over coils. The lifting strap is attached to a crane hook and attached to the load with the secutex protective sleeve. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. This means that turning the load 90° is possible without any problem whatsoever. If the load is paced to the other side according to the same principle, it can be also be turned by 180°. The lifting strap can slide through the protective sleeve during the turning process. The protective sleeve and load, however, remain in constant contact. Our tips for safe turning – The lifting strap is exactly at „12 o‘clock“ over the centre of the coil. – Only individual, unpackaged and cleanlywrapped coils may be turned. – A nonslip surface, such as the secutex turning mat (cf.p. 102] must be used. – The coil must be prevented from rolling in or sliding perpendicularly to the lifting strap.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.

The secutex clip [SC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clip [SC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.

The Clipon sleeve easyClip [ESC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clipon sleeve easyClip [ESC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used. The smaller wave size means that the thick coating is more flexible in the bending direction.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

Fixed protective sleeve with movable fixed coating The new patentprotected secumove coating combines the advantages of a protective sleeve and a sleeve with a fixed coating. The protective secutex coating is firmly attached to a loop of the lifting strap. The other end of the lifting strap slides freely through the sleeve and is used to equalise the lengths. secumove thereby ensures that there is no movement over “sharp edges”. No movement, no wear when nothing moves, nothing becomes worn. The service life of the newlydeveloped secumove coating is therefore significantly increased, even when used with rough loads. secumove is optionally also available with proven metal plate reinforcement for “critically sharp edges“. For these heavy duty loads, we recommend specialist onsite advice. Important uses include, for example, the careful lifting of loadbearing trusses or sheet packages and coils. secumove is not suitable for turning.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

The secutex chain sleeve protects the chain (sandblasting) and the slinger. The protective hose is not well suited for the intensive use and transport of sharpedged parts due to the high surface pressure and the lack of reinforcement. Please note The chain hoses are designed for chains of quality class 8 that conform to standards.

Machine elements and casted parts must be turned frequently during the manufacturing process and for shipping. The components are getting bigger and bigger and the demands on quality and time are getting higher and higher. Expensive cranes are often blocked for hours for the challenging turning operations and a large part of the production areas cannot be used during this time. SpanSetsecutex coatings for lifting slings and protective sleeves are used daily for lifting and moving sharpedged loads. For the safe and economical turning of heavy and difficult loads, secutex has now developed the turning slings with the new secuWave coating (patent pending). The unique feature of the secutex turning slings is the new wave profile. It combines the wellknown advantages of secutex coatings – excellent cut resistance and flexibility as well as a very high wear and abrasion resistance

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.

The VA 40 variable area flowmeters are suitable for measuring liquids and gases The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly and observe the medium. The suitability for measuring the flow of gases in accordance with the DVGW G260 process sheet has been certified by the DVGW testing station at the Gas-Fired Thermal Institute in Essen.

Flowmeters especially for gases The VA 45 variable area flowmeters were designed to measure gases. They can be used, for example, in industrial ovens, forges and furnaces, and protective gas and heating systems. The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly.

This high-quality stainless steel cap can be used to hide an ABS-Lock I+II system sleeve that is permanently installed in the subsurface. Not only does it look great - it also protects the sleeve from dust and other contamination. The cap closes automatically, if it is installed on a wall. Protective cap for our ABS-Lock II model High-quality stainless steel material Ø 40mm Closes automatically, if installed on a wall

-driven by forklift hydraulic system -variable gritting range; can be adjusted by varying height and angle of inclination of mast -stirring mechanism -protective grid as cover -fork sleeves for pick-up by a forklift truck