Protective sleeves - Import export

This protective sleeve sits firmly on the lifting strap and therefore stays in its position when the lifting strap is in contact with the load. The contact side is coated with secutex which is extremely tearresistant and reduces the formation of creases in the textile strap. The reverse side is coated with Powerflex and protected against abrasion and penetrating dirt. The very flat form and resistance to bending in a longitudinal direction make it simple to insert the SFXequipped strap into small gaps. The firm grip prevents unintentional slipping.

Item No.: 685633 Protective sleeve Specification Protective sleeve Webbing set, stitched Model type: C (Customised) Dimensions: approx. 50 x 45 mm Material: Polyester Colour: black Property: non-elastic Packaging: loose in cardboard box Note Features: Laser-cut contoured cutting

Our coated protective sleeves will convince you with performance.

Heat protection sleeves and mats extend our expertise in protective aluminum flexible tubing to other shapes and uses. Layers of aluminum foil are combined with fiberglass for products that can withstand temperatures up to 750°C.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Boron nitride can be long-term used at 1800 degrees under vacuum atmosphere. With gas protection, Boron Nitride can be used at 2100°. Boron Nitride is with high thermal shock resistance, no cracks under extreme cold & high temperature. If you take out Boron Nitride from 1000 degree furnace and colding it within short minutes. It still won't break even repeat this test with 100 times. Material Properties： * High thermal conductivity * Excellent thermal shock resistance * Low thermal expansion * Exceptional heat resistance * Good Chemical Inertness * High electrical resistance * Low dielectric constant and loss tangent * High volume resistivity * Excellent machinability Grades 5 grades of boron nitrides are involved in Boron Nitride product series. * BN99 ● CABN ● ALBN ● ZRBN ● ZABN ● SB

We offer custom printed card sleeves with RFID protection. We print them digitally so we sell them at excellent price even for small runs. We print card sleeves for credit cards, guft cards and all kinds of platic cards similar size. Delivery to all EU countries

If you want to protect your products in glass packaging during transport, you should definitely check this bottle packaging idea. Glass protector - SLIVV is a perfect solution which is adapting to the shape of the packaging. Jar bottle eco protector slivv provides full protection from the bottom to the top thanks to the special flaps function. It enables you to transport your bottles both horizontally and vertically. All materials used in the production of bottle protection are reciclable and can be reused. The sleeves can be used many times, thus supporting zerowaste. All the papers we use come from controlled forests. The main goal is to protect glass packaging against accidental breakage and to keep all labels and tags in excellent condition. Slivv is an ecological form of packaging and securing products for shipping. They are perfect for the cosmetics, ceramics, hand made fragile items and alcohol industries like wine, liquor. We offer wide range of sizes- perfect for your brand.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

The Powerflex protective sleeve helps to effectively increase the friction values of smooth surfaces or to protect the lifting strap against rough surfaces. The particularlyrobust Powerflex penetrates deep into the fibres and also protects the protective sleeve against the penetration of fluids or dirt particles.

secutex protective sleeves are vital when turning over coils. The lifting strap is attached to a crane hook and attached to the load with the secutex protective sleeve. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. This means that turning the load 90° is possible without any problem whatsoever. If the load is paced to the other side according to the same principle, it can be also be turned by 180°. The lifting strap can slide through the protective sleeve during the turning process. The protective sleeve and load, however, remain in constant contact. Our tips for safe turning – The lifting strap is exactly at „12 o‘clock“ over the centre of the coil. – Only individual, unpackaged and cleanlywrapped coils may be turned. – A nonslip surface, such as the secutex turning mat (cf.p. 102] must be used. – The coil must be prevented from rolling in or sliding perpendicularly to the lifting strap.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

This protective sleeve is particularly robust and has two contact sides in this version for work on both sides. Both contact sides are coated with secutex. They are extremely resistant and minimize the buildup of wrinkles in the textile. Use of the protective sleeve is no longer necessary.

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.

The secutex clip [SC] can be quickly mounted thanks to mounting slots on the backside. On a case to case basis, it is preferably used in places where round slings or protective sleeves are required. Important The clip [SC] offers simple handling and quick setup times. The secutex protective layer can be placed softly and flexibly on the load, increasing the radius on critical edges. Leverage force can be extensively distributed and the load remains undamaged.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used. The smaller wave size means that the thick coating is more flexible in the bending direction.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used.

In addition to loads with rightangled edges, there are also transportable goods with different geometry. These include loads with projecting spines and with sharp or jagged external contours such as gearwheels, turbine blades, etc. These edges are not addressable using normal approaches. The secuwave protective sleeve was developed for components with extremely critical edges. secuwave increases the deflection radius. The „sharp edge“ has no contact with the protective sleeve and thus cannot cut it.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

Fixed protective sleeve with movable fixed coating The new patentprotected secumove coating combines the advantages of a protective sleeve and a sleeve with a fixed coating. The protective secutex coating is firmly attached to a loop of the lifting strap. The other end of the lifting strap slides freely through the sleeve and is used to equalise the lengths. secumove thereby ensures that there is no movement over “sharp edges”. No movement, no wear when nothing moves, nothing becomes worn. The service life of the newlydeveloped secumove coating is therefore significantly increased, even when used with rough loads. secumove is optionally also available with proven metal plate reinforcement for “critically sharp edges“. For these heavy duty loads, we recommend specialist onsite advice. Important uses include, for example, the careful lifting of loadbearing trusses or sheet packages and coils. secumove is not suitable for turning.

We recommend against turning stacked coils upright on the stack. The first choice for the raising of packages delivered in a horizontal position with split straps is therefore always a coil turning seat. However, there is not always a fixed installation for raising narrow coils. The secutex splitband turning strap has two different attachment ends. One end loop of the secutex lifting strap is flat, and can be easily threaded through the gap between the split bands. The flat end loop can then be easily hooked into the forged Cshackle. The protective sleeve is positioned against the “sharp edges“ of the coil. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. There is no movement, and therefore no wearing against the “sharp edges“. The solution An end loop of secutex lifting slings for slit strips is flat and can easily be pushed into the gap between the slit strips.

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

The round slings comply with DIN EN 14922. They are made of highstrength endless polyester fibre cords. These polyester fibre cords are protected by a sturdy and seamlessly woven polyester sleeve. This sleeve surface is also impregnated with polyurethane to make it abrasionproof. The working load limit (WLL) and the cord tonnage (tonne capacity per cord) are either woven into or printed on the protective sleeve of the sling. The safety label with the CE mark and technical data is firmly sewn onto the sling. The colour of the round sling corresponds to the colour code scheme for load capacities of textile type slings. These round slings have high UV resistance and low moisture absorption. These round slings carry the CE mark according to the European machinery directive.

Axial expansion joints compensate assembly tolerances and thermal longitudinal expansion in the direction of the tube axis. Depending on the design, they can be impinged with pressure internally and externally. Using a guide sleeve protects the metal bellows from abrasive media or flow-induced oscillations. The reaction forces caused by the internal pressure must be absorbed by sufficiently dimensioned anchor points.

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

The secutex chain sleeve protects the chain (sandblasting) and the slinger. The protective hose is not well suited for the intensive use and transport of sharpedged parts due to the high surface pressure and the lack of reinforcement. Please note The chain hoses are designed for chains of quality class 8 that conform to standards.