Pots - Import export

Special machines for the automotive and supplier industry Machine system for low pressure molding - electronics encapsulation The FLEXline series offers maximum flexibility through the modular design of various variants as well as expanded options for implementing special functions. The adaptation or addition of individual mechanical components is just as possible as special programming or integration into a complete production line. In addition, various application systems are available, including hot runner systems with different nozzle geometries and arrangements. The melting units can be optimally tailored to the requirements of the respective project with different melting and conveying systems and, if project requirements differ or change, can be replaced at any time using our "plug-and-play" system. Extensive peripherals and additional options round off the system. The FLEXline can therefore be optimally tailored to the requirements of the respective project.

Special machines for the automotive and supplier industry Machine system for low pressure molding - electronics casting The BASEline series combines a compact design and convenient operation and can be used optimally for the majority of low pressure molding projects. Various mechanical components can be put together depending on requirements. The adapted melting device with double-acting piston pump, 4l tank volume and a melting capacity of approx. 1kg/h enables optimal processing of small to medium shot weights and/or quantities. The available clamping force of 9/12kN is suitable for casting surfaces up to approx. 3,000mm². By using the Siemens S7-1200 control with touch panel, the series offers the same ease of use as the larger series.

Optimel is your reliable partner for solutions for encapsulating electrical and electronic assemblies. The innovative Low Pressure Moulding (LPM) technology offers optimal protection against external influences such as moisture, dust and vibrations, thus ensuring the longevity and reliability of your products. The Low Pressure Moulding process or hotmelt moulding process originated in the sealing of cable harnesses in the automotive industry - today it is used in many areas for the protection of electrical and electronic components. At 5-40 bar (in individual cases up to max. 60 bar), processing takes place at a much lower pressure than in the classic hotmelt injection moulding process. This makes it easy to directly encapsulate even sensitive components such as circuit boards, sensors, etc. The cycle times are limited to pure encapsulation

The plastic insert 12105 serves as a screed placeholder for the 8601A floor socket and is made of PVC.

The CUSTOMline hot melt machine is the top solution for customized casting requirements. It is configured specifically according to customer requirements and can handle complex casting tasks with exceptional precision and efficiency. This machine is ideal for special applications where standard solutions are not sufficient. With the CUSTOMline you get a casting machine that is tailored precisely to the specific needs of your production process in order to achieve optimal results. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesives, hot melt packaging, hot melt adhesives, special machines for adhesive processing, hot melts, machines for gluing, machine for gluing, melt casting technology with hot melt, hot melt coating, gluing machines, special machines for casting, sealing, foaming, gluing, special packaging machines]

In order to get started with low pressure molding technology, for prototyping new projects and producing small series, Labline offers a selection of small devices tailored to the requirements of low pressure molding technology. The basis here is the hand-held casting gun with a 0.2l tank for filling the casting materials in granulate form. In order to achieve process stability and reproducibility even with this manual processing, a timer can be connected. Two different clamping devices are available for convenient handling of sample and pre-series tools. product [hot melt application systems, hot melt coating machines for paper, hot melt, hot melt adhesive, hot melt adhesives, special machines for adhesive processing, hot melt packaging, machine for gluing, machines for gluing, hot melts, gluing machines, hot melt coating, gluing machines for labels, laboratory coating machines, systems for adhesive technology]

The decisive factor for the technical implementation of every project is the appropriate casting tool. Each one is individually developed, designed and manufactured for the respective project. Our experienced designers and project managers are always available to advise you! Low Pressure Moulding Tools

At OptiMel, you get everything from a single source to optimally use low pressure molding technology for high-quality electronics encapsulation. Thermoplastic hot melts are used as encapsulation material. Due to their range of properties, amorphous thermoplastic polyamide granules are predominantly used in low pressure molding. Thermoplastic polyolefins are also available for special applications, which are used whenever sufficient adhesion cannot be achieved with the preferred polyamides on the substrates used (e.g. cross-linked polyethylene). Due to different raw material combinations, the range of properties of these hot melt granules varies in terms of mechanical strength, operating temperatures and resistance to various media. The hot melt molding materials combine a viscosity spectrum that is favorable for the low-pressure process with a wide operating temperature range (-50 / + 150°C) and, in some cases, very good adhesive properties. Depending on the material

Hotmelt Extruder OptiMel has developed an extruder system that is specially adapted to the conditions and parameters in electronics encapsulation. A special design uses the advantages of the extruder when melting the materials and implements the injection via an additional piston unit. This process avoids pressure peaks and combines the advantages of extruders with the requirements when processing sensitive electronic components. product [extrusion tools, extrusion tools, hotmelt application systems, extrusion tool, extrusion tool, plastic welding extruder, hotmelt adhesive, extruder systems, extruder system, extrusion machines, hotmelt, hotmelt adhesives, extruder construction, extruder pumps, extrusion machine]

Strong Neodymium Rectangular Pot Magnets with Countersunk Hole Magnets The neodymium pot magnet holder magnet is made of a super strong neodymium magnet encased inside a chrome plated steel cup. The neodymium magnet is bonded inside of the cup with adhesives. At the same time, the steel cup also protects the magnet from being damaged when frequently used. The counter sunk hole on the magnet is provided for easy applications.

The advantages of Ferrite Magnet hook 1 easy to be produced and assemblied 2 can handle heavy things 3 lower cost and useful for daily life 4 customized designs are acceptable 5 samples are avaible 6 prompt delivery and good after service

1. A deep cylindrical permanent magnet assembled concentrically in a mild steel pot with spacer of Aluminum or Copper. 2. These magnets are primarily for gripping applications. 3. Magnet material used is Alnico 5, working temperature is up to 250 ° C. North polarity in center of holding face and each magnet has a coated keeper 4. Outer surface except pole can be red (smooth or wrinkle) painted, or coated with Zinc, Nickel or Chrome We have accumulated abundant experience and established stable and credible business relationships with customers worldwide. With rich experience in dealing with all types of large and small orders, we have developed extensive contacts with many local and international freight organizations. Consequently, we are able to ship our goods safely and reliably to almost anywhere in the world

The rubber coated pot magnet is made of small neodymium disc magnets, steel plate, and rubber. These disc magnets are embedded in the steel plate, and then the whole steel plate is coated with rubber. The steel plate well concentrate and enlarge the magnetism of these magnet discs. The rubber which covers the magnets and steel plate protects the magnet from corrosion and also well protect the delicate objects that contact pot magnet from scratch. For the Black Rubber coated pot magnet,Also could be classified as threeRubber Covered Neodymium Pot Magnet with External Threaded Stem,Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is protruded, and Rubber Covered Neodymium Pot Magnet with internal Threaded hole which is no protruded.It consists of iron plus strong Neodymium magnet and Black Rubber.

• with wide stainless steel brim • the long handle and the well-worked out wire loop make sure that the sieve sits well on pots and bowls

• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F

• from high quality PPA, glass fiber reinforced • ideal for coated pots and pans • heat resistant up to 270°C / 518° F • comfort-soft-touch handle

We are producing pot using natural raw materials Hogla, Seagrass, Bamboos, Palm, Banana Fiber, Jute etc. In different sizes and shapes. Our baskets are produced under Fair Trade, BSCI & ISO 9000 certification.