Weighting systems - Import export

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

Heavy duty energy feed to the ocean floor. e-chain® for enormously high torque as hanging use with up to 200 m length is possible. Very flexible and adaptable setup, so that large hoses and cables can be guided reliably. -For very high tensile forces -Hanging applications up to 200 m length -Very resistant against dirt and mud -Resistant to salt water and dirt -Very flexible and adaptable -For underwater applications Typical applications: -Offshore -Drilling ships -Oil platforms -Harbours -Ships in general The specially developed, media-resistant and flexible offshore e-chain® from igus® routes even cables with large diameters safely to the application. The heavy duty draw cable holds the weight of the system. Intensive tests in the igus® laboratory have proven the extraordinary load bearing capacity of the offshore chain.

JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option

Motorized rotation Hydraulic wedge type expansion Highend arbor with double bearing Extremely stiff design SHDH Series PullOff Reel with manually adjustable brakes SHDR Series Payoff Reel with threephase motor Pneumatic or hydraulic hold down arms Electromotive or hydraulic traveling feature w optional automatic centering Hydraulic coil car and fullsize back plates Conical keeper rolls w optional motorized travel Larger mandrel heights and segments Vectorcontrolled drive systems for heavy coil weights Servo drive and control systems, etc.

Movable keeper arms for coil guidance and centering Most durable hydraulic wedge type expansion, easily operable even under weight Highestquality reel arbor with doubled maintenancefree bearing and minimal deflection Sturdy and warp resistant body in welded construction for highest stability SHH Series PullOff Reel with manually adjustable brake and auxiliary drive to support coil setup SHR Series Payoff Reel with threephase motor and frequency inverter for continuous operation Pneumatic or hydraulic hold down arm Electropneumatic brake system Electromotive or hydraulic traveling feature Hydraulic coil car Concical keeper rolls w optional motorized travel Larger mandrel segments Different mandrel heights Fullsize back plate Vectorcontrolled drive system for heavy coil weights Servo drive and control system Loop control systems...etc. Double End Coil Reels w 180° turning radius Horizontal Coil Reels Recoilers Custom Layouts and Features

The use of aspheres and acylinders offers substantial advantages: minimization of aberrations, increase in efficiency, reduction of optical elements and weight of the optical system. With its unique molding technique, INGENERIC combines cost effectiveness with highest serial precision. Molded optics can be structured/curved on one or both sides with a large degree of geometrical freedom and a flexible lateral contour. The lateral dimensions range approximately from 2.0 mm to 5.0 mm. Structures in the sub-millimeter range are feasible. Acylinders with larger dimensions are manufactured by INGENERIC’s well-proven grinding and polishing technology. The dimensions of these large acylinders can reach 60.0 mm in length and 120.0 mm in height. This technology is particularly adept for the manufacture of fused silica optics for applications with high power densities.

The SMFS-U-030 is a Mobile Filtration System mounted on a robust Steel frame push cart, which means the perfect compromise between flexibility on the one hand and highest nominal flow rates on the other hand. Replacement Filter Elements ▪ Filter Elements of the Spin-On series SFC-57/58 ▪ Micron rating available from 3 ... 125 μm ▪ Also available with a blank filter element (SFC-5700) for the reason of used oil to be removed from the hydraulic reservoir Clogging Indicator ▪ Visual Pressure Clogging Indicator Type SIM 04 Lance ▪ Length 450 mm / 17.72 in Hose ▪ Available length 3 m / 9.84 ft incl. ports Construction ▪ Mobile filter system - mobile unit Weight ▪ 58,5 kg / 129 lbs Nominal Flow Rate ▪ Max. 30 l/min / 7.5 US GPM (depends on the viscosity of fluid) Motors ▪ 230 V AC 50 Hz or 400 V AC 50 Hz ▪ 0,75 kW; 1400 U/min Media Compatibility ▪ Suitable for mineral oils, other fluids on request

The SMFS-P-015 supplement the range of STAUFF products, which is a portable hand-held Mobile Filtration System. Due to it‘s compact and light-weight design, it can be used very flexible and consistenly provides best filtration performance at the same time. Replacement Filter Elements ▪ Filter Elements of the Spin-On series SFC-35/36 ▪ Micron rating available from 3 ... 125 μm ▪ Also available with a blank filter element (SFC-3500) for the reason of used oil to be removed from the hydraulic reservoir Clogging Indicator ▪ Visual Pressure Clogging Indicator Type SIM 04 Lance ▪ Length 150 mm / 5.91 in Hose ▪ Available lengths: 1,5 m / 4.92 ft or 2 m / 6.56 ft incl. ports Construction ▪ Mobile filter system - portable unit Weight ▪ 33 kg / 73 lbs Nominal Flow Rate ▪ 15 l/min / 4 US GPM Motors ▪ 230 V AC 50 Hz or 400 V AC 50 Hz ▪ 0,75 kW; 1400 U/min Media Compatibility ▪ Suitable for mineral oils, other fluids on request

This brightly-coloured barrier chain (black/yellow) serves to mark the edge of a fall danger zone. The chain (8 mm) is made of weather-resistant synthetic material. The stainless steel posts are weighed down using special UV-resistant plastic weights. Stainless steel posts with specially-designed UV-resistant plastic weights Weather-resistant synthetic barrier chain Gate post equipped with a carabiner for opening and closing the system Warning plate (224 x 124 mm) Minimum distance to the edge: 2 m Posts can be placed up to 5 m apart

Use this guard rail system to secure the edge of your roof, a domed rooflight or other fall danger zone on a flat roof surface (pitch of up to 10°). The handrail is 1100 mm high and made of high-quality aluminium and stainless steel material. Installation is done using a set of plastic or concrete weights - without penetrating your roof surface. EN 13374:2013, A Suitable for roof pitches of up to 10° Distance between the posts: Max. 2.50 m Plastic weights 760 x 800 mm (2 x 25 kg); Weight of the system per m: 30.68 kg Concrete weights 790 x 280 mm (2 x 29 kg) Incl. special fleece material for surface protection

Siempelkamp hydroforming presses are used for the production of complex and intricate workpiece shapes. This complexity relates to both longitudinal and cross sections. Next to large batch production in the automotive industry, the tting industry is one of the numerous application areas for this type of press. Compared to conventional forming methods, the forming possibilities are signicantly increased when forming with high pressure. Features hydraulic clamping forces: < 100 MN high pressure intensier: < 10.000 bar axial forces / axial cylinder: < 5 MN short cycle times due to "quick lling" systems Advantages weight savings of 40 to 50 %, in some cases up to 75 % wall thickness distribution optimized to component requirements high work-hardening continuous material grain ow for optimum component performance high dimensional accuracy

An equaliser ex mat former levels the formed mat thus reducing the weight tolerances considerably Features, function System comprising six equalising rollers Level adjustment Roller tipping to homogenise the forming level in transversal direction Advantages No need for bre recycling w Rendering pneumatic conve Excellent surface texture Consistent mat height Material savings