Weighting systems - Import export

Control sieve is used in grain production facilities (flour mills, corn factories, etc.) to check the product before packaging. These are facilities with low capacity and space problems with a second purpose of use. Safes can be manufactured as 5 and 10 layers. It can be installed anywhere without any problems. WORKING PRINCIPLE It has its own suspension chassis. Thanks to the chassis, the sieve is mounted on the floor. The chassis on which it is hung has a solid construction. It works with a system driven from the bottom center of the sieve. It is operated by the electric motor mounted on the lower rear part of the machine. The swinging diameter of the sieve can be adjusted with the two-weight drive system.

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

Heavy duty energy feed to the ocean floor. e-chain® for enormously high torque as hanging use with up to 200 m length is possible. Very flexible and adaptable setup, so that large hoses and cables can be guided reliably. -For very high tensile forces -Hanging applications up to 200 m length -Very resistant against dirt and mud -Resistant to salt water and dirt -Very flexible and adaptable -For underwater applications Typical applications: -Offshore -Drilling ships -Oil platforms -Harbours -Ships in general The specially developed, media-resistant and flexible offshore e-chain® from igus® routes even cables with large diameters safely to the application. The heavy duty draw cable holds the weight of the system. Intensive tests in the igus® laboratory have proven the extraordinary load bearing capacity of the offshore chain.

Vacuum Stoppering system to minimize entrapped filling & drip-free. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion. Valveless Rotary Piston pump for Hygiene Filling. Contact parts are FDA Approved material and autoclavable. Optional Laminar Air Flow Booth. Optional N2 flushing. Optional FDA 21 CFR Part 11. Optional Realtime Equipment OEE monitoring anytime, anywhere. Optional 100% Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check.

Aseptic Nested Filing Line from De-bagging, De-liding, Filling and Stoppering system. Vacuum Stoppering system to minimize entrapped filling & drip-free. “Trackless” Rubber stopper feeding to eliminate jamming at the track. Statistical Weight In Process Control of filling weight system by tare in / tare out to obtain nett filling weight check. Full Servo Driven for highest flexibility, highest repeatability and operator friendly conversion.

A ViTEQ Loss-in-Weight Feeders are designed to ensure a continuous, gravimetric and high tolerance batch dosing of flowable bulk materials that are not hygroscopic, adhesive or interleaving features. The feeders are sSuitable for many bulk materials including those with the following characteristics: fragile (food products) abrasive (coarse powder, pellets, granulate) difficult to handle (like fibres, glass fibres, pharmaceutical powders) Suitable for wherever precise dosing and weighing of the main components and additives is necessary. Ideal in the following industries: Food & Animal Feed Plastics / Chemicals Pharmaceuticals Advantages & benefits less shear and pressure forces Troughs have a dead space-free design quick and easy cleaning, maintenance-free vibration discharge very gentle weighing (volumetric and gravimetric) highly precise dosing high throughputs Construction Technical data WLW-L WLW-M WLW-H Trough length (mm) 275 - 1.100 275 - 1.100 275 - 1.100 Trough wi

The industrial system Ti3000 will get more than 1.5% more yield as compared to other systems at the tried and tested FESSMANN quality! Completely made of stainless steel and built steamtight out of panels, the Ti3000 is universally usable according to your specific needs. The central unit technology also convinces with its flexibility and best circulation air outputs at short process times.Panel construction and central unit technology for best air and process outputs Higher flexibility in implementation of customerspecific product requirements by smooth fan speeds Higher system capacities by faster process times = higher yield Use of all known supply trolleys for industrial use possible Use of "overlength" supply trolleys and transport frames Automatic door opener serially included Automatic CIP cleaning system serially included

"FPDFWL": MULTIFUNCTION WEIGHT INDICATORS - IP 54/68 Weight indicator FPDFWL, multifunctional and easy to use. It presents a wide range of features and interfaces that make it suitable for different advanced weighing applications in industrial or commercial matters. It is particularly suitable for mobile weighing systems such as pallet trucks or forklifts and for the automotive industry. The indicator is supplied with support bracket with adjustable inclination for use on the table, column, or wall. CE-M approvable (OIML R-76 / EN 45501). Available in the following models: FPDFWL: basic weight indicator with ABS IP54 casing and 25 mm display with 6 digits - AA batteries FPDFWLB: weight indicator for industrial environments with ABS IP68 casing and 25 mm display with 6 digits - internal rechargeable battery.

Transmission of beta rays The weight monitoring and control system measures the weight continuously, without contact, destruction-free and on moving product. The measurement is based on the attenuation of rays from a radioactive isotope through the substrate located in the measuring gap. This attenuation in intensity is an indication of the weight of the product.

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place.

Multifunction counter and floor scales. Capacity from 6 to 600 Kg - Division 2 to 200 grams. MODULAR SCALES FOR COUNTER AND FLOOR "WALL-E" Counter or floor scales complete of multifunction weight indicator FPDFWL BASE 6-digit standard. They have a strong and solid structure and a load of stainless steel. Extremely easy to use and versatile, guaranteeing precision and reliability. They are particularly suitable for the industry and commerce. Available also CE-M APPROVED for sale to third parties, according to OIML R-76/EN 45501. TECHNICAL FEATURES WEIGHING PLATFORM Precise and sturdy structure, suitable for creating scales and automatic weight checking systems for all industrial and commercial applications. Stainless steel top. Standard version works with aluminum cell 3000d with IP65 protection.

JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option

The RotathermCarat achieves particularly highquality baking results thanks to the special rotation technology. The innovative rotation of the trolley in the air flow focusing at the centre ensures products of unparalleled consistency even at extremely high temperatures. With the special air guidance within the system, the RotathermCarat also convinces with the shortest process times – and a capacity increase of 100% as compared to standard baking systems! Best baking results thanks to unique rotation technology Capacity increases of up to 100% Short heating and baking times Up to double trolley loads as compared to standard baking systems Lesser weight loss as compared to conventional systems (amortisation of the investment costs through weight loss saving alone possible in less than 6 months) Reduction of the area demand Saving heating energy by highquality insulation Optionally installed CIP cleaning to reduce personnel effort

High-precision Aspheres and Acylinders The use of aspheres and acylinders offers substantial advantages: minimization of aberrations, increase in efficiency, reduction of optical elements and weight of the optical system. With its unique molding technique, INGENERIC combines cost effectiveness with highest serial precision. Molded optics can be structured/curved on one or both sides with a large degree of geometrical freedom and a flexible lateral contour. The lateral dimensions range approximately from 2.0 mm to 5.0 mm. Structures in the sub-millimeter range are feasible. Acylinders with larger dimensions are manufactured by INGENERIC’s well-proven grinding and polishing technology. The dimensions of these large acylinders can reach 60.0 mm in length and 120.0 mm in height. This technology is particularly adept for the manufacture of fused silica optics for applications with high power densities. Advantages superior image quality freedom of design free form surfaces integrated...

Movable keeper arms for coil guidance and centering Most durable hydraulic wedge type expansion, easily operable even under weight Highestquality reel arbor with doubled maintenancefree bearing and minimal deflection Sturdy and warp resistant body in welded construction for highest stability SHH Series PullOff Reel with manually adjustable brake and auxiliary drive to support coil setup SHR Series Payoff Reel with threephase motor and frequency inverter for continuous operation Pneumatic or hydraulic hold down arm Electropneumatic brake system Electromotive or hydraulic traveling feature Hydraulic coil car Concical keeper rolls w optional motorized travel Larger mandrel segments Different mandrel heights Fullsize back plate Vectorcontrolled drive system for heavy coil weights Servo drive and control system Loop control systems...etc. Double End Coil Reels w 180° turning radius Horizontal Coil Reels Recoilers Custom Layouts and Features

Motorized rotation Hydraulic wedge type expansion Highend arbor with double bearing Extremely stiff design SHDH Series PullOff Reel with manually adjustable brakes SHDR Series Payoff Reel with threephase motor Pneumatic or hydraulic hold down arms Electromotive or hydraulic traveling feature w optional automatic centering Hydraulic coil car and fullsize back plates Conical keeper rolls w optional motorized travel Larger mandrel heights and segments Vectorcontrolled drive systems for heavy coil weights Servo drive and control systems, etc.

Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.

Net weight filling machines use a weigh scale platform to monitor the weight of product as it is filling into a bottle or container. Net weight fillers are well suited for large container filling applications. This type machine is used for 5kg -30 kg,and 50KG to 300KG, and IBC system liquid filling. both of gravity filling or pump feeding liquid system with weight scale under filling nozzle or under the conveyor to assure filling accuracy. It can finish a series of operations automatically, such as bottle inlet, weight filling, and bottle outlet. Especially for SL, edible oil lubrication. it is a nice choice for foodstuff, pharmacy, cosmetic and chemical industries.Linear type machine, can be made with 2/4/6/8 filling nozzle for different filling capacity.

Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point.

These machines are suitable to the closure in horizontal bags with maximum height mm. 300 and max weight. 5 kg. The welding system with belts PTFE allows the closure of bags made ​​of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is controlled by an electronic temperature controller and the feed speed is adjustable. The distance between the welding and the edge of the bag is 10 mm. The distance (width) between the welding head and the conveyor belt is adjustable and is also adjustable the height of the conveyor belt relative to the floor. The machine is equipped with rotary solid ink marker and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy handling and comes complete with photocell to make the marking at the desired point.

E-LINE A series and E-Line Seismic suspension systems are used in buildings and factories; in concrete or steel structures to support the Busbar, Conduit and Cable Ladder etc. Service and lightweight suspension type variations are available according to the weight of the system to be supported.Together with the evolving installation, it offers optimum solutions for the installation of the support systems.

THESE MASTS ARE NOT TELESCOPIC OR SECTINAL. INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 75 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet these double tube systems can take top loads up to 23kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THESE MASTS ARE NOT TELESCOPIC - INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 75 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet can take top loads up to 11kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

THESE MASTS ARE NOT SECTIONAL OR TELESCOPIC. INSTEAD THEY USE A UNIQUE ROLLABLE COMPOSITE. TRIED AND TESTED BY THE MILITARY FOR 20+ YEARS, NOW AVAILABLE TO NON-MILITARY CUSTOMERS. THE BI-STABLE ROLLABLE COMPOSITE ENABLES THEM TO BE ROLLED UP TO THE SMALLEST PACK SIZES FOR TRANSIT, AS WELL AS MAKING THEM LIGHTWEIGHT AND VERY QUICK & EASY TO DEPLOY AND RECOVER. The System 50 masts offer unrivalled portability, being compact and lightweight with exceptionally fast deployment times, yet can take top loads up to 10kg. The ideal portable solution for mounting lighting or antenna when time, space and weight matter.

Available for System 75 & 100 masts Max height of 13m (with System 100) Compatible with 3.5m IAMs MIL-STD-810G Rolatube’s innovative 3.5m IAM mount kit enables you to raise your 3.5m IAM to previously unattainable heights by mounting it on top of the System 75 single tube mast or System 100 mast. The mount kit enables the user to mount the Rolatube 3.5m IAMs onto System 75 single tube masts (up to 5m) and System 100 masts (up to 10m), thereby enabling the following frequencies at even greater heights: 30-300MHz (SQUAD), 136-470MHz (TEAM) and 136-175MHz (RESQ). Heights achieved are up to 8m on the System 75 masts and up to 13m on the System 100 masts. Manufactured to adhere to MIL STD 810G, the Rolatube 3.5m IAM mount kit is unique to Rolatube Technology, manufacturer of the lightest weight mast systems in the world.

Hydraulic motor Radial piston Displacement [cc] 1240 R.P.M. 30 Capacity (l/min) 40 Max Torque (Nm) 5300 Additional Weight (kg) 350 Tooth system materials: harder and tougher alloy steel.

We design and manufacture equipment for the dynamic classification of weight, used mainly for generating batches and sorting by weight. This type of solution is particularly recommended for the food industry (poultry, meat, ham, fish, fruit and vegetables, etc.). Automatic equipment to classify products depending on their weight. Dibal GW high speed automatic weight grader, with optional classifying system, collects products depending on their weight without stopping the production line (up to 8 defined weight ranges).

It can fill between 50-500 ml. It can fill between 100-1000 ml It can fill between 250-1500 ml It can fill between 1000-5000 ml The system works with pneumatic 7-8 bar air pressure. System milliliter and weight adjustment are provided by sensors. It makes 750-1500 fillings per hour depending on the consistency of the product. Working voltage is 220 volts 50 Hz. Control voltage is 24 volts. The system works automatically and manually. It is guaranteed for 2 years against factory faults.