Ups cable - Import export

We offer cables in different qualities, perfectly tailored to the respective application. The products range from simple PVC up to PUR and PP cable types for food and beverage applications. All cables are available as yard goods or with injection-moulded connectors.

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Cable Type Heaters have initially been developed and used for the safe operation in fertilizer plants. However nowadays, they cover a large range of applications due to their modular construction and minimum space requirements. They are suitable for heating up nearly all gases and liquids or superheating steam. They are mainly used in hazardous areas. Especially when processes require a combination of high power (in the MW range) high pressure and temperatures of up to 550°C cable type heaters are the means to choose.

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

The xiB-64 cameras stream images to the host computer via 8 lanes on a PCI Express Gen3 bus, boasting a 64 Gbit/s sustainable transfer rate. Due to the underlying technology, there is no additional latency and hardly any CPU load.This series does not compromise and is extremely useful where the highest data rates are required, either for simultaneous speed, bit depth, and resolution or for extremely high frame rates. It features high-speed sensors (1.3 Mpix at > 3500 FPS) all the way to ultra high-res sensors with unmatched framerates (65 Mpix at 72 FPS). An integrated 4 GB buffer ensures that no frames are dropped. The cameras can be fully synchronized with their multiple GPIOs. The active EF lens mount adapter enables the combination with a wide array of superb optics, the use of optical fiber cables allows distances up to 100 m between cameras and host computer without any performance penalty and even 300 m with reductions in frame rate.

The xiB cameras stream images to the host computer via 4 lanes on a PCI Express Gen2 bus, boasting an impressive 20 Gbit/s of bandwidth. Together with minimal latencies and CPU load, the PCIe technology is ideal for high resolution CMOS sensors or sCMOS sensors with dual-ADC outputs. The active EF lens mount adapter enables the combination with a wide array of superb optics, with direct control over the aperture and focus. The use of optical fiber cables allows up to 100 m distances between cameras and host computer without performance penalty. - Fast bandwidth of 20 Gbit/s, real data throughput up to 1550 MB/s - High resolution from 12 Mpix to 50 Mpix and 30 to 133 FPS - Versatile mini camera - Subtle 60 x 60 x 36 mm, 160 grams - Long reach - Can work with optical cable at 300 m distances

Table column for two monitors with adjustable height, rotation and tilt of the screens. • Monitor mount for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 360° for working in portrait or landscape mode • The arms can be flexibly extended to 36 cm by three joints and swiveled up to 180 ° • Stepless height adjustment of the screens on a 45 cm high column • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 27“ and up to 8 kg • Cable management: The monitor cable is guided along the monitor mount by clamps, thus protecting against cable breakage

The increasing spread of electromagnetic radiation and the greater sensitivity of modern electronic components mean cable glands have an important role to play in a system's screening concept. PFLITSCH offers a graduated selection of EMC capabilities in its UNI Dicht and blueglobe cable glands for use in EMC applications up to Cat. 7A. The EMC cable gland blueglobe TRI separates the functions of sealing and EMC screening and therefore achieves the highest attenuation values of 80 dB up to 100 MHz. Even in the frequency range up to 2.5 GHz, the values are typically at least 50 dB. High current-carrying capacity is also provided. A triangular spring fits around the cable's braided shielding. The design of the spring precludes its getting caught in the braiding if the assembly is dismantled.

— AC and DC version sensors — Sensing distance / sensitivity adjustable with side potentiometer — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 2 mm up to 13,5 mm — Cable / connector versions — 10 – 36 V DC or 20 – 250 V AC — PNP / NPN or AC versions — NO / NC versions — Short circuit-proof PNP versions — M18 with function/operating voltage indicator

— Flush and non-flush mount sensors in stainless steel enclosure 1.4305 — High switching frequencies up to 1000 kHz — Fully encapsulated versions to protection class IP67 — Temperature range: -25°C up to +70°C — Sensing distances: 1 mm up to 2 mm — Cable / connector versions — 10 – 36 V DC — PNP / NPN versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

For 90° cable entries and safe outlets from switchgear cabinets PFLITSCH UNI elbow solutions enable cables to be taken safely around corners up to 90°. These cable glands have an angled cable gland body made from die-cast zinc or PA plastic. Elbow cable glands achieve the same technical values as the UNI Dicht® standard models. The variants with a rotating coupling can direct the component leg in any direction 360° around the attached leg in order to achieve the best cable entry. PFLITSCH makes these as standard products in sizes M16 to M40 and Pg 9 to Pg 36. To feed cables at an angle into/out of switchgear cabinets or machine housings, PFLITSCH produces various short and long flanged elbows in die-cast zinc and PA plastic. They are screwed tightly on to the housing and can accept – depending on the version – cable glands in sizes M16 to M63 and Pg 9 to Pg 48. An inserted o-ring securely seals the flange to the housing.

— AC and DC version sensors — M32 with programmable output, PNP / NPN and NO / NC — M32 with relay output and timer version — Potentiometer-adjustable sensing distance / sensitivity — Sturdy metal or plastic enclosures — Metal versions with Teflon front cap — Temperature range: -25°C up to +70°C — Sensing distances: 10 mm up to 30 mm — Cable / connector versions — 10 – 60 V DC or 20 – 250 V AC — PNP / NPN or AC versions, relay output — NO / NC versions — Short circuit-proof versions — Function and operating voltage indicators

— Versions for flush and non-flush mounting — AC and DC sensors available — High switching frequencies up to 300 kHz — Fully encapsulated versions to protection class IP67 — Sturdy metal and plastic enclosure — Temperature range: -25°C up to +70°C or -40°C up to +100°C — Sensing distances: 10 mm up to 15 mm — Cable / connector versions — 10 – 36 V DC or 20-250 V AC — PNP / NPN or AC versions — NO / NC versions — Function indicators — Short circuit-proof versions — Versions with IO-Link

The OPTISENS ORP 8590 is an ORP sensor for general water and wastewater applications. The sensor type is equipped with a platinum electrode, a large ceramic diaphragm and a temperature sensor (Pt100). It features a robust design with CPVC body material. The sensor is available with an attached cable up to 10 m / 33 ft. It can be installed directly into a pipe or tank with the 3⁄4 NPT (male) process connection. The ORP sensor operates with the MAC 100 or any suitable analytical transmitter.

Ideal for shear studs and threaded studs High repeatability Hydraulic plunge damper Standard support with 2 legs Body Polyamid Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

The model K 24 is a robust stud welding gun, especially for studs ø 19 - 22 mm Ideal for welding shear connectors Ideal for through-deck-welding td High repeatability Hydraulic plunge damper Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Use this fall protection roller glider in lifeline systems and in temporary kernmantle cable lifeline solutions. Designed for kernmantle cables up to Ø 14 mm Suitable for use in a lifeline system (Ø 8 mm or Ø 6 mm) Detachable glider

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article.The linear movement of a flexible steel cable, which can have a length of up to 5 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum. Two roller units at the cable entry allow for up to 20° <) deflection of the cable.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 40 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

The linear movement of a flexible steel cable up to 2m long is converted into a rotary movement by a measuring drum. A return spring prevents the steel cable from sagging. The measuring drum is connected to a pulse generator, which generates two pulses every 0.1 mm offset by 90°. The measuring drum winds the steel cable in a single layer so that the resolution is independent of the position. The rope entry is protected against dirt by brushes.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 30 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 3 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

Please note that this product is an accessory. In the "Products" section you will find the corresponding encoders that you can order for your selected article. The linear movement of a flexible steel cable, which can have a length of up to 60 m, is converted into an rotary movement with the aid of a measuring drum. The measuring drum is connected to the shaft of an encoder. In this way a change in displacement of the measuring cable causes the shaft of the encoder to rotate by a directly proportional amount which can be recorded. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The nozzle, through which the cable enters the drum, is protected with a brush and a bellow to prevent water or dust entering the drum.

The linear movement of a flexible steel cable, which can have a length of up to 2 m, is converted into an angular movement with the aid of a measuring drum. The measuring drum is coupled via a gear to a conductive plastic potentiometer. The restoring force of the spring drive holds the measuring cable tight at all times and prevents any sagging which would otherwise induce an error. The measuring drum moves axially on a spindle ensuring that the cable is wound up precisely and reproducibly wrap for wrap in the helical groove of the drum. The cable entry contains a brush to remove dust.

-sturdy frame with fork sleeves and release mechanism -can be secured to prevent slipping -pallet cage is secured by a tension fixture -a steel cable holds the lid open -forward and backward movement -restrictor valve enables smooth regulation of the emptying speed -fixture to hook up hydraulic hoses, steel cable and safety chain -Finish: hot-dip galvanized Types available -Type KG-A, emptying is controlled by the forklift hydraulic system -Type KG-B, manual emptying and adjustable dumping brake -Type KG-C, manual emptying

Metal connectors with self tapping screws are provided for the fast connection of rubber belts using a cordless screwdriver. FTK connectors are also available for round balers and in a special version for grape harvesting machines. Our steel connectors come in galvanised steel or non magnetic stainless steel. FTK connectors can be installed just using a cordless screwdriver because the screws are self tapping. No hole drilling is needed. FTK connectors are available with screws and connecting cables in lengths up to 3,000 mm, depending on belt width. A variety of connecting rods, lock washers and screws is also available for the initial installation of FTK connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 cross head bits and a magnetic bit holder.