Shielding - Import export

Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology

-These sturdy snowdozers are available in 4 types (Type SCH-S steel shield trim, Type SCH-G rubber shield trim, Type SCH-V polyurethane shield trim, Type SCH-F spring-loaded shield trim, simple pick-up using forks) -can be secured to prevent slipping -adjustable shield, to the right or left -edge trim screwed to the shield; quick change possible The economic alternative: Type SCH-L

• Face shield to protect against class 1 (4kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• Face shield to protect against class 2 (7kA) arcing faults • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The face shield is used with a head gear (GFKKH200) • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities • High impact strength • Good UV-protection

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• Face shield to protect against class 2 arcing faults (7 kA / 423kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The visor is manufactured from 2,0mm-thick green Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • For better protection of the ears, the visor is extended toward the back • The visor can be folded up and can be locked in place in any position by means of a screw connection • For protection against heat entering through the bottom edge of the shield, the visor has a chin protection with a Nomex bib

• Face shield to protect against class 1 arcing faults (4 kA / 135 kJ/m²) • Tested in accordance with DIN EN166, as well as the GS-ET-29 test principle and is VDE-approved • The electrician´s face shield is made entirely of plastic • The flexible plastic profile fits on many helmets • The visor is manufactured from 1,5mm-thick Polycarbonate • It has excellent optical qualities, and its light transmittance VLT (D65) according to ISO 10527:2007 i ≥75% • The visor can be folded up and can be locked in place in any position by means of a screw connection • The electrician´s face shield is attached in a non-slip manner by means of a wide, adjustable elastic band

• This face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • The face shield has recesses on the side and is a perfect fit on the ear protection hard hat bracket • Also available with non-fogging treated inner side

• The aluminium hard hat bracket fits current full brim helmets (Schuberth SUP) • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener

• The aluminium hard hat bracket fits the MSA V-Gard; Centurion Vulcan 12 and 25 and UVEX AIRWING helmets • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener

• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare

In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-6

• The aluminium hard hat bracket with cover fits all standard hard hats • The bracket is easy to attach to the hard hat • Secure fit on the hard hat due to a powerful tension spring • The bracket is made of robust aluminium profiles and is heat and corrosion resistant • The broad overlapping of the profiles ensures a good seal at the top. The cover provides an additional seal against dust and debris • The face shields can be lifted into 4 positions • The face shields are attached with a rotating fastener or with a clip fastener

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shade 4-6 • Additional protection of neck and chin due to fully enclosed face shield

Wipers for steel bars In the production of pipes and steel bars, socalled wipers are used for leaning. The wipers have a round or rectangular outer profile and an inner profile that matches the shape of the object to be cleaned. Normally, several wipers are mounted in series, whereby the passthrough openings are smaller than the profile. The bar is pushed through the elastomer plates at high velocity, and the rubbery material strips the surface free from grease and cleaning fluid residues. It is the edge that counts! Just a like a car window wiper, it is the edge that counts. Normally, the wipers are stamped from sheet goods. During stamping, the elastomer becomes distorted; the inner edge is therefore not dimensionally stable and is at an angle. Only part of the edge wipes emulsions from the surfaces depends on the profiles. This edge is rapidly worn down; the cleaning action is then unsatisfactory. Streakfree cleaning

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to+135°C • Good UV protection • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-5

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extemes approx. -50°C to +135°C • Good UV protection • High impact strength • IR-protection shades 4-4 and 4-5 available • Additional protection of neck and chin due to fully enclosed face shield

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • High impact strength • Additional protection of neck an chin due to fully enclosed face shield • Also available with non-fogging treated inner side

• The face shield is made of 1 mm thick Polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C to +135°C • Good UV protection • High impact strength • 94% of the radiant heat is reflected by the gold layer • IR-protection shade 4-4

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. -50°C bis +135°C • Good UV protection • Additional protection of the forehead due to the extended face shield • The face shield fits on the GFKKH100 headgear

• The face shield is made of 1,25 mm thick Cellulose-Acetate • Excellent optical quality • Resistance to temperature extremes up to +90°C • Available with welding protection shade 5 • Good resistance to chemicals • Lower notched impact strength

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • Additional glare protection due to green tinting (welding protection shade 2,5) • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s)

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Also available with non-fogging treated inner side

Heat transfer films for easy to peel heat transfers. ✔ Easy peel ✔ High-gloss finish ✔ Great price ✔ Thermally stabilized ✔ Hot or cold peel! Our release film SHIELD SR is created to be used with toner based printing technologies. The 23um thick PET film is coated with our unique SHIELD SR release coating, which add gloss and protection to your prints. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after application or to peel it with a delay. The SR version is designed as an all-rounder, combining good resistance against cremes, water and mechanical damage. The standard core size is a 6'' core with a film length of 3000m per roll. Custom rolls can be made.

In the areas where seller and customer meet in direct contact, special hygiene regulations must be observed in the current situation. The spitting protection "Construct" is optimally suited to protect employees and customers. The shapely aluminium square tube provides the stable frame around the plastic pane. This is crystal clear and with a size of 1,000 mm width and 500 mm height, it offers exactly the right hygiene protection. The entire frame has a height of 750 mm, which allows the possibility of a pass-through in the lower area. The height of the pass-through is 250 mm. Would you like the product in a different format? No problem. Please contact us! We recommend cleaning the material with a soft microfibre cloth and warm soapy water.

In the areas where seller and customer meet in direct contact, special hygiene regulations must be observed in the current situation. The spitting protection "Construct" is optimally suited to protect employees and customers. The shapely aluminium square tube provides the stable frame around the plastic pane. This is crystal clear and with a size of 1,000 mm width and 500 mm height, it offers exactly the right hygiene protection. The entire frame has a height of 750 mm, which allows the possibility of a pass-through in the lower area. The height of the pass-through is 250 mm. Would you like the product in a different format? No problem. Please contact us! We recommend cleaning the material with a soft microfibre cloth and warm soapy water.

• The face shield is made of 1 mm thick polycarbonate • Excellent optical quality • High resistance to temperature extremes approx. –50°C to +135°C • Good UV protection • High impact strength (B – 120 m/s) • Additional protection of neck and chest area due to the large PVC-bib • Also available with non-fogging treated inner side