Results for
FRIEDRICH AUGUST PICARD GMBH & CO. KG
Germany
As the name indicates – the aluminium hub of the contact wheel FAPI-PA SMOOTH is coated with a smooth para rubber coating. While a coating height of 20 mm has established itself as the standard, the coating height is variable as desired. The smooth design of the contact wheel is suitable for the heaviest grinding and roughing. It is also attractive due to its long service life. Advantages The contact wheels of the FAPI-PA – series are coated only with para rubber. The para rubber (PA) coated contact wheels are in practice often simply called “rubber coated contact wheels” or rubber contact wheels. Benefits of contact wheels with this design: Highest service life Wear-resistance Oil-resistance Grease-resistance Emulsion-resistance We will be happy to advise you in order to find a suitable contact wheel for you.
Request for a quoteTROTEC GMBH
Germany
COMMERCIAL DEHUMIDIFIER TTK 570 ECOOur value-for-money champion for commercial dehumidification and dry keeping If your credo in looking for a dehumidifier is "to get as much as possible out of as little as possible" the TTK 570 ECO is the ideal drying unit for your requirements. This construction dryer unites professional performance characteristics and a budget-friendly design and can withdraw a daily maximum of 127 litres of water from the room air. The robustly manufactured TTK 570 ECO presents itself with a solid steel construction in carriage design, as such it also leaves a good impression in rough construction site conditions. The combination of ergonomic push handle, large full-rubber wheels and feet with rubber buffers at the front affords ideal handling characteristics, simple transportation and secure footing for drying applications.
Request for a quoteA & C DUSTBINS & WASTE BINS WEBER GMBH & CO.KG
Germany
Nominal volume: 80 L Nominal loading capacity: 40 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 by compact injection moulding process from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, insensitive to temperature variations and chemicals + stepped comb-lift, reinforced with ribs, for maximum safety when emptying the waste bins + very stable; fitted with 200 mm diameter solid, quiet-running rubber wheels + corrosion-resistant, zinc-plated steel axle + lid with drip edges minimises the escape of condensation water + the waste bins are available in standard colours grey, green and brown; additional colours available + with chipnest in the frontal comb to accommodate transponders (RFID chips), + compatible with the most widely-used ID and weighing systems + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate noise level
Request for a quoteA & C DUSTBINS & WASTE BINS WEBER GMBH & CO.KG
Germany
Nominal volume 240 L Nominal loading capacity 96 Kg + manufactured by compact injection moulding process in accordance with DIN EN 840 and RAL GZ 951/1 + produced from specially developed, high molecular weight, high-density polyethylene (HDPE) + UV-stabilised for outdoor use, resistant to chemicals and temperature variations + emptied by a stepped comb-lift, shape A + quiet-running, solid rubber wheels, standard diameter 200 mm, also available with 250 mm diameter + corrosion-resistant, zinc-plated steel axle + all usual colours and combinations (e.g. grey, blue, green or yellow) available + ready to accommodate data carriers/transponders (chipnest) + marked with the appropriate noise level and the CE symbol in accordance with the regulations of directive 2000/14/EC + smooth surfaces facilitate easy cleaning + the lid is equipped with ergonomic handles + stacking ribs allow for high stacking + all parts of the wheelie bins can be recycled at the end of their useful life
Request for a quoteA & C DUSTBINS & WASTE BINS WEBER GMBH & CO.KG
Germany
Nominal volume 140 L Nominal loading capacity 56 Kg + manufactured in accordance with DIN EN 840 and RAL GZ 951/1 from specially developed, high molecular weight, high-density polyethylene (HDPE) + manufactured by the compact injection moulding process + durably UV-stabilised, extremely resistant to cold, heat and chemicals + optimal pouring receivers through stepped ridge bar + sturdy lid with ergonomic handles + continuous handle-grip + smooth surfaces allow for quick cleaning + external solid rubber wheels ensure good stability and stable running + corrosion-protected steel axle + available in all standard colours (e.g. grey, green, blue or brown) + manufactured ready to accommodate data carriers/transponders + complies with the noise control regulation in accordance with EC directive 2000/14/EC and is marked with the appropriate decibel level + all parts of the wheelie bins can be fully recycled at the end of their useful life
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TORWEGGE GMBH & CO. KG
Germany
Elastic rubber : - wheel body made of plastic with roller bearing - tread made or elastic solid rubber, approx 65° shore A, - blue or grey wheel color - runs quietly, non-marking - absorbs vibration The material solid rubber is especially suitable for uneven and hard fl oors because of the soft and elastic tread. Our elastic solid rubber wheels are available with different wheel center and bearings.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Heavy-duty castors with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyamide 6 can absorbs and release moisture - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyamide (PA 6) is a high-quality plastic with a high load-carrying capacity. Polyamide is hygienic and odorless. It is also resistant to salt water, as well as many acids and alkalis up to a certain concentration. This material is often used in the food and pharmaceutical industries.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Standard castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Smooth running polyurethane castor with polyurethane wheel - polyamide 6 wheel body with ball bearing - polyurethane tread, approx. 95° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Standard castor with elastic rubber wheel - wheel body made of plastic with roller bearing - tread made of elastic solid rubber, approx 65° shore A - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. The material solid rubber is especially suitable for uneven and hard fl oors because of the soft and elastic tread. Our solid rubber wheels are available with diff erent shore hardness, tires, wheel center and bearings.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Heavy-duty double castor with polyurethane wheel - wheel body made of special grey cast iron with ball bearing - tread made of molded polyurethane, approx. 95° shore A - heavy welded steel construction The strongest Torwegge housing series consist of a welded steel construction for maximum dynamic stresses. The swivel castor housings are equipped with sealed axial rib ball bearing an tapered roller bearing and thus particularly sensitive against surges and beats. The housing head is screwed and secured by a heavy center bolt. The material polyurethane (PU) has a high load capacity with low abrasion. It also features high chemical resistance. These properties make polyurethane suitable for almost any application. In addition, PU offers low rolling resistance.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
Standard castor with thermoplastic rubber wheel - polypropylene wheel body with ball bearing - grey thermoplastic rubber tread, approx. 85° shore A - with thread guards to protect the ball bearing from dust and dirt - standard steel sheet housing, galvanized Torwegge‘s standard housings are made from deep-drawn, galvanized steel sheet. The solid-riveted, double ball bearing in the slewing ring delivers an advantageous price-performance ratio when used for hand-held logistics applications. Castors in standard housing are commonly used by a variety of sectors in transport racks. They can carry a max. load of 1,200 kg at 4 km/h. Thermoplastic (TPE) has a higher load capacity than rubber. These grey tires minimize the impact on your fl oors, providing a comfortable ride without leaving traces. Some contact discoloration may result from the oil-bearing material when the tires are left motionless for longer periods on sensitive floors.
Request for a quoteTORWEGGE GMBH & CO. KG
Germany
-Pneumatic tires -steel center rim with ball bearing Air-filled tires made of rubber provide excellent comfort, especially when rolling over uneven floor surfaces. Our pneumatic tires can be customized according to their wheel diameter, profile types, wheel bodies and cover thickness so that they are suitable for a wide range of diff erent applications.
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
We carry various PVC hoses, silicone-free, various Shore hardnesses and winding strengths. You will receive yard ware or lengths on request from us. We would be pleased to mount the hoses on the corresponding product. Antistatic versions are also available. Hoses sample (more hoses for tube-ø: 20-108 mm on stock) PVC 54x2 PVC hose (silicone-free) For tube ø: 60 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey PVC 45x2 PVC hose (silicone-free) For tube ø: 50 mm Shore hardness: approx. 58° (+/- 3 Shore) Colour: light grey
Request for a quoteGLÄSNER SANDSTRAHL MASCHINENBAU GMBH
Germany
Suitable for all common blast-media, mobile version, with one axis, two solid rubber wheels and a frame to relocate the system. The top side of the pressure pot works as a filling sinkhole, automatic filling valve, closable inspection plate, blast media volume adjustment-unit, Pipes R 1 ¼”, Pressured-air stop valve, Pressured-air entry-coupling, air-taking device for protective hood, tank coupling R 1 ¼” to connect blast hose.
Request for a quoteResults for
Rubber wheels - Import exportNumber of results
16 ProductsCompany type