Results for
CONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
Various requirements are imposed on modern device connection technology today. The main issues are progress in miniaturisation in engine and machine design as well as applications with increased power requirements. Safe data transmission must always be guaranteed, even in harsh environmental conditions. For connection on the device side, CONEC offers a broad range of unit side connectors. Fields of application are, amongst others: distribution cabinets, engine and speed sensor connection technology
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Application: Panel insert for thermocouple and RTD citcuits. Mounting by means of a stainless steel bracket and two screws. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different pin thicknesses. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.
Request for a quoteINFICON GMBH
Germany
The INFICON Vacuum Gauge Controller 031 (VGC031) is designed for use in conjunction with the INFICON Pirani Gauge Enhanced 050 (PGE050) and acts as a convenient power supply, control and readout. VGC031 and PGE050 are a flexible combination to monitor your vacuum system in the range from 1.3 × 10 -4 up to 1333 mbar (1 × 10 -4 up to 1000 Torr). The VGC031 with its space saving panel mount housing supports a variety of technical features as 2 set point relays, 4 user selectable analog outputs and offers additionally RS232/ RS485 digital interfaces. The bright, sharp and clear OLED display with the integrated keypad user Interface rounds out this user friendly vacuum gauge controller package. The rugged industrial design makes the VGC031 in combination with the convection enhanced PGE050 gauge sensor a very good choice for many vacuum applications were economical vacuum measurement from low to high vacuum range is required. VGC031 controller and PGE050 convection enhanced vacuum...
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Metal wall mount for 5 A4 display panels. • Robust and durable wall mount made of powder-coated steel sheet • Capacity: For 5 display panels in A4 format (not included in the delivery) • Practical pivot mechanism for simple replacement of the displays • Easy assembly • Mounting of multiple wall brackets possible in rows • Ideal for permanent use in industry and trades companies
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Metal wall mount for 10 A4 display panels. • Robust and durable wall mount made of powder-coated steel sheet • Capacity: For 10 display panels in A4 format (not included in the delivery) • Practical pivot mechanism for simple replacement of the displays • Easy assembly • Mounting of multiple wall brackets possible in rows • Ideal for permanent use in industry and trades companies
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a magnetic wall mount and 5 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 5 SHERPA display panels in A4 format • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Metal wall mount with magnetic back, can be fastened quickly and easily to metal surfaces such as shelves or machine frames • Practical pivot mechanism for simple replacement of the displays • 5-year warranty
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete designer set consisting of a wall mount and 10 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 10 SHERPA® display panels in A4 format • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Incl. tabs with blank insert sheets for labelling the display panels • Practical pivot mechanism for simple replacement of the displays • 5-year warranty • Easy assembly of the bracket
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a wall mount and 10 SHERPA® A4 display panels. • Complete display panel set for wall applications • Wall mount with 10 SHERPA® display panels in A4 format (colour -00: 5 units each in red and black, colour -22: grey and black) • Polypropylene display panels with coloured profile frame and low-reflection film suitable for scanners • Incl. tabs with blank insert sheets for labelling the display panels • Practical pivot mechanism for simple replacement of the displays • 5-year warranty • Easy assembly of the bracket
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Complete set consisting of a metal wall mount and 10 FUNCTION SAFE A4 display panels. Zippable panels for better document protection. • Complete display panel set for wall applications • Wall-mounted display panel system with 10 FUNCTION SAFE display panels in A4 format • Zip closure on the side of the display panels protects documents against moisture and dirt • Robust and durable wall mount made of powder-coated steel sheet • Display panel made from crystal-clear hard film with reinforced tab in 5/5 division and blank insert sheet • Practical pivot mechanism for simple replacement of the displays • Ideal for use in kitchens, production plants or shops such as butcheries and bakeries • Easy assembly
Request for a quoteDURABLE HUNKE & JOCHHEIM GMBH & CO. KG
Germany
Robust clip frame for quick motif change due to proven folding technique. UV-resistant thanks to low-reflection protective film. • Robust DIN A4 aluminium snap frame, silver anodised • Quick and easy motif change due to proven folding technique • Low-reflection, UV-resistant protective cover • Impact-resistant polystyrene back panel • Mitred corners • Concealed wall mounting holes for screwing on or hanging or permanent attachment with self-adhesive strips supplied • Attachment options for use in portrait and landscape format • Incl. mounting material consisting of screws, dowels and four self-adhesive strips
Request for a quoteBERNSTEIN AG
Germany
The aluminium control enclosure CC-5000 neXt offers a unique design with a number of accessories such as the status light. The rounded contours ensure the enclosure is highly recognisable in machinery and mechanical engineering applications. — Customised solutions to your specifications — Innovative and modern industrial design — Freely selectable width and height (max. 1.000 x 1.000 mm) — Depths from 75 mm up to max. 370 mm — Rounded edges, no risk of physical injury — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Optimum heat dissipation due to aluminium sections — Integrated recessed grips for simple handling — Protection class IP65 — Internally-mounted front panel — Door configurations for direct access to the interior — Slimline design for configuring flat screen systems
Request for a quoteBERNSTEIN AG
Germany
The CC-4000 / CC-4000 SL are modular aluminium control enclosure systems. With their outstanding technical features, the enclosures simply and efficiently encapsulate industrial controllers and operator control panels for centralised and decentralised automation in production processes. — Customised solutions to your specifications — Simple and modern industrial design — Freely selectable width and height (max. 800 x 800 mm) — Depths from 52 mm up to max. 646 mm — High-quality extruded aluminium sections (naturally anodised) — Coloured areas that emphasize the design — Optimum heat dissipation due to aluminium sections — Integrated handle elements with vertical section — Protection class IP65 — Front panels internally-mounted or externally-mounted — Internal grooves for fixing components — Product features SL (in addition to CC-4000) - Two enclosure depths (55 und 99 mm) - Slimline design - For encapsulating flat IPCs
Request for a quoteBERNSTEIN AG
Germany
The CC-3000 light-duty operating enclosure is particularly suitable for encapsulating operator control panels, industrial computers and display components and, thanks to its modular concept, can be simply adapted to versions tailored to specific customer requirements. — Customised solutions to your specifications — Monitor-based industrial design — Freely selectable width and height (max. 600 x 600 mm) — Depths from 120 mm up to max. 255 mm — High-quality extruded aluminium sections (naturally anodised) — Customised colours from RAL range — Five possible enclosure designs — Optimum heat dissipation due to aluminium sections — Front panels internally-mounted or externally-mounted — Protection class IP65 — Screw-fixed or hinged rear panel — Internal grooves for fixing components — Extensive range of accessories
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
CONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
CONEC Hybrid connectors soon to be certified according to IEC standard 61076-2-118. For conventional wiring of motors, servo-drives or linear units / drives, time and costs for cabling, maintenance and diagnostics are very high. Separate cables from the switch cabinet are used for the power supply and control of every single motor. This procedure does not only require much space, but also causes high costs. With the new CONEC series, a compact hybrid connector system has been developed, combining power supply and data transmission in one single connector. This technology is equivalent to the modern connection and interface wiring technology.
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
Electric drives, devices and servomotors are increasingly being used in the field directly in the machine or system. In addition to signals and data, more and more power must also be transmitted. Miniaturisation in automation means that field devices and controllers are becoming smaller and smaller. The CONEC Power portfolio includes overmoulded connectors, connectors field attachable and panel mount connectors. The coding options offered are K, L, S, T
Request for a quoteCONEC ELEKTRONISCHE BAUELEMENTE GMBH
Germany
CONEC offers a comprehensive range of M8x2 and M12x1 sockets for reflow soldering processes. Insulation bodies and female/male sockets are available in different positions and different codings for front panel mounting. The male sockets come with gold-plated contacts, guaranteeing minimum 100 mating cycles. Options are installation heights of 6 mm, 10 mm, 9 mm and 13 mm and versions with or without shielding. The sockets are available as individual parts for manual mounting or as tape & reel packaging for automatic mounting.
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Pressure Compensated Throttle Check Valves PNDRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ With pressure compensating feature via built-in compensating piston ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: 210 bar / 3000 PSI
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Throttle Check Valves for In-Line Assembly DRV ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Check Valves for Manifold Mounting DRVP ▪ Throttle and shut-off the flow of liquid media in direction A-B (free flow in reverse direction) ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Throttle Valves for In-Line Assembly DV ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for in-line assembly with female BSP, NPT and SAE threaded connections ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Manifold Mounting DVP ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for manifold mounting with either 4 or 6 mounting holes ▪ Graduated turning knob and coded spindle to accurately control flow ▪ Set-screw located on side of turning knob to lock valve in position ▪ Panel mounting nuts available on request ▪ Maximum working pressure: up to 350 bar / 5000 PSI Throttle Valves for Cartridge Assembly DVE ▪ Throttle and shut-off the flow of liquid media in both directions ▪ Designed for direct installation into...
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
Gauge Isolator Valves SWS-S1 (Single Station) ▪ Effective protection of pressure gauges against overload caused by pressure peaks ▪ Suitable for panel installation ▪ Push button to read and turn to lock ▪ Multilingual instructions printed on face plate ▪ Maximum working pressure: 400 bar / 5800 PSI Gauge Isolator Valves SWS-A1/A2 (Single Station) ▪ Effective protection of pressure gauges against overload caused by pressure peaks ▪ Designed for in-line assembly (type A1) or 90° assembly (type A2) with female BSP / male BSPT, female NPT / male NPT or female NPT / male SAE threaded connections ▪ Panel mounting nuts available on request ▪ Rotating swivel nut allows for accurate orientation of the pressure gauge ▪ Maximum working pressure: 400 bar / 5800 PSI
Request for a quoteMAYSUN SOLAR
Germany
Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product details Product number: MS(390-410)MDG-40H Power: 410W Solar panel with cells cut in three parts Mechanical data Solar cell: monocrystalline silicon Cells: 120 cells cut in half (5*24) Dimension: 1760 x 1098 x 28mm Weight: 19,5kg Glass: 1.6mm (0.063 inch), high transmission index glass, AR coated and heat strengthened glass Encapsulation material: POE Frame: 28mm (1,10 inch)black, anodized aluminum alloy Junction box: IP68 rating Cable: photovoltaic technology cable 4.0 mm² (0.006 in².). N 3000 mm/P 300 mm (11.81/11.81 in.) length can be customised. Connector: MC4 compatible Pallt:39 pcs
Request for a quoteMAYSUN SOLAR
Germany
Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Mechanical data Solar cell: monocrystalline silicon Cells: 120 cells cut in half (5*24) Dimension: 1760 x 1098 x 28mm Weight: 19,5kg Glass: 1.6mm (0.063 inch), high transmission index glass, AR coated and heat strengthened glass Encapsulation material: POE Frame: 28mm (1,10 inch)black, anodized aluminum alloy Junction box: IP68 rating Cable: photovoltaic technology cable 4.0 sq. mm (0.006 in².). N 1000 mm/P 1000 mm length can be customised. Connector: MC4 compatible Note: This product is available in two cable lengths,300mm and 1000mm Pallet: 39 pcs
Request for a quoteMAYSUN SOLAR
Germany
Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com MECHANICAL DATA Solar Cells Mono: 158.75x79.375mm Cell Orientation: 144 cells (6x 24) Module Dimensions: 2018x1002x30mm(79.44x39.45x1.18 inches) Weight: 23kg Glass: 3.2mm High Transmission,Antireflection Coating Encapsulant Material: EVA/POE Backsheet: White Frame: 30 mm (1.18 inches) Anodized Aluminium Alloy J-BoX: IP68, 3 Bypass Diodes Cables: 4.0mm²,Portrait:300mm(+)/300mm(-) Connector: MC4 Compatible
Request for a quoteMAYSUN SOLAR
Germany
Latest information. Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product Details Product number: MS(390-410)MB-40H Power: 410W Mechanical Data Solar cell: monocrystalline silicon Cells: 80 cells cut in half (5*16) Dimension: 1760 x 1098 x 30mm Weight: 21,5kg Glass: 3.2mm (0.13 inch), high transmission rate, AR coated and heat strengthened glass Encapsulation material: EVA Back: White Frame:30mm (1.18 inch) anodised aluminium alloy Junction box: IP68 rated Cable: PV technology cable 4.0 sq. mm (0.006 sq. in.) N 300 mm/P 300 mm (11.8/11.8 in.) length can be customised. Connector: MC4 Pallet: 37/39 pcs
Request for a quoteMAYSUN SOLAR
Germany
Latest information: Maysun Solar's new limited time winter sale is on! Several European warehouses now have stock in stock!!! Don't hesitate to contact us to enquire and join the pre-order and purchase queue!!! For a quicker response, send a message to maysunsolarmiddleeast@gmail.com Product Number: MS(395-415)MB-54H Power: 410W Solar cell: monocrystalline silicon Cells: 108 cells cut to 1/2 Dimension: 1722 x 1134 x 30mm Weight: 22kg Glass: 3.2mm (0.13inch), Anti-reflective coating, high transmission, low iron content, toughened glass Encapsulation Material: EVA/POE Back: Black Frame: Black anodised aluminium alloy Junction box: IP68 rated Cable: TUV 1*4.0 mm² Portrait:(✚):300mm/(-):300mm Custom length Connector: MC4 Packing: Pallet: 37pcs
Request for a quoteResults for
Panel mount - Import exportNumber of results
38 ProductsCompany type