Openers - Import export

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

The twisterchain product line offers a wide range for circular movements and is available in four sizes. Modular in width and radius, therefore flexible in applications where rotary and spiral movements up to 360° and more with high loads and smooth operation are required. The twisterchain applications are available with guide trough, which has the following advantages: guidance of the energy chain, reduced abrasion of the energy chain, optimal operational smoothness, rotation angle up to 360° from stock. - Strong, high fill weights, smooth operation, weight-optimised - Rotary speeds up to 1m/s and more - Circular/spiral movements up to 360° from stock (up to 400° upon request) - Cable-friendly, smooth interior crossbars openable along the inner and outer radius - Successfully tested for over 1 million cycles in the igus laboratory

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

Plus Soft-Close / Push-Open Adapter, colour grey, 37 mm row of hole

The BEHN + BATES-TOPLINE® 300 BEHN + BATES fully automatic open-mouth bag filling system TOPLINE® 300 is the fully automatic open-mouth bag filling system for powders & flours

Use: Enables neat connection of thermocouple cables to devices or terminal rails. This is advisable particularly in the case of small conductor dimensions. Mechanical design: • Solid thermocouple material.

Pneumatic heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Swing away 90° ✔ Pull out base plate This heavy-duty heat press is great for small to medium businesses. Due to its pneumatic closing mechanism, it is easy to operate without exhausting your arm. The pull-out base and the rotatable head make it even easier to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings and a valve controls the air pressure. To safely operate the press, two buttons need to be pressed on each side of the machine to lower the heated element. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Electric double heat press for textile transfers. ✔ Double platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ Up to 40x50cm base plate ✔ No compressor ✔ Laser guides This fully electric double heat press is designed for medium size productions without compressed air. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. And while one side is pressing, you have time to prepare the other for the next cycle. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings. In automatic mode, the machine will automatically close and open the press as well as move it from one platen to the other based on set timings. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Star Track Push-Open Hinge, protruiding cranking 0 mm, drilling distance 45 mm, without spring, material: steel nickel plated

The contact wheel FAPI-VUS OPEN is a further development of the dense model. Here the aluminium core is coated alternately with a long and short lamellae of foamed up Vulkollan® . The overall height of the coating must also be adapted to the respective application and is therefore variable (standard: 35 mm). The open model cools better, or respectively it dissipate heat better. The precise adaptation of the soft running cushion to the workpiece makes it possible to achieve high performance results when finishing. Advantages The contact wheels of the FAPI-VUS – series are coated only with lamellae of foamed up Vulkollan® Benefits of contact wheels with lamellae of foamed up Vulkollan® : Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

The contact wheel FAPI-PUS OPEN is a further development of the dense design. Here the aluminium core is coated alternately with a long and short polyurethane foam lamella. The overall height of the coating is also adaptable to the respective application and is therefore variable (standard: 35 mm). Because of the variant of the open design, the abrasive belt can better cool because the heat from the belt sanding process is better dissipated. Through the precise adaptation of the extremely soft running cushion to the workpiece that shoud be found it is possible to achieve high-performance results when finish grinding. Advantages The contact wheels of the FAPI-PUS – series are coated only with polyurethane foam lamellae. Benefits of contact wheels with polyurethane foam lamellae: Highly elastic (adaptable) Wear-resistance Oil-resistance Grease-resistance We will be happy to advise you in order to find a suitable contact wheel for you.

Electric heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ 30 x 40cm base plate ✔ No compressor ✔ Pull out base plate This neat looking heat press is great for small businesses and DIY. The fully electric heat press is designed for small quantities. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. Using a small display, you can adjust temperature and dwell time to your likings and save pre-sets for reoccurring applications. In automatic mode, a small sensor closes the press once the base plate is pushed in all the way. This press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more. Works perfectly with all kinds of transfers from DTF to screen printed or vinyl.

Manual clam shell type heat press for textile transfers. ✔ Singe platen ✔ Even temperature and pressure ✔ Opens automatically ✔ Up to 50 x 60cm base plate ✔ Magnetic closure ✔ Pull out base plate This quality heat press is great for small businesses. With a long lever it is easy to close this clam shell type heat press. Once closed, a magnet holds the press shut and automatically opens once the set dwell time is reached. The pull-out base makes it even easy to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and a rotary know allows to set the pressure. Last, a special coating on the heated element avoids stains. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

The 700 VA series float valve allows infinite adjustment of the level and has a flat float rod for mounting variable floats. It is suitable for use at high and low pressure and high temperatures up to 120°C, but not for use in drinking water. The stainless steel float model is suitable for simple mechanical regulation of levels in the food, pharmaceutical and chemical industries due to the VA materials and silicone seals.

The stainless steel valve 500 regulates levels even at high temperatures and in chemical liquids. Available in various sizes.

Brass float valve with high filling capacity. This is the PVA Series 8 external thread open type. This float valve is combined with hollow float balls made of high-quality PE-HD plastic (max. 70 °C), alternatively also with copper or stainless steel balls.

Office trolley open on three sides with 6 shelves for folders, office equipment, etc. • Versatile multifunctional trolley for storing electronic devices and office utensils • Mobile and safe to move (4 castors, 2 with brakes) • Six sturdy shelves (16 mm) to hold folders, paper and office appliances, etc. • Open on 3 sides for easy access • Easy assembly with instructions enclosed • Each shelf can hold up to 25 kg. Total load-bearing capacity 60 kg

Our open-die forging presses play an important part among the forming presses. Siempelkamp supplies complete open-die forging presses equipped with manipulators and ancillary equipment such as lifting turntables and quite a number of additional components. Our presses operate reliably, fast and precisely, operating at pressing forces between 10 and 160 MN. The range of presses available comprise push-down or pull-down designs, two- or fourcolumn designs with oil-hydraulic or water-hydraulic drives. High-stroke frequency contributes to the eciency of these presses. Our customers produce bars, discs, rings, and anges from materials such as steel, high-alloy steel, nickel-based alloys, titanium, and aluminium on these presses. They prefer to order turn-key plants including integrated manipulators, turntable, die magazine, and die-changing system.

Universal input 100 to 240 V AC, constant voltage, current limited, low standby power, High efficiency, continuously short circuit proof, Leakage current ≤ 100 μA, small package, without active fan. Additional information •Protection Class: I •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •Working temperature: 0°C - 80°C •Humidity: 5% to 95% •Standard: IEC60601-1 •Frequency: 50 / 60 Hz •Family : OF65 •AC Input: flat pin connector •Output voltage tolerance: +2% / -2%

Additional information•current 2: 5000 mA •Output voltage 2: 5 V •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Family : OF250 •AC Input: flat pin connector •Frequency: 50 / 60 Hz •Standard: IEC60601-1, EN61558 •Unit: OF •Humidity: 5% to 95% •Working temperature: 0°C - 60°C •Storage temperature : -40°C - 70°C •Input tolerance: +10% / -10% •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Input voltage: 100-240 V •Spec.0 cover sheet FW-Type: OF250-24 •DC output: flat pin connector •Current: 10500 mA •Protection Class: II •Output voltage: 24 V

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The 1B-237 from EMKA is a compression latch with visual open indicators . Its compact, rigid, lightweight, design with an IP 65 rating is constructed out of Zinc die GD-Zn with a polyurethane foam seal making it resistant to shock and vibration. Its open status is visible even from a distance thanks to its red ring. It is mountable with a screw-on method.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001.

• made from a single piece • a heavy-duty tool • surface refined

• very robust kitchentool • forged and ground blade • with circumferential guard as finger protection

• with the rubber band the opener gets a good grip on the lid • that way jars, bottles and tubes can be opened easily • also ideal as can puncher/cap lifter

• helps opening screw cap and crown cap bottles • releases the vacuum of jars • is a great assistant for opening beverage cans

• nicely shaped • heavy diecasted quality • very agreeable to hold

• cap lifter, screw cap opener and bottle sealer - all in one • the rubberised surface permits an air-tight sealing of the bottle

• small, compact, easy to store in the drawer • fine chrome-plating • transport wheel and knife from special, tempered steel