Oil heating - Import export

Because the oil heating units come with an integrated fuel tank you won’t need any cumbersome or bulky external fuel tanks, giving you even more freedom and mobility when it comes to choosing the right place for installation. The light yet sturdy undercarriage with extra-large wheels allows you to transport and install the units quickly and easily and because the units are so mobile they can be quickly and easily moved around building sites and over rough and bumpy terrain, even single-handedly if need be. The units’ solid and strikingly simple construction guarentees a reassuringly high level of reliability and a blissfully low level of maintenance. Needles to say safety is always first and foremost with the oil heating units in the IDS Series: The units are standard-equipped with an electronic flame safeguard, safety thermostat for overheat protection and fully automatic aftercooling.

ELECTRIC HEATER FAN TDS 50 EPowerful mobile heating in a trice The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home. With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle. Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.

OIL HEATER FAN IDE 60 DThe integrated fuel tank makes the high-performance direct oil heater fan IDE 60 D our best recommendation for use on construction sites, in halls and so forth! Whether for direct permanent heating in agriculture and production, on construction sites or in storage facilities – there are many typical standard oil heating tasks where sound technology with ideal value-for-money ratio and a high 60 kW heat output is called for. Our response: The oil heater fan IDE 60 D. This ready-for-use heating device is a particularly efficient directly fired oil heater fan and due to its durable housing made of doubly coated material is optimally prepared for various heating applications in well-ventilated areas. In the course of this, the IDE 60 D’s large air outlet ensures a maximum expansion of warm air with a high efficiency level of 100 %.

OIL HEATER FAN IDE 80Our most powerful indirect oil heating fan IDE 80 is our recommendation for construction sites, halls, agriculture and workshops! So much hot air for so little money — this is the successful concept of the IDE series which also applies to its currently largest member. The oil heater fan IDE 80 has a heating capacity of 80 kW setting new standards for its own class as well as for heating at construction sites, in workshops and halls as well as in agriculture. The optional flue gas discharge allows flexible use of the indirect-fired oil heater fan IDE 80 for heating enclosed spaces. The IDE 80 is then fired with diesel or fuel oil. Continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss injection pump. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

OIL HEATER FAN IDE 30Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 30 If you are looking for an equally cost-effective and reliable oil heating solution with clean, dry, warm air for the flexible heating of workshops, storage and production zones, construction sites or halls, the compact oil heater fan IDE 30 is our best recommendation. Owing to its durable housing made of doubly coated material, this indirectly fired oil heater fan is optimally prepared for outdoor heating applications and can further be used for heating closed rooms when applying the optionally available flue gas discharge. The firing of the IDE 30 can variably be made with diesel or fuel oil, the constant supply of which is ensured by a high-quality Danfoss injection pump. The external fuel filter enables an easy access and the current amount of fuel can conveniently be read from the integrated tank filling level indication.

OIL HEATER FAN IDE 20Flexible all-rounder for a wide range of heating applications: the ultramobile oil fan heater IDE 20 Hot air in a trice at a low price: The smallest oil heater fan of the IDE series from Trotec comes up trumps if you are looking for a compact and low-priced yet reliable oil heating solution for flexible heating applications. Whether in workshops, warehouses, production zones or on construction sites – with a heating capacity of 20 kW the IDE 20 confidently generates clean and dry hot air in quantities of up to 600 m³/h. Even longer outdoor applications present no obstacle to the oil heater fan IDE 20, because it is provided with a durable housing made of doubly coated material, borne by a smooth-running carriage construction with cable holders and installed fuel tank. When employing the optionally available flue gas discharge, this heating device can also be flexibly used for the fully automatic heating of closed rooms.

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

IDS 30 OIL HEATER FANMobile heating power on wheels: The IDS 20 D direct heaters for fast, uncomplicated heating With robust design, the oil heater IDS 30 has everything you need for an economic and effective heating application. This device from the IDS pro series is very flexible. On the one hand, its carriage with big wheels enables a quick transport and easy set-up even on building sites and uneven terrain. On the other hand, there is no need for an external oil tank because of the integrated fuel container. The oil heater fan is originally "Made in Europe" and as standard equipped with electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling. Additionally, the double-walled housing with protective coating increases safety at work by minimizing the surface temperature of the outer casing and thus the risk of injuries and further offers an effective soundproofing.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

CSN® tank heating units are particularly suitable for the direct heating of liquids (Oil, Water, Emulsions), air and gases. They contribute to the avoidance of paraffin clouds in fuel oil or Diesel storage tanks. In relation to the process, we provide you with tank heating units with tubular heating elements made of stainless steel which we adjust to the respective application situation and the medium to be heated in consultation with you. We offer our series “THF” a suspended, on a chain flexible solution to keep heating oil or diesel fuel in the extraction line pumpable. As a fixed version, we recommend our industrial immersion heaters for heating liquids. Further information about our CSN® Tankheizkörper

Whether you want to reliably keep construction zones warm, effectively heat larger halls, protect your livestock from the cold or keep your work material free of ice despite low temperatures: with 100 kW of direct heating power the IDE 100 D provides a high heating capacity for every demand with 100 % efficiency. The integrated oil burner of this heating device can be fuelled by either diesel or fuel oil. The continuous fuel supply to the stainless steel combustion chamber is regulated by means of a high-quality Danfoss® injection pump. Safe operation of the oil heater fan is ensured by an electronic flame trap and an integrated overheating protection. Among the further assets are the easily accessible, external fuel filter as well as the possibility to easily read the remaining fuel volume at the filling level indication integrated in the tank.

The IDS 100, our second-strongest model of this series of mobile indirect oil heaters, provides powerful mobile heating power Manufactured in Europe, the oil heater fan IDS 100 with a nominal heat input of up to 117.26 kW and an air flow rate of 5,500 m³/h quickly and effectively heats storage and production halls, workshops, building sites and greenhouses. This is ensured by the integrated oil burner with Suntek pump. Of course, your safety is our top priority. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

ELECTRIC HEATER FAN TDS 29 EWarm. Warmer. Hot! Ideal mobile heating solution. The mobile heater TDS 29 E is an ideal heating solution that can be applied basically everywhere. Equipped with a hard-wearing housing and a convenient carrying handle, the robust device impresses when heating construction trailers, workshops, warehouses, halls and boathouses. Via the integrated thermostat control, the warm air flow of the TDS 29 E can be infinitely and precisely adjusted to the desired temperature. The two-stage power control for needs-based adjustment of the heat output allows for perfect temperature control of every room. Beyond that, fan operation without heating function is also possible. Like all devices of that series, the TDS 29 E produces non-condensing heat without consuming oxygen or producing combustion gases – this makes it particularly suitable for indoor use. For here, the use of oil and gas heating devices is often undesirable or even prohibited.

Different applications require different designs for an optimal fit, so we provide Shell & Tube heat exchangers in single tube design with plain, low and high fin tubes and also with compact fin bundles. The plain tube design is most suitable if media have similar heat transfer properties, where the compact fin design means the best possible performance if there is a substantial difference in heat transfer rate, for example when exchanging heat between oil and water. The low and high fin single tube solution is between the previous two designs in order to further optimize on flow, pressure drop and velocities of media.

The higher process temperatures, the higher the technical requirements for the temperature machine. Decades of experience in construction of temperature machines for heat carrier oil applications up to 400°C makes us the preferred partner of many customers for applications of this kind, particularly in the area of pressing and extrusion. Dimensioning of our teco tt/th series up to 400°C is based on DIN 4754. Design and technical configuration of all temperature controllers are based on the requirements of this norm. Exact film temperature calculation ensures, in combination with flow monitoring, efficient and at the same time reliable operation in all operating conditions. A lockable filter in the circulating medium return line is a standard installation; another installed feature is an expansion vessel with a cold oil container for reliable prevention of damage by oxidation due to oxygen accumulation in the heat carrier.

Thermal oil systems are used in countless production processes: the process heat conveyed by using thermal oil is needed in a number of industries. Büttner's triedand-tested thermal oil heaters are heated with ue gas and are designed as single-pass Systems.

The secondary heating system is an integral part of the ContiRoll® and one of the decisive factors for its optimal functioning. For a perfectly dimensioned secondary heating system signicantly contributes to its eciency. The oil is heated in the boiler house to the temperature required and delivered to the primary circuit. The secondary heating station maintains the temperature in the secondary circuit to the press at set temperature by mixing the oil returning from the press that has already cooled down with the hotter oil of the primary circuit. The thermal oil transfers its thermal energy via hot platens, roller rods, steel belts to the mat to be pressed. Features Advancing temperature of the primary circuit is 280 °C Quick-acting aps for immediate re protection Heating circuits for setting the temperature distribution required by the respective process over the entire press length

Newly designed slotted jets arranged throughout the entire operating width guarantee constant flow conditions in the drying compartment. Depending on the coating material, the air is heated via hot water, thermal oil or steam in special heat exchangers. Particularly intensive drying is achieved through the high air speed in the jet channel.

Super Screw connectors are available in different versions of textile reinforced rubber abrasion resistant, heat resistant, oil and grease resistant, white FDA, self extinguishing, with textile on the running surface or in stainless steel. Screws are available in either galvanised or stainless steel. Super Screw connectors are inserted in the belt diagonally and from both sides. After the rubber layer is removed, the connector is installed using just a cordless screwdriver or, in underground mining, using a breast drill or pneumatic screwdriver. Super Screw® connectors are pre installed, depending on the belt width, in lengths up to 3,000 mm or in rolls up to 25,000 mm long. A variety of screws is also available for the initial installation of the connectors or as spare parts, plus various cordless screwdrivers, a pneumatic screwdriver, brace, PZ 2 or PZ 3 cross head bits and a magnetic bit holder.